Preparation, microstructure and properties of Al-Zn-Mg-Sc alloy tubes 被引量：7

Preparation, microstructure and properties of Al-Zn-Mg-Sc alloy tubes

导出

摘要 The Al-6.0Zn-2.0Mg-0.2Sc-0.10Zr hollow tube ingots, prepared by semi-continuous casting technology, were subjected to ho- mogenization treatment, hot extrusion, intermediate annealing, tension, solution and aging treatment. The microstructures and properties of as-cast Al-Zn-Mg-Sc alloy at different homogenization treatment conditions were studied using hardness measurement, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. The results showed th... The Al-6.0Zn-2.0Mg-0.2Sc-0.10Zr hollow tube ingots, prepared by semi-continuous casting technology, were subjected to ho- mogenization treatment, hot extrusion, intermediate annealing, tension, solution and aging treatment. The microstructures and properties of as-cast Al-Zn-Mg-Sc alloy at different homogenization treatment conditions were studied using hardness measurement, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. The results showed th...

作者何振波尹志民林森邓英商宝川周向

机构地区 School of Materials Science and Engineering Northeast Light Alloy Co.

出处《Journal of Rare Earths》 SCIE EI CAS CSCD 2010年第4期641-646,共6页 稀土学报（英文版）

基金 Project supported by the National Science and Technology Ministry (2007BAE38B06)

关键词 Al-Zn-Mg-0.2Sc alloy TUBES processes microstructure properties rare earths Al-Zn-Mg-0.2Sc alloy tubes processes microstructure properties rare earths

分类号 TG146.2 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献15

1贺永东,张新明,游江海.复合添加微量Sc,Zr对Al-Zn-Mg-Cu合金组织性能的影响[J].稀有金属材料与工程,2007,36(4):665-670. 被引量：39
2戴晓元,夏长清,古一.Al-Zn-Mg-Cu-Sc-Zr系富Al角相图评估[J].材料导报,2006,20(11):77-79. 被引量：3
3戴晓元,夏长清,刘昌斌.钪对Al-Zn-Mg-Cu-Zr合金组织性能的影响[J].稀有金属材料与工程,2006,35(6):913-916. 被引量：26
4杨志强,尹志民.俄罗斯铝-钪合金的研究与开发[J].轻合金加工技术,2003,31(11):34-36. 被引量：23
5尹志民,姜锋,潘青林,郭飞跃,朱大鹏,宋练鹏,曾渝,王涛.Microstructures and mechanical properties of Al-Mg and Al-Zn-Mg based alloys containing minor scandium and zirconium[J].中国有色金属学会会刊：英文版,2003,13(3):515-520. 被引量：23
6O.N. Senkov,S.V. Senkova,M.R. Shagiev.Effect of Sc on Aging Kinetics in a Direct Chill Cast Al-Zn-Mg-Cu Alloy[J]. Metallurgical and Materials Transactions A . 2008 (5)
7Yin Zhimin,Pan Qinglin,Jiang Feng,Li Hanguang.Scandium and Its Alloys. . 2007
8Xiao Yaqing,Xie Shuisheng,Liu Jingan.Handbook of Alu- minum Fabrication Technology. . 2005
9Wu Lingmei,Wang Wen-Hsiung,Hsu Yung-Fu,Trong Shan.Effects of homogenization treatment on recrystallization be- havior and dispersoid distribution in an Al-Zn-Mg-Sc-Zr alloy. Journal of Alloys and Compounds . 2008
10Wu Lingmei,Martin Seyring,Markus Rettenmayr,Wang Wen- Hsiung.Characterization of precipitate evolution in an artificially aged Al-Zn-Mg-Sc-Zr alloy. Journal of Materials Science . 2010

