期刊文献+

SiO_2掺杂99BeO陶瓷的微观结构与性能 被引量:1

Microstructure and Properties of SiO_2-doped High Pure Beryllium Oxide Ceramics
在线阅读 下载PDF
导出
摘要 采用固相法制备99BeO陶瓷样品,系统研究了SiO2掺杂对99BeO高导热陶瓷微观结构及性能的影响。研究发现,随着SiO2含量的增加,99BeO陶瓷的抗折强度、密度、导热率以及电学性能均呈较明显的单峰分布。当SiO2掺杂量为0.8%(w)时,可获得性能优良、结构致密的高导热陶瓷,其抗折强度为248 MPa,密度为2.957 g/cm3,导热率为303 W/(m.K)。 Effects of SiO2- content on microstructure and properties of high pure beryllium oxide high thermal conductive ceramic prepared by solid state react method were investigated. The results revealed that with the increase of SiO2 content, flexural strength,density, thermal conductivity and electric properties increases first and then slightly decreases. The sample with 0.8% SiO2(mass faction)have excellent properties and denser microstructure,with the flexural strength of 248 MPa,density of 2. 957 g/cm^3 , the thermal conductivity of 303 W/(m·K).
出处 《材料开发与应用》 CAS 2007年第6期17-19,共3页 Development and Application of Materials
关键词 高导热 SiO2掺杂 99BeO陶瓷 High thermal conductivlty SiO2-doped Beryllium oxide
  • 相关文献

参考文献6

二级参考文献34

  • 1程阜民.混合微电子技术用关键材料的新进展[J].电子工艺简讯,1996(12):10-15. 被引量:1
  • 2高陇桥.非氧化物陶瓷与金属的接合技术[M].真空电子技术杂志社出版,1995,12.16.
  • 3高陇桥.BN陶瓷和金属封接技术[A]..陶瓷金属封接论文[C].北京硅酸盐学会内部出版,1999(7).277.
  • 4陈起韧(译).大功率天线开关器件用的介质材料——BN[J].电子管技术,1974,(4).
  • 5.[P].日本专利,平2—224402..
  • 6.[P].日本专利,平2—26872..
  • 7Slack G A. Brazed-Helix TWTS for High Power TWT. Microwave Journal, 1978(3):29.
  • 8Slack G A.J Phys Chem Solids 1973,34:321-335.
  • 9AD - 707946.
  • 10AD---853012.

共引文献60

同被引文献14

  • 1Michael K, Patrick B, Nelson R, et al. Aluminum nitride vs. BeO ceramics for high power resistor products [ J ]. Microwave Journal, 2001 ,44 ( 11 ) : 104 - 106.
  • 2Aitken E A. Initial sintering kinetics of BeO ceramics [J]. Journal of the American Ceramic Society, 1960,43:627 -633.
  • 3Duderstadt E C, White J F. Sintering BeO to variable density and grain sizes [ J]. American Ceramic Society Bulletin, 1965, 4,4( 11 ) : 907 -911.
  • 4Fehen E J. Sintering behavior of BeO ceramics [ J]. Journal of the American Ceramic Society, 1961, 44(6) : 251 -255.
  • 5文丹华.BeO陶瓷的烧结助剂及对热导率的影响研究[D].长沙:中南大学,2006.
  • 6徐光宪.稀土(上)[M].北京:冶金工业出版社,2002.
  • 7杨晓红,范志康,梁淑华,肖鹏.添加Y_2O_3对CuW触头材料性能的影响[J].材料研究学报,2007,21(4):414-420. 被引量:14
  • 8萨尔满H 舒尔兹H 黄照柏译.陶瓷学[M].北京:轻工业出版社,1989.123-125.
  • 9文丹华,王日初,朱学卫.烧结助剂和工艺对BeO陶瓷密度和热导率的影响[J].粉末冶金材料科学与工程,2007,12(5):296-300. 被引量:6
  • 10李志刚,钟朝位,张树人,王海蓉,田立宏,储齐晓.高纯高导热BeO陶瓷材料助烧剂的研究[J].压电与声光,2008,30(1):61-63. 被引量:3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部