期刊文献+

Cu-Cr-Zr合金连续加热时效动力学研究

Study on aging kinetics of copper alloy during continuous heating
在线阅读 下载PDF
导出
摘要 本文通过测试铜合金在连续加热过程中电阻率的变化研究了铜合金的连续加热时效动力学。提出了用时效过程中电阻率的减小值Δρ作为描述时效过程的参数。在此基础上,建立了连续加热时效动力学图。在等速加热时效过程中,利用电阻率与温度呈线性关系这一特点,提出了一种计算Δρ的方法。测出了Cu-Cr-Zr合金以0.075~1.6℃/min加热速率进行加热时的Δρ与温度的关系。 The variation of resistivity was tested for an copper alloy (Cu-Cr-Zr) during continuous heating to study the relevant aging kinetics. It was suggested that the decrement of the resistivity in aging process, △p, is taken as a parameter to describe the aging process. Then, based on experimental data, a diagram of aging kinetics during continuous heating is given. Taking advantage of the linear relationship between resistivity and temperature in the aging process at constant heating rate, a method is proposed to calculate △p, and the relationship between △p and temperature of the copper alloy is obtained when the heating rate is 0.075-1.6℃/min.
出处 《真空》 CAS 北大核心 2009年第2期7-10,共4页 Vacuum
基金 河南省杰出人才基金项目(0521001200) 河南省教育厅自然科学基金项目(2006430004) 河南科技大学科研基金资助项目(2006ZY046)
关键词 铜合金 时效 动力学 电阻率 copper alloy aging, kinetics resistivity
  • 相关文献

参考文献10

  • 1雷静果,刘平,赵冬梅,康布熙,田保红.用导电率研究Cu-Ni-Si-Cr合金时效早期相变动力学[J].材料热处理学报,2003,24(4):22-26. 被引量:56
  • 2刘平,赵冬梅,田保红.高性能铜合金及其加工技术[M].北京:冶金工业出版社,2004.16
  • 3刘平,康布熙,黄金亮,等.快速凝固Cu-Cr-Zr-Mg合金的时效析出与再结晶.1-3.
  • 4Wilm A.[J]Metallurgio, 1911,8(10) : 223-229.
  • 5Merica P D. [C].Waltenbery,R.G,reeman,J.R,Tran.Am. Inst. Mining. Met. Engrs . 1920,64 : 3-10
  • 6Merica P D. Wahenbery, R. G. andScott, H., Am. Inst. mining Met.Eugrs.,64(1920),41
  • 7陈小芳,许彪,张萌.稀土元素对铜合金显微组织的影响.1-3.
  • 8赵美,王自东,林国标,等.高强高导Cu-Cr-Zr合金的研究进展.1-3.
  • 9Bain E C. Trans Amer, Soc,Steel Treating, 1932,20.
  • 10宋学孟.金属物理性能分析[M].机械工业出版社,1998,8(1):20-34.

二级参考文献11

  • 1赵冬梅,董企铭,刘平,金志浩,康布熙.高强高导铜合金合金化机理[J].中国有色金属学报,2001,11(z2):21-24. 被引量:124
  • 2曹育文 马营生 唐祥云 等.中国铜合金引线框架材料的现状与发展[J].功能材料,1998,10:714-718.
  • 3二塚錬成 等.Development of copper alloy for leadfream[J].伸铜技术研究会志,1997,36(1):25-32.
  • 4Lockyer S A, Noble F W. Precipitate stmcture in a Cu-Ni-Si alloy[J]. Journal of Materials Science, 1994,29(1) :218 ~ 226.
  • 5Grylls R J, Tuck C D S, Loretto M H. Identlification of orthorhombic phase in a high-strength cupronickel[J]. Scripta Materialia, 1996,43( 1 ): 121 ~ 126.
  • 6宋学孟.金属物理性能[M].第Ⅰ版.北京:机械工业出版社,1981,23~24.
  • 7石德柯.材料科学基础[M].第Ⅰ版.北京:机械工业出版社,2000,192.
  • 8刘平,曹兴国,康布熙,黄金亮,顾海澄.快速凝固Cu-Cr合金导电性分析[J].洛阳工学院学报,1998,19(4):1-5. 被引量:25
  • 9刘平,康布熙,曹兴国,黄金亮,殷标,顾海澄.快速凝固Cu-Cr-Zr-Mg合金的时效析出与再结晶[J].中国有色金属学报,1999,9(2):241-246. 被引量:108
  • 10赵冬梅,董企铭,刘平,康布熙,金志浩.超高强度Cu-Ni-Si合金时效过程研究[J].材料热处理学报,2002,23(2):20-23. 被引量:43

共引文献73

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部