1C Gosselin,J Angles.The Optimum Kinematic Design of a Planar Three-degree-of-freedom Parallel Manipulator[J].Journal of Mechanisms,Transmissions and Automation in Design,1988,110(1):35 ～41.
2J P Merlet,C Gosselin,N Mouly.WorkspacesofPlanarParallel Manipulators[J].Mechanism and Machine Theory,1998,33(1 ～2):7 ～20.
3C Gossenlin,Jiegao Wang.Singularity Loci of Planar Parallel Manipulators With Revolute Actuators[J].Robotics and Autonomous System,1997,21:377 ～ 398.
4Ping Ji,Hongtao Wu.An Efficient Approach to Forward Kinematics of a Planar Parallel Manipulator with Similar Platform[J].IEEE Transactions on Robotics and Automation,2002,18(4):647 ～ 649.
5G.Alici,Bijan Shirinzadeh.Optimum Synthesis of Planar Parallel Manipulators Based on Kinematic Isotropy and Force Balancing[J].Robotica,2004,22:97 ～ 108.
6J.P.Merlet.Parallel Robots:Open Problem[C].9th International Symposium of Robotics Research (ISRR'99),Snowbird,1999.
7J.P.Merlet.Redundant Parallel Manipulators[J].Laboratory Robotics and Automation,1996,8 (1):17 ～ 24.
9Flavio Firmani,Ron P Podhorodeski.Force-unconstrained Poses for a Redundantly-actuated Planar Parallel Manipulator[J].Mechanism and Machine Theory,2004,39 (5):459 ～ 476.
10Bhaskar Dasgupta,T S Mruthyunjaya.Force Redundancy in Parallel Manipulators:Theoretical and Practical Issuss[J].Mechanism and Machine Theory,1998,33 (6):727 ～ 742.
二级参考文献9
1[1]E. S. Conkur and R. Buckingham. Clarifying the Definition of Redundancy as Used in Robotics[J]. Robotica, 1997,15
2[2]J. P. Merlet. Redundant Parallel Manipulators[J]. Laboratory Robotics and Automation, 1996,(8):17～24
3[3]M. A. Nahon and J. Angeles. Force Optimization in Redundantly-actuated Closed Kinematic Chains[A]. IEEE Int Conf Rob Autom[C]. 1989, II (of3):951～956
4[4]S.Kock and W. Schumacher. A Mixed Elastic and Rigid-Body Dynamic Model of an Actuation Redundant Parallel Robot with High-Reduction Gears[A]. IEEE Int Conf Rob Autom[C]. 2000, II (of 4):1918～1923
5[5]G.F. Liu, Y.L Wu and X.Z. Wu. et al. Analysis and Con-trol of Redundant Parallel Manipulators[J]. ICRA 2001 (accepted)
6[6]F. C. Park and J. W. Kim. Singularity Analysis of Closed Kinematic Chains[J]. Journal of Mechanical Design, Transactions of the ASME.1999,121(1):32～38
7[1]HUNT K H.Kinematic Geometry of Mechanisms[M].Oxford:Claradon Press,1978.
8[2]GOSSELIN C M,MERLET J P.The Direct Kinematics of Planar Parallel Manipulators:Special Architectures and Number of Solutions[J].Mech Mach Theory,1994,29(8):1083-1097.
9[3]KUMAR V.Characterization of workspace of Parallel Manipulators[J].ASME J Mech Des,1992,114:368-375.