二级参考文献72

1梁文杰,潘青林,朱朝明,何运斌,刘元斐,尹志民.微量Sc对Al-Cu-Li-Zr合金的微观组织和拉伸性能的影响[J].稀有金属材料与工程,2006,35(4):550-553. 被引量：12
2赵中魁,周铁涛,刘培英,陈昌麒.Al-Zn-Mg-Cu-Li-Er合金时效组织中Er相的TEM观察[J].稀有金属材料与工程,2004,33(10):1108-1111. 被引量：22
3李海,郑子樵,王芝秀.热处理制度对含Ag的7055铝合金断裂特征的影响[J].稀有金属材料与工程,2005,34(4):612-616. 被引量：15
4戴晓元,夏长清,吴安如,王银娜,邰凯平.微量钪对Al-9.0Zn-2.5Mg-1.2Cu-0.15Zr合金组织性能的影响[J].矿冶工程,2005,25(5):70-73. 被引量：8
5.Al-Cu-Li-Sc-Zr系01460和01464高强可焊合金.莫斯科全俄轻合金研究院资料[R].,2000..
6.Al-Mg-Li-Sc系01424型可焊合金.莫斯科全俄轻合金研究院资料[R].,2000..
7Milman Y V,Sirko A I,Lotsko D V et al.Mater Science Forum[J],2002,(396～402):1127
8XiaChangqing(夏长清) ZengFanhao(曾凡浩) GuYi(古一).中国有色金属学报,2003,13(3):546-546.
9XiaChangqing(夏长清) ZengFanhao(曾凡浩) GuYi(古一).中国有色金属学报,2003,13(5):1124-1124.
10Zeng Fanhao,Xia Changqing,Gu Yi.Journal of Alloys and Compounds[J],2004,363:175

共引文献103

1杨建华,李振亮,任慧平,王玉峰,陈伟,翟景.喷射沉积含Sc超高强铝合金固溶处理组织与性能分析[J].内蒙古科技大学学报,2009,28(1):45-49. 被引量：2
2高利坤,陈云.A study on the rare earth ore containing scandium by high gradient magnetic separation[J].Journal of Rare Earths,2010,28(4):622-626. 被引量：8
3周昌荣,潘青林,王新宇,梁文杰,尹志民.含钪Al-Cu-Li合金的形变时效研究[J].金属热处理,2004,29(10):1-4. 被引量：5
4黄兰萍,陈康华,李松,刘红卫.高温预析出对Al-Zn-Mg铝合金组织、力学性能和应力腐蚀性能的影响[J].中国有色金属学报,2005,15(5):727-733. 被引量：40
5胡国强,夏长清,戴晓元,刘昌斌.加钪对Al-Zn-Mg-Cu-Zr合金组织性能的影响[J].有色金属加工,2005,34(3):7-10. 被引量：1
6潘青林,刘元斐,梁文杰,朱朝明,何运斌,尹志民.微量Sc对Al-Cu-Li-Zr合金组织与性能的影响[J].兵器材料科学与工程,2005,28(4):10-13. 被引量：1
7张雪飞,温景林,周天国,王顺成,李俊鹏,李罡.Al-Sc合金的现状与开发前景[J].轻合金加工技术,2005,33(8):7-9. 被引量：8
8李文斌,潘清林,刘俊生,梁文杰,刘晓艳,何运斌.回归再时效处理对含Sc超高强Al-Zn-Mg-Cu-Zr合金组织与性能的影响[J].稀有金属材料与工程,2010,39(9):1646-1650. 被引量：3
9王少刚,向定汉,郑勇.含钪铝合金的钎焊工艺[J].焊接学报,2005,26(10):39-42.
10戴晓元,夏长清,吴安如,王银娜,邰凯平.微量钪对Al-9.0Zn-2.5Mg-1.2Cu-0.15Zr合金组织性能的影响[J].矿冶工程,2005,25(5):70-73. 被引量：8

