期刊文献+

车用发动机排气消声器的仿真与改进 被引量:2

Simulation of the muffler of engines and some improvements
在线阅读 下载PDF
导出
摘要 文章建立了排气消声器与发动机的耦合仿真模型,利用该模型对排气消声器的传声损失进行了计算,分析发动机的排气噪声。根据这种方法,对原消声器的设计进行了改进,仿真结果表明,改进后的消声器消声效果优于原消声器,对排气消声器的研制开发有一定的参考价值。 In order to reduce the noise of the engine's exhaust system,an improved muffler model is presented, and the transmission loss of both the former muffler and the modified muffler is calculated and compared. Then a coupled model of the engine and the muffler is established, and the noise of the engine's exhaust system is analyzed. Simulation results show that the performance of the modified muffler is superior to the former muffler. This study is valuable for the development of mufflers.
作者 刘胜 左承基
出处 《合肥工业大学学报(自然科学版)》 CAS CSCD 北大核心 2007年第10期1303-1305,共3页 Journal of Hefei University of Technology:Natural Science
关键词 仿真 传声损失 排气消声器 simulation transmission loss muffler
  • 相关文献

参考文献5

二级参考文献12

  • 1Wang C N. Numerical decoupling analysis of a resonator with absorbent material [J]. AppliedAcoustics, 1999,58:529-545.
  • 2Wu T W, Cheng C Y R, Zhang P. A direct mixedbody boundary element method for packed silencers [J]. Journal of the Acoustical Society of America,2002,111:2 566-2 572.
  • 3Kirby R, Cummings A. The impedance of perforated plates subjected to grazing gas flow and backed by porous media [J]. Journal of Sound and Vibration,1998,217:619-636.
  • 4Cofer G G, Bielert F, Kullman T. Durability, acoustic performance and process efficiencies of absorbent fibers for muffler filling [R], SAE paper 1999-01-1655, Michigan, USA, 1999.
  • 5Seybert A F, Seman R A, Lattuca M D. Boundary element prediction of sound propagation in ducts containing bulk absorbing materials[J]. Journal of Vibration and Acoustics, 1998,120: 976-981.
  • 6Ji Z L, Ma Q, Zhang Z H. Application of the boundary element method to predicting acoustic performance of expansion chamber mufflers with mean flow [J].Journal of Sound and Vibration, 1994,173: 57-71.
  • 7Ji Z L, Selamet A. Boundary element analysis of three-pass perforated duct mufflers[J]. Noise Control Engineering Journal, 2000,48:151-156.
  • 8Delany M E, Bazley E N. Acoustical properties of fibrous absorbent materials [J]. Applied Acoustics,1970,3: 105-116.
  • 9Utsuno H, Tanaka T. Transfer function method for measuring characteristic impedance and propagation constant of porous materials [J]. Journal of the A-coustical Society of America, 1989,86 : 637-643.
  • 10American Society for Testing and Materials 1993ASTM C 522-87 (Reapproved 1993), Philadelphia,PA. Standard test method for airflow resistance of acoustical materials[R].

共引文献159

同被引文献12

  • 1钟绍华,金国栋,张选国,章鸿.消声器优化设计及其性能分析方法的研究[J].内燃机工程,2005,26(1):55-58. 被引量:40
  • 2张永波,黄其柏,王勇,周明刚.基于GT-Power的并联内插管双室扩张式消声器插入损失研究[J].噪声与振动控制,2007,27(1):87-89. 被引量:12
  • 3WENDLAND D W, KREUCHER J E, ANDERSEN E. Reducing Catalytic Converter Pressure Loss with Enhanced Inlet header Diffilsion [C]. SAE Paper 952398, 1995.
  • 4叶年业.基于产品开发流程的发动机CAE技术研究及应用[D].上海:同济大学,2011.
  • 5张志华.内燃机排放与噪声控制[M]哈尔滨:哈尔滨工程大学出版社,1999.
  • 6洪宗辉;潘仲麟.环境噪声控制工程[M]北京:高等教育出版社,2002170-198.
  • 7黎志勤.汽车排气系统噪声与消声器设计[M]北京:中国环境科学出版社,1991.
  • 8张邦俊;翟国庆.环境噪声学[M]杭州:浙江大学出版社,200110-15.
  • 9周新祥.噪声控制技术及其新进展[M]北京:冶金工业出版社,2007.
  • 10Silvestri J. Study of intake system wave dynamics and acoustics by simulation and experiment SAE 940206[R].

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部