CONJUGATE CAM WITH FIVE-BAR LINKAGE MECHANISM FOR RAPIER DRIVE OF FLEXIBLE RAPIER LOOMS 被引量：2

CONJUGATE CAM WITH FIVE-BAR LINKAGE MECHANISM FOR RAPIER DRIVE OF FLEXIBLE RAPIER LOOMS

在线阅读下载PDF

导出

摘要 A new type of rapier drive for flexible rapier loom through conjugate cams with five-bar linkage mechanism is raised and analyzed. Two designs suitable for the conversion of 1515-190.5 shuttle looms are given as examples. This mechanism can be applied to traditional shuttle looms as well as to new flexible rapier loom design. A new type of rapier drive for flexible rapier loom through conjugate cams with five-bar linkage mechanism is raised and analyzed. Two designs suitable for the conversion of 1515-190.5 shuttle looms are given as examples. This mechanism can be applied to traditional shuttle looms as well as to new flexible rapier loom design.

作者张建毕丽蕴

出处《Journal of China Textile University(English Edition)》 EI CAS 1997年第4期71-75,共5页

关键词 RAPIER LOOM CONJUGATE CAM LINKAGE mechanism rapier loom, conjugate cam, linkage mechanism

分类号 TS135 [轻工技术与工程—纺织材料与纺织品设计]

引文网络
相关文献

同被引文献13

1Li,Kerang(李克让),Chen,Ming(陈明).An Analysis of the Orthogonal Crank-rocking Lever Spatial Mechanism for the Weft Insertion in Rapier Looms[J].Journal of Donghua University(English Edition),2001,18(1):27-31. 被引量：6
2郑智毓,陆宜.TT96型剑杆织机引纬系统的测试分析[J].纺织学报,2004,25(4):73-74. 被引量：11
3刘富强,黄建斌,郭云生,高东海.两种淬火油对板簧热处理质量影响的研究[J].热加工工艺,2004,33(12):45-47. 被引量：9
4Chen Y F,Hong H C.Theory and Use of Rapier Loom. . 2005
5Elliptic-Gear&Eccentric Slider-Crank&Unifor m-Pitch Screw Weft-Insertion Mechanis m. CN,200720191925.4 . 2008
6Shen GS.C401S Rapier Loom. . 1993
7蒋秀明,杨建成.螺旋推进式传剑机构的分析与设计[J].纺织学报,1998,19(1):22-25. 被引量：2
8刘春燕,周丹晨,李昌安,李敬民.60Si2MnA钢簧片失效分析及热处理工艺[J].金属热处理,2010,35(2):73-76. 被引量：12
9张春林,白士红.打纬共轭凸轮机构的设计[J].北京理工大学学报,2000,20(1):33-36. 被引量：13
10马向东.TP500剑杆织机保护系统的分析[J].纺织学报,1991,12(12):25-28. 被引量：1

引证文献2

1陈建能,赵雄,蒋淼,金绥强,胡连军.Kinematic Analysis of Elliptic-Gear & Eccentric Slider-Crank & Uniform-Pitch Screw Weft-Insertion Mechanism[J].Journal of Donghua University(English Edition),2010,27(6):852-857. 被引量：3
2潘毅,傅伟,王庭俊.纺织机械阅读臂零件感应淬火工艺的优化论证[J].铸造技术,2017,38(7):1597-1601. 被引量：1

二级引证文献4

1刘伯玉.基于航标船Z570型铸造柴油机中传动轴的失效分析[J].扬州工业职业技术学院论丛,2019,0(2):41-45.
2孙良,祝宇,武传宇,赵匀.非圆锥齿轮球面齿廓数值计算方法[J].农业工程学报,2013,29(8):27-35. 被引量：3
3杨晓冬,王燕铭,唐伟峰,屈彩虹.一种半自动压提环机新型送环机构设计[J].海军航空工程学院学报,2015,30(1):96-100. 被引量：1
4徐高欢.差速泵研究现状及综述（英文）[J].机床与液压,2017,45(12):94-99.

1王生泽,陈明,夏金国.KINETO-ELASTODYNAMICS OF A FLEXIBLE RAPIER LOOM[J].Journal of China Textile University(English Edition),1994,11(2):41-46.
2陈明,毕丽蕴.An Asymmetric Shedding Dobby[J].Journal of China Textile University(English Edition),1998,15(4):74-75.
3施雷飚,陈明.A STUDY ON THE DYNAMIC RESPONSE OF CAM BEAT-UP MOTIONS FOR RAPIER LOOMS[J].Journal of China Textile University(English Edition),1996,13(2):48-55.
4陈明,陈革.Review and Prospect of the Shuttleless Loom Development[J].Journal of China Textile University(English Edition),1999,16(1):56-58.
5蒋秀明.Analysis and Design of Conjugate Cam Shedding Mechanism with Dual Driving Shafts[J].Journal of China Textile University(English Edition),1998,15(1):57-60. 被引量：5
6Li,Kerang(李克让),Chen,Ming(陈明).An Analysis of the Orthogonal Crank-rocking Lever Spatial Mechanism for the Weft Insertion in Rapier Looms[J].Journal of Donghua University(English Edition),2001,18(1):27-31. 被引量：6
7刘朝伍,张宏斌.Formstar织网机的液压系统和剑杆系统常见故障及其解决办法[J].华东纸业,2014,45(4):53-54.
8钱永明,闫红霞,王永兴,陈革.Design of Electronic Weft-Insertion System for Three-Dimensional Loom[J].Journal of Donghua University(English Edition),2015,32(3):466-469.
9The Spring Festival drive department performance[J].纺织服装周刊,2014(6):32-32.
10竺志超,方志和.An Optimization Design of a Weft Insertion Mechanism for Rapier Looms[J].Journal of Donghua University(English Edition),2003,20(3):38-41. 被引量：5

Journal of China Textile University(English Edition)

1997年第4期

浏览历史

内容加载中请稍等...

CONJUGATE CAM WITH FIVE-BAR LINKAGE MECHANISM FOR RAPIER DRIVE OF FLEXIBLE RAPIER LOOMS 被引量：2

同被引文献13

引证文献2

二级引证文献4

相关作者

相关机构

相关主题

浏览历史