同被引文献45

1朱大鹏,尹志民,滕浩,潘青林.微量Sc和Zr对Al-Mg-Mn合金组织和性能的影响[J].宇航材料工艺,2004,34(6):45-49. 被引量：9
2何运斌,潘青林,刘元斐,朱朝明,梁文杰,尹志民.Sc和Zr复合微合金化对Al-Zn-Mg-Cu合金组织与性能的影响[J].轻合金加工技术,2005,33(9):41-43. 被引量：10
3毛建伟,金头男,徐国富,聂祚仁.As-cast microstructure of Al-Zn-Mg and Al-Zn-Mg-Cu alloys added erbium[J].中国有色金属学会会刊：英文版,2005,15(6):1341-1345. 被引量：6
4贺永东,张新明,尤江海.Effect of minor Sc and Zr on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy[J].中国有色金属学会会刊：英文版,2006,16(5):1228-1235. 被引量：20
5贺永东,张新明,游江海.复合添加微量Sc,Zr对Al-Zn-Mg-Cu合金组织性能的影响[J].稀有金属材料与工程,2007,36(4):665-670. 被引量：39
6聂波,尹志民,朱大鹏,彭勇宜,姜锋,黄继武.Effect of homogenization treatment on microstructure and properties of Al-Mg-Mn-Sc-Zr alloy[J].Journal of Central South University of Technology,2007,14(4):452-455. 被引量：8
7ZOU Liang, PAN Qing-lin, HE Yun-bin, WANG Chang-zhen, LIANG Wen-jie. Effect of minor Sc and Zr addition on mierostruetures and mechanical properties of AI Zn Mg-Cu alloys [J]. Transactions of Nonferrous Metals Society of China, 2007, 17(2): 340 345.
8CHEMINGUI M, KHITOUNI M, MESMACQUE G, KOLSI A W. Effect of heat treatment on plasticity of AI Zn Mg alloy: Microstructure evolution and mechanical properties [J]. Physics Procedia, 2009, 2(3): 1167-1174.
9WERENSKIOLD J C, DESCHAMPS A, BRECHET Y. Characterization and modeling of precipitation kinetics in an AI-Zn-Mg alloy [J]. Materials Science and Engineering A, 2000, 293(1/2): 267-274.
10DEV S, ARCHIBALD STUART A, RAVI DEV KUMAAR R C, MURTY B S, PRASAD RAO K. Effect of scandium additions on microstructaJre and mechanical properties of AI-Zn-Mg alloy welds [J]. Materials Science and Engineering A, 2007, 467(1/2): 132-138.

引证文献7

1余灿梅,谢金财,刘崇宇,江鸿杰,秦芳诚.加工转速对含Sc 7055合金组织与力学性能的影响[J].特种铸造及有色合金,2022,42(4):455-458.
2张志野,潘清林,周坚,刘晓艳,陈琴.Hot deformation behavior and microstructural evolution of Al-Zn-Mg-0.25Sc-Zr alloy during compression at elevated temperatures[J].Transactions of Nonferrous Metals Society of China,2012,22(7):1556-1562. 被引量：3
3李波,潘清林,李晨,张志野,尹志民.Hot compressive deformation behavior and constitutive relationship of Al-Zn-Mg-Zr alloy with trace amounts of Sc[J].Journal of Central South University,2013,20(11):2939-2946. 被引量：2
4倪维源,杨尚磊,贾进,白建颍,丁波.高速列车用高强A7N01铝合金焊接接头的组织与性能[J].热加工工艺,2014,43(19):22-25. 被引量：13
5张欣,王泽华,ZHOU Zehua,XU Jianming.Influence of Rare Earth(Ce and La) Addition on the Performance of Al-3.0 wt%Mg Alloy[J].Journal of Wuhan University of Technology(Materials Science),2017,32(3):611-618. 被引量：7
6王凯先,尹登峰,胡婷,卢少康,付理,王华,韦道明.微量钪、锆对Al-Zn-Mg合金铸态组织演变的影响[J].金属热处理,2019,44(3):50-57. 被引量：8
7汤晓漪,应韬,杨剑英,李德江,曾小勤.Zn与Mg质量比对热挤压Al-Zn-Mg-Sc显微组织及力学性能的影响[J].铸造技术,2020,41(3):208-213. 被引量：1

