摘要
Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyldiphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay （K-10, montmorillonite）, plane H-Beta, plane MFI structured titanosilicate （TS-1） and heteropoly acids [HPA, namely dodecatungstophosphoric acid [H3PO4.12WOa-xH2O] （TPA）, dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3040P＋aq] （DMAA）, sodium tungstate hydrated purified [Na12WO4.2H2O] （STH）] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-1, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.
Selective formation of pharmaceutical intermediates like diphenylmethane, dimethyldiphenylmethane, benzyl toluene and benzoic acid by liquid phase, toluene benzylation with benzyl chloride as a benzylating agent, was systematically studied over plane clay （K-10, montmorillonite）, plane H-Beta, plane MFI structured titanosilicate （TS-1） and heteropoly acids [HPA, namely dodecatungstophosphoric acid [H3PO4.12WOa-xH2O] （TPA）, dodeca-molybdo phosphoric acid ammonium salt hydrate [H12Mo12N3040P＋aq] （DMAA）, sodium tungstate hydrated purified [Na12WO4.2H2O] （STH）] supported on clay, H-beta and TS-1. The 20%TPA/Clay, 30%TPA/H-Beta and 30%TPA/TS-1, were observed to be the best catalyst samples over plane clay, plane H-Beta and plane TS-1. The catalyst samples are compared with respect to benzyl chloride conversion and selectivities for diphenylmethane, dimethyl-diphenylmethane, benzyl toluene and benzoic acid. The reaction follows the pseudo-first order rate power law model. The apparent rate constants are calculated and compared with the reported ones.
