摘要
用于碱性锌锰电池的锌粉在投产前都必须测定析气量，通常将使用的锌粉制成ＬＲ１４ 电池，采用２Ω恒电阻连续放电４ ．５ｈ 后在７０ ℃下贮存７ｄ ，如果锌粉释放出的气体量不高于负极集流体端部密封圈防爆孔开启压力的１０ ％ ～２０ ％ ，则该锌粉就可以使用。然而，有些合金锌粉在电池部分放电（ 如放电４０ｍｉｎ） 后析气量剧增，为了研究锌粉的析气行为，我们测试了不同规格电池和锌粉在电池部分放电后的析气量，结果显示，Ｇｒｉｌｌｏ 公司研制的一种新型锌粉在电池部分放电后析气量非常低，文章讨论了该锌粉的析气量和放电行为。
The suitability of zinc powder to manufacture any size of primary alkaline cells is often tested in LR14 cells which are discharged for 4.5 hours under a constant load of 2 ohm and stored at 70℃ for 7 days.If the zinc powder does not develop more gas than a volume which leads to a pressure in the cells of less than 10% to 20% of the opening pressure of the venting device of the current collector assembly,such powder may be acepted for general cell production.Some zinc powder alloys,however,may exhibit much ...
出处
《电池工业》
CAS
1999年第4期123-127,共5页
Chinese Battery Industry
关键词
碱性锌锰电池新型锌粉
部分放电
析气量
析气行为
电性能
New types of zinc powder of alkaline Zn/MnO_2 cells
Discharged for a shorter time
Separate out gas volume
Behavior of separate out gas
Discharge performance
