Analytical and Experimental Studies on Critical Blank-holder Forces in Cylindrical cup deep drawing 被引量：4

Analytical and Experimental Studies on Critical Blank-holder Forces in Cylindrical cup deep drawing

在线阅读下载PDF

导出

摘要 Based on the plastic deformation theory and energy method, the critical blank-holder forces (BHF) of wrinkling and fracture in the cylindrical cup deep-drawing are analyzed. The verify experiments were performed and compared with the theory analysis results. The predictions agree well with the experiment results. Thus, the validated presenttheoretical analysis model may be applied to determinate the suitable BHF.

作者 Lin Zhongqin Sun Chengzhi Chen Guanlong Yu Haiyan

机构地区 School of Mechanical Engineering

出处《上海交通大学学报》 EI CAS CSCD 北大核心 2004年第z2期101-107,共7页 Journal of Shanghai Jiaotong University

基金 This research was supported by the National Natural Science Foundation of China

关键词 blank-holder force WRINKLE LIMIT fracture LIMIT sheet metal forming FORMABILITY window

分类号 N55 [自然科学总论]

引文网络
相关文献

参考文献1

1赵军,张双杰,曹宏强,李硕本.拉深过程智能化控制中的法兰起皱临界条件[J].燕山大学学报,1998,22(3):197-201. 被引量：30

共引文献29

1钱志平,马瑞,赵军,杨嵩.Intelligent control technology for deep drawing of sheet metal[J].Journal of Central South University,2008,15(S2):273-277.
2谢晖,钟志华.基于CAE和神经网络的压边力优化[J].机械工程学报,2004,40(7):105-109. 被引量：20
3林忠钦,于忠奇,孙成智,陈关龙.变压边力条件下铝合金板的成形窗口[J].中国有色金属学报,2005,15(8):1162-1166. 被引量：10
4刘隽,纪元法,孙希延.板料拉伸成形多点压边力优化[J].模具工业,2005,31(11):7-10. 被引量：2
5龚红英,付群强,朱伟,张质良.变压边力控制与矩形件拉深成形特性的相关性研究[J].塑性工程学报,2005,12(6):49-55. 被引量：8
6赵军,马瑞,杨嵩,苏春建.盒形件法兰皱曲失稳的临界条件[J].锻压技术,2006,31(5):124-126. 被引量：13
7朱伟,董湘怀,张质良,舒世湘.圆筒件拉深成形临界防皱变压边力加载曲线研究[J].塑性工程学报,2007,14(1):109-114. 被引量：5
8赵军,杨嵩,马瑞,苏春建.智能化拉深控制中的侧壁起皱临界条件[J].塑性工程学报,2007,14(3):121-124. 被引量：3
9杨嵩,赵军,马瑞,苏春建.智能化拉深控制中的法兰起皱临界条件[J].制造业自动化,2007,29(6):95-98.
10杨嵩,赵军,马瑞,苏春建.金属板材拉深智能化控制系统[J].电子科技大学学报,2007,36(5):973-976. 被引量：1

同被引文献35

1余海燕,陈关龙,林忠钦,李淑慧.新型多点变压的压边力控制系统研制[J].塑性工程学报,2004,11(5):29-32. 被引量：10
2邓陟,陈鹤峥.杯形件压延承载能力和极限压延系数确定[J].清华大学学报（自然科学版）,1989,29(2):87-95. 被引量：4
3万敏,杨玉英,李硕本.圆锥形零件的冲压成形极限[J].哈尔滨工业大学学报,1995,27(4):121-125. 被引量：5
4张志远,赵升吨,张永,王骥,袁建华.圆筒形件拉深失稳及各因素影响分析[J].机械工程学报,2007,43(3):154-159. 被引量：13
5BARATA MARQUES M J M,BAPTISTA R M S O.Theoretical and experimental analysis of axisymmetrical deep drawing[J].Journal of Materials Processing Technology,1990,24:53-63.
6SHENG Z Q,JIRATHEARANAT S,ALTAN T.An adaptive FEM simulation for prediction of variable blank holder force in conical cup drawing[J].International Journal of Machine Tool & Manufacture,2004,44(5):487-494.
7潘志,贺祖琪.数学手册[M].徐州:中国矿业大学出版社,1973.
8YOSSIFON S,TIROSH J.Rupture instability in hydroforming deep-drawing process[J].Int.J.Mech.Sci.,1985,27(9):559-570.
9Miller W S, Zhuang L. Recent development in aluminium alloys for the automotive industry[J]. Mater Sci Eng A, 2000, A280:37-49.
10SUN Cheng-zhi, CHEN Guan-long, LIN Zhong-qin.Novel algorithm for dertermining optimal blankholder forces in deep drawing of aluminum alloy sheet [J].Trans Nonferrous Met Soc China, 2004, 14(4):676-680.

