期刊文献+

大庆深层致密气藏高温压裂液的研制与应用 被引量:22

Development and application of fracturing fluids at high temperatures for Daqing deep compacted gas reservoirs
在线阅读 下载PDF
导出
摘要 针对深层致密气藏储层埋藏深、岩性复杂且微裂缝发育、压裂施工规模大的特点,研制了深层致密气藏压裂液体系(CHTG),改变了传统压裂液受热、剪切快速降解的特点,研究了该压裂液体系性能.室内评价及现场应用表明:CHTG压裂液在170℃高温环境中性能稳定,在150℃条件下,压裂液抗剪切可达到4.0 h,同时可根据需要控制压裂液的流变性,降低压裂液摩阻,并当排量为7 m3/min时,CHTG压裂液的摩阻是清水的16.7%;采用的降滤剂能显著降低双重介质下的压裂液滤失,压裂后表皮因数为-5.92,2口井压后无阻流量超过100×104m3/d,其增产效果显著. Deep compacted gas reservoirs are of deep embedding,complex lithology,well developed micro-fractures and need large scale fracturing.To the requirement of deep exploration,fracturing fluids for deep compact reservoirs were studied,which changed the performance of traditional fracturing fluids that degraded rapidly in the condition of high temperature and shearing.This article researched the performance of CHTG.The result of experimental test and application in the field indicated that CHTG kept stabilizing at 170 ℃,anti-shearing performance was 4.0 h at 150 ℃ and rheological property of fracturing fluids could be controlled,friction resistant could be reduced,the friction resistant of CHTG fracturing fluids was 16.7% of water when the rate of flow was 7 m^3/min;fluid loss additive using in fracture fluids could reduce leaking-off significantly,skin factor(S) after fracturing was-5.92,Two wells output 100×10~4 m^3/d after fracturing,Production increasing obviously.
出处 《大庆石油学院学报》 CAS 北大核心 2006年第1期34-38,共5页 Journal of Daqing Petroleum Institute
基金 黑龙江省科技攻关项目(黑2004-952)
关键词 深层致密气藏 压裂液 耐温耐剪切性能 破胶性 滤失性 压裂施工 deep compact gas reservoirs fracturing fluid temperature and shearing sustainability gel breaking property leaking-off property fracturing treatment
  • 相关文献

参考文献3

  • 1LAGRON C C.Chemical evolution of a high-tmperature facturing fuid[C].SPE 11794,1985:623-628.
  • 2WEIJERS L.The first successful fracture treatment campaign conducted in Japan:Stimulation challenges in a deep,Naturally fractured volcanic rock[C].SPE 77678,2002.
  • 3邢正岩,陶国秀,陈光梅,刘峰,杨晶霞.牛20断块天然裂缝分布对压裂裂缝特征的影响[J].大庆石油学院学报,2002,26(2):96-97. 被引量:4

二级参考文献1

  • 1王鸿勋.采油工艺原理[M].北京:石油工业出版社,1994.205-210.

共引文献3

同被引文献126

引证文献22

二级引证文献144

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部