期刊文献+

碳黑/聚氨酯共混导电纤维熔融纺丝的研究 被引量:5

Research on carbon black/polyurethane blend melt spinning conductive fibers
在线阅读 下载PDF
导出
摘要 以聚氨酯为基体、碳黑为导电介质共混得到导电母粒,通过熔体纺丝法制得碳黑/聚氨酯共混导电纤维.研究表明:随着碳黑含量的增加,导电性增强,但纤维的力学性能、可纺性下降,当碳黑质量分数为16%时,其导电性和力学性能较好;分散剂的含量对纤维导电性也有一定的影响. Using polyurethane as matrix and carbon black as conductive medium, electric conductive master batch was prepared with the blend method, and the carbon black/polyurethane blend conductive fiber was prepared with melt spinning method. The results show that the conductivity of the fiber improves with increasing the content of the carbon black in the blend conductive fibres, but the mechanical property and spinnability of fibres descend. When the content of carbon black is 16%, the conductivity and property of mechanics of fiber are better. The content of dispersant also has some effect on conductivity of fibres.
出处 《天津工业大学学报》 CAS 2007年第1期5-7,共3页 Journal of Tiangong University
基金 天津市科委科技发展计划项目(06TXTJJC14400).
关键词 碳黑 聚氨酯 可纺性 导电性 力学性能 carbon black polyurethane spinnability conductivity mechanical property
  • 相关文献

参考文献5

二级参考文献33

  • 1Narkis M,Lidor G,Vaxman A,et al. Innovative ESD thermoplastic composites structured through melt flow processing[J]. IEEE Transactions on Electronics Packaging Manufacturing, 2000,23 (4): 239 - 245.
  • 2Rosner R B. Conductive materials for ESD applications:an overview[C]. Electrical Overstress/Electrostatic Discharge Symposium Proceedings, 2000, Sep 26- 28:121-131.
  • 3Narkis M, Ram A,Flashner F. Polyethylene/carbon black switching materials[J]. Journal of Applied Polymer Science, 1978,22:1163- 1165.
  • 4Abdel-Bary E M,Amin M,Hassan H H. Factors affecting electrical conductivity of carbon black-loaded rubber. Ⅱ.Effect of concentration and type of carbon black on electrical conductivity of SBR[J]. Journal of Polymer Science: Polymer Chemistry Edition, 1979,17: 2163 -2172.
  • 5Miyasaka K,Watanabe K,Jojima E,et al. Electrical conductivity of carbon-polymer composites as a function of carbon content[J]. Journal of Materials Science, 1982,77:1610-1616.
  • 6Narkis M,Lidor G,Vaxnan A,et al. New injection moldable electrostatic dissipative (ESD) composites based on very low carbon black loadings[J]. Journal of Electrostatics,1999,47:201-214.
  • 7Tchoudakov R,Breuer O,Narkis M. Conductive polymer blends with low carbon black loading:polypropylene/polyamide [J]. Polymer Engineering and Science, 1996,36 (10) :1336-1346.
  • 8Sumita M,Abe H,Kayaki H,et al. Effect of melt viscosity and surface tension of polymers on the percolation threshold of conductive-particle-filled polymeric composites [J]. J Macromol Sci -Phys, 1986,B25 (1 &2): 171 - 184.
  • 9Sumita M,Sakata K,Asai S,et al. Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black[J]. Polymer Bulletin, 1991,25: 265- 271.
  • 10Sumita M, Sakata K,Hayakawa Y,et al. Double percolation effect on the electrical conductivity of conductive particles filled polymer blends[J]. Colloid & Polymer Science, 1992,270:134- 139.

共引文献46

同被引文献85

引证文献5

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部