引证文献4

1林忠钦,于忠奇,孙成智,陈关龙.变压边力条件下铝合金板的成形窗口[J].中国有色金属学报,2005,15(8):1162-1166. 被引量：10
2秦泗吉.轴对称拉深成形凸缘变形区应力的解析求解[J].机械工程学报,2011,47(24):20-25. 被引量：10
3曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报,2013,49(2):42-48. 被引量：8
4Miao-yan CAO,Chang-cai ZHAO,Guo-jiang DONG,Sheng-fu YANG.Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J].Transactions of Nonferrous Metals Society of China,2016,26(8):2188-2196. 被引量：1

二级引证文献28

1苌群峰,李大永,彭颖红,曾小勤.AZ31镁合金盒形件变压边力温热拉延工艺[J].中国机械工程,2006,17(S1):16-18. 被引量：3
2秦泗吉,熊柏青,陆宏,张婷婷.轴对称拉深成形法兰变形区临界压边力(英文)[J].中国有色金属学会会刊：英文版,2012,22(S2):239-246. 被引量：2
3刘晓晶,闫巍,郭立伟.铝镁合金双路径加载充液拉深成形的数值模拟[J].中国有色金属学报,2008,18(4):698-702. 被引量：14
4王会廷,高霖,沈晓辉,陈明和.铝合金2A12-O的动态充液拉深[J].中国有色金属学报,2010,20(5):840-845. 被引量：7
5王会廷,彭飞,邰阿媛,章静,闫军.斜凸缘锥形件充液拉深中预胀作用研究[J].锻压技术,2012,37(3):31-35. 被引量：3
6曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报,2013,49(2):42-48. 被引量：8
7秦泗吉,梁韶伟,张树栋.轴对称拉深成形法兰区起皱失稳变形能及临界压边力[J].中国机械工程,2013,24(23):3244-3248. 被引量：6
8余业煌,周艳,赵仕宇,詹艳然.TRIP盒件拉深成形中压边力加载曲线的优化[J].热加工工艺,2014,43(1):151-154. 被引量：1
9周杰,戴洪,陈勇锋,陆俊江,姚小兵.拉深翻边复合成形工艺参数多目标优化设计[J].上海交通大学学报,2014,48(3):412-416. 被引量：4
10孙钿科,王绍清,于红娟,李芳,曲庆文.基于Dynaform仿真拉深成形过程参数研究[J].机械科学与技术,2014,33(4):541-545. 被引量：3

1Sun Chengzhi Chen Guanlong Lin Zhongqin.The Effect of Variable Blank-Holder Forces on the Formability of Aluminum Alloy Sheets during Sheet Metal Forming[J].上海交通大学学报,2004,38(z2):54-60. 被引量：1
2Cai Yifa(Dept of Math & Computer SciencesDundee Institute of Technology Dundee DD1 1HGUnited Kingdom)(Division of Adaptive Neural SystemsZhejiang UniversityHangzhou 310027PR China).Experimental Studies of Adaptive Conscious Systems[J].Journal of Systems Engineering and Electronics,1994,5(1):25-35.
3The Excellent Foundry Paper Evaluation Committee of FICMES.Evaluation result of the 17th "FOSECO Cup" best foundry papers of 2014[J].China Foundry,2015,12(5):384-387.
4章亮炽,余同希.THE ELASTIC-PLASTIC BENDING AND WRINKLING OF THIN CIRCULAR PLATES[J].Chinese Science Bulletin,1990,35(19):1602-1607.
5董镇喜.THE SENSITIVITY OF THE PRIMARY VALUE PERTURBATION, MIXING AND ENTROPY ON DYNAMICAL SYSTEMS[J].Chinese Science Bulletin,1992,37(5):370-374.
6Excellent Foundry Paper Evaluation Committees of FICMES.Announcement of Evaluation Result of the 14th “FOSECO Cup” Excellent Foundry Papers (2011)[J].China Foundry,2012,9(3):279-282.
7Information for Authors[J].Journal of University of Science and Technology Beijing,2004,11(3).
8Ahmed Ramahi Yahya Saleh.Design, Fabrication and Experimentation of a Deep Drawing Machine[J].Journal of Mechanics Engineering and Automation,2014,4(10):804-812.
9The opening of “Foying Gorge Cup ”international natural waters drift game[J].重庆与世界（Hello重庆）,2014(14):14-17.
10宋海涛,隋淑英,朱平,董朝红,张林.Wrinkle Resistant Finishing of Cotton Fabrics with the Complex System of PBTCA/CA[J].科技信息,2011(3). 被引量：1

上海交通大学学报

2004年第z2期

浏览历史

内容加载中请稍等...