二级引证文献34

1侯艳喜,徐荣正,李慧,崔盛林.A7N01P-T4铝合金对-搭接结构的搅拌摩擦焊技术研究[J].特种铸造及有色合金,2019,39(1):95-100. 被引量：2
2张利东,王英君,刘平,雷金琴,王强,罗建华.Fe、Si、Mn、Cr元素对Al-4.6Zn-1.2Mg合金板材焊接热裂纹敏感性的影响[J].轻合金加工技术,2015,43(12):50-54.
3黄星,潘清林,李波,史运嘉,黄志其,刘志铭.双级时效对含Sc的Al-Zn-Mg-Zr合金组织与性能的影响[J].中南大学学报（自然科学版）,2015,46(11):4034-4043. 被引量：6
4王梦寒,王根田,王瑞.Flow stress behavior and constitutive modeling of 20MnNiMo low carbon alloy[J].Journal of Central South University,2016,23(8):1863-1872. 被引量：1
5何亚玲,张志斌,李明星,廖潇垚,胡洁,王晓敏.合金元素含量对A7N01-T4铝合金微观结构与性能的影响[J].腐蚀与防护,2016,37(11):908-912. 被引量：3
6朱云鹏,解品,金培鹏.Mg-5Sn-2.5Pb镁合金的热变形行为及加工图[J].材料热处理学报,2017,38(6):195-200. 被引量：8
7王玉玺,史春元,金成.焊缝低配度对铝合金焊接接头强度的影响[J].兵器材料科学与工程,2017,40(4):33-36.
8谭谦,邓运来,王冯权,单朝军.疲劳循环对A7005铝合金型材组织与力学性能的影响[J].热加工工艺,2017,46(18):47-51. 被引量：2
9石康柠,曹益,梁志敏.不同冷却方式对7系铝合金MIG焊接头组织和力学性能的影响[J].热加工工艺,2018,47(5):54-57. 被引量：3
10贾旭,战雪,周鑫弘.动车组客室座椅椅腿开裂试验研究[J].城市轨道交通研究,2019,22(2):79-83. 被引量：4

1MA Dang-shen,ZHOU Jian,CHEN Zai-zhi,ZHANG Zhong-kan,CHEN Qi-an,LI De-hui.Influence of Thermal Homogenization Treatment on Structure and Impact Toughness of H13 ESR Steel[J].Journal of Iron and Steel Research International,2009,16(5):56-60. 被引量：12
2王岭,田素贵,孟凡来,杜洪强.Influence of hot extrusion on microstructure and mechanical properties of AZ31 magnesium alloy[J].中国有色金属学会会刊：英文版,2006,16(A03):1770-1773.
3张德尧.Al-Zn-Mg-Sc系热强可焊铝合金[J].稀有金属快报,2001,20(1):11-14. 被引量：5
4Tang Bin, Hu Xinfang, Xu Kewei School of Materials Science and Engineering, Xi′an Jiaotong University, Xi′an 710049 Wang Congzeng Research Institute of Surface Engineering, Taiyuan Polytechnic University, Taiyuan 030024.FABRICATION OF HIGH-MELTING POINT METAL COATING[J].中国有色金属学会会刊：英文版,1997,7(4):89-92. 被引量：3
5刘北兴,覃耀春,冯海波,李仁顺.Effect of homogenization treatment in electric field on microstructure and properties of 1420 Al-Li alloy[J].Journal of Harbin Institute of Technology(New Series),2001,8(2):164-167.
6何振波,赵延阔,王晓峰,尹志民,李红英,崔建忠.Al-Zn-Mg-Sc合金连续冷却转变曲线的测定[J].材料与冶金学报,2010,9(1):43-50. 被引量：3
7王少刚,向定汉,郑勇.含钪铝合金的钎焊工艺[J].焊接学报,2005,26(10):39-42.
8Jia-nan Liu,Wei Liu,Guo-yi Tang,Ru-fei Zhu.Influence of intermediate annealing on the microstructure and texture of Ni-9.3at%W substrates[J].International Journal of Minerals,Metallurgy and Materials,2014,21(2):162-168. 被引量：2
9商宝川,尹志民,周向,何振波,林森.固溶-时效对Al-Zn-Mg-Sc-Zr合金板材组织与性能的影响[J].中国有色金属学报,2010,20(11):2063-2069. 被引量：9
10Zen Sumin(Southwest Aluminum Fabrication Plant, Chongqing 631326, China).RESEARCH ON A NEW FORGING TECHNIQUE—SHORT-HOLLOW-RAPID DIE FORGING[J].Journal of Central South University,1997,9(1):46-48.

Journal of Rare Earths

2010年第4期

浏览历史

内容加载中请稍等...