摘要
将环氧树脂和固化剂按不同比例配合后摇匀,分别涂抹在SLS烧结件上,测试SLS烧结件的固化时间和固化强度;并对涂抹后的SLS烧结件放在恒温干燥箱,研究不同温度下对烧结件的影响.结果表明,固化剂的用量和固化环境温度对烧结件有一定影响.
Mix the different proportion of the column and epoxy resin and shake,then apply the mixture to the surface of the SLS sintered parts,the curing time and curing strength of SLS of sintered parts were tested.Then put the smeared SLS sintered part into oven the influence of the sintered parts under the different temperature is studied.The experiment result shows that the amount of curing agent and the curing ambient temperature have a certain impact of the sintered parts.
出处
《西安工程大学学报》
CAS
2012年第6期771-773,共3页
Journal of Xi’an Polytechnic University
关键词
树脂
固化时间
尺寸变形
固化强度
resin
curing time
size distortion
curing intensity
