摘要
冬瓜山铜矿是我国目前开采深度最大、具有岩爆危害的大型硬岩金属矿山。采用微震监测系统实现该矿岩爆的实时监测和预报,为此,进行微震监测系统站网布置优化研究。分析该矿采用多盘区多采场同时开采条件下的岩爆分布特点,确定微震监测系统的监测范围;针对监测范围、井下巷道工程和微震监测系统技术性能,设计多个微震监测系统传感器站网空间布置方案,对各方案计算事件震源定位误差和系统灵敏度;在综合分析计算结果、工程条件和经济性的基础上,确定满足该矿首采区微震监测要求的最佳监测系统配置方案;系统建立之后进行事件震源定位精度和灵敏度测定的爆破试验,证明该监测系统站网布置满足矿山监测要求,保证监测数据的可靠性和有效性。
Dongguashan Copper Mine is the deepest metal mine which has strong rockburst hazard in China. A microseismic monitoring system is established to monitor and predict rockbursts in real time in the mine. Therefore, the optimization of distribution of microseismic network is carried out. The characteristics of rockburst distribution caused by simultaneous excavation of multi-panel and multi-stope are analyzed to determine the monitoring area. Many schemes of distributions of microseismic networks are designed in terms of the monitoring area, the underground drifts and technical characteristics of the seismic monitoring system in the mine. The errors of source location and system sensitivities associated with these schemes are calculated. The optimum distribution of the microseismic network is gotten by synthetic analysis of the calculation results, engineering conditions and economical efficiency. After the system is established, some in-situ tests are made to measure the errors and sensitivities, and the results confirm that the optimum distribution meets the requirement of seismic monitoring in the mine, and the monitoring data are reliable and valid.
出处
《岩石力学与工程学报》
EI
CAS
CSCD
北大核心
2006年第10期2036-2042,共7页
Chinese Journal of Rock Mechanics and Engineering
基金
国家"十五"科技攻关项目(2004BA615A–04)
国家自然科学基金重大项目(50490274)
关键词
采矿工程
深井开采
岩爆
微震监测网
震源定位
灵敏度
优化
mining engineering
deep well mining
rockburst
microseismic monitoring network
seismic sourcelocation
sensitivity
optimization
