期刊文献+

Application of dual reciprocity boundary element method for prediction of acoustic characteristics of ducts and silencers with three-dimensional potential flow

Application of dual reciprocity boundary element method for prediction of acoustic characteristics of ducts and silencers with three-dimensional potential flow
原文传递
导出
摘要 The Dual Reciprocity Boundary Element Method (DRBEM) is applied to predict the acoustic characteristics of ducts and silencers with three-dimensional potential flow, and the basic principle and numerical procedure of the proposed method are introduced. Compared to the Conventional Boundary Element Method (CBEM), the DRBEM takes into account the second order terms of flow Mach number in the acoustic governing equation, which is suitable for the situations with higher Mach number subsonic flow. The four-pole parameters of a duct and a varying cross-sectional area expansion chamber are predicted with the DRBEM, and the predictions are compared with the one-dimensional analytical solutions and the CBEM results. The comparisons demonstrated that the present method is valid. Transmission loss of silencers with different structures was also calculated with the DRBEM. The results showed that the influence of the three-dimensional flow on the acoustic characteristics of silencers with complex structures is not negligible. The Dual Reciprocity Boundary Element Method (DRBEM) is applied to predict the acoustic characteristics of ducts and silencers with three-dimensional potential flow, and the basic principle and numerical procedure of the proposed method are introduced. Compared to the Conventional Boundary Element Method (CBEM), the DRBEM takes into account the second order terms of flow Mach number in the acoustic governing equation, which is suitable for the situations with higher Mach number subsonic flow. The four-pole parameters of a duct and a varying cross-sectional area expansion chamber are predicted with the DRBEM, and the predictions are compared with the one-dimensional analytical solutions and the CBEM results. The comparisons demonstrated that the present method is valid. Transmission loss of silencers with different structures was also calculated with the DRBEM. The results showed that the influence of the three-dimensional flow on the acoustic characteristics of silencers with complex structures is not negligible.
出处 《Chinese Journal of Acoustics》 2008年第4期308-321,共14页 声学学报(英文版)
基金 the National Natural Science Foundation of China (10474016)
  • 相关文献

参考文献10

  • 1Partridge P W,Brebbia C A,Wrobel L C.The dual reciprocity boundary element method[]..1992
  • 2.Principle and numerical method of FEM[]..2003
  • 3.SYSNOISE Rev5.6,Help[]..
  • 4Munjal M L.Acoustics of ducts and mufflers[]..1987
  • 5Seybert A F,CHENG C Y R.Application of the bound- ary element method to acoustic cavity response and muffler analysis[].Journal of VibrationAcousticsStressand Re- liability in Design.1987
  • 6JI Z L,MA Q,ZHANG Z H.Application of the boundary element method to predicting acoustic performance of expansion chamber mufflers with mean flow[].Journal of Sound and Vibration.1994
  • 7Z. L. Ji,Q. Ma and Z. H. Zhang.A boundary element scheme for evaluation of four-pole parameters of ducts and mufflers with low mach number non-uniform flow[].Journal of Sound and Vibration.1995
  • 8Nardini D,Brebbia C A.A new approach to free vibration analysis using boundary elements[].Boundary Element Methods in EngineeringProceedings th International Conference on BEM.1982
  • 9Chen C S,Rashed Y F.Evolution of thin plate spline based particular solutions for Helmholtz-type equation for the DRM[].Mechanical and Research Communication.1998
  • 10Golberg M A,Chen C S,Ganesh M.Particular solutions of 3D Helmholtz-type equations using compactly supported radial basis functions[].Engineering Analysis with Bound- ary Elements.2000

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部