摘要
传统的闭环驱动电路其输出信号的频率与微机械陀螺驱动方向的固有频率存在一定偏差,且频率抖动较大,系统的建立时间较长.基于上述不足,在分析微机械陀螺闭环驱动方式工作原理的基础上,提出一种基于锁相技术的闭环驱动电路方案,电路进入稳定工作状态时,交流驱动电压与驱动方向敏感电流的相位及频率一致,微机械陀螺在驱动方向谐振,显著改善了输出信号的频率特性.仿真结果表明,这种闭环驱动电路输出信号频率与微机械陀螺驱动模态固有频率完全一致,频率抖动及系统建立时间分别是传统闭环驱动电路的38%和50%.通过实验验证了该方法的可行性.
The traditional closed-loop drive circuit had a deviation between the frequency of the output signal and the inherent frequency of the micromachined gyroscope along the driving direction, and the frequency jitter was not very small. Moreover, this circuit had a long settling time. In order to find a solution, by investigating the principle of the closed-loop drive method for the micromachined gyroscope, a closed-loop drive circuit based on the phase-locked technology was presented. Under stable condition, the drive signal of this circuit had the same frequency and phase as the sensitive electric current, and the gyroscope resonated along the driving direction. This proposed circuit improved the frequency character of the output signal. The simulation results show that there is no deviation between the frequency of the output signal and the gyroscope＇s inherent frequency when using this circuit, the frequency jitter and settling time of this circuit are 38% and 50% of the traditional circuit, respectively. The experimental results demonstrate the feasibility of the method.
出处
《纳米技术与精密工程》
EI
CAS
CSCD
2008年第6期458-463,共6页
Nanotechnology and Precision Engineering
关键词
锁相技术
闭环驱动电路
微机械陀螺
频率特性
phase-locked technology
closed-loop drive circuit
micromachined gyroscope
frequency character
