期刊文献+

直流电弧加热炉谐波的小波降噪仿真分析 被引量:2

Wavelet De-noise Simulation on DC Arc Heating Furnace
在线阅读 下载PDF
导出
摘要 90 MW直流电弧的电流控制采用2台整流变压器控制,通过调节晶闸管桥触发角构成24脉波整流电路.24脉波整流电路产生谐波以11,13,23和25次谐波为主,这些高频谐波对电弧加热炉的电流调节的有效性造成了很大的危害.采用多种小波阈值对90 MW直流电弧加热炉电系统谐波信号进行降噪,并从中选择了最优的降噪阈值,达到对信号的优化处理.仿真结果表明,该直流电弧系统谐波信号小波降噪的最优阈值为sqrt(2log(length(X)))阈值,降噪后可使信号中的谐波成分明显降低,保证了直流电弧系统的可靠运行. 90 MW DC arc furnace uses the current 2- transformer rectifier bridge thyristor controlled by adjusting the angle trigger to compose 24 pulse wave rectifier circuit. The 24 pulse wave rectifier circuit generates harmonics mainly about 11, 13, 23 and 25 times harmonic, these high- frequency harmonics do great harm to arc furnace on the effectiveness of the current regulation. A variety of wavelet is employed in thresholding 90 MW DC arc furnace power system harmonic signal noise, and the optimal choice from the noise threshold optimize the signal processing correspondingly. The simulation results show that 90 MW DC arc furnace system harmonic signal wavelet denoises the optimal threshold for sqrt (2log (length (X))) threshold, and the harmonic components reduce obviously, as a result, the operation of the 90 MW DC arc furnace is ensured.
出处 《同济大学学报(自然科学版)》 EI CAS CSCD 北大核心 2009年第5期669-673,共5页 Journal of Tongji University:Natural Science
关键词 直流电弧加热炉 24脉波整流 谐波 小波降噪 DC arc furnace system 24 pulse wave rectifier harmonics wavelet denoising
  • 相关文献

参考文献4

  • 1Aerotherm Corporation.Scirocco project phase C1,user requirements test conditions analysis[R].Capua:CIRA,1993.
  • 2Ambrosino G,Borrelli S,Celentano G,et al.The scirocco PWT control system for dynamic tests[R].Capua:CIRA,1995.
  • 3Ansaldo Industries.Scirocco project phase C1,system specification general requirements[R].Capua:CIRA,1993.
  • 4李建民,尹传贵.城市轨道交通牵引供电系统谐波分析[J].城市轨道交通研究,2004,7(6):46-49. 被引量:27

二级参考文献4

  • 1Vince Scaini, Bruce M. Urban High Current DC Choppers and Their Operational Benefits. IEEE, 1998(19)
  • 2郑瞳炽.城市轨道交通牵引供电系统[M].北京:中国铁道出版社,2003..
  • 3黄俊 王兆安.电力电子技术[M].北京:机械工业出版社,2002..
  • 4陶生桂,刘成永,胡兵.直流开关电源纹波分析[J].城市轨道交通研究,2003,6(4):44-47. 被引量:10

共引文献26

同被引文献16

  • 1朱政苇.现代步进梁式板坯加热炉的新进展[J].工业炉,1994,16(3):52-55. 被引量:2
  • 2蒋安家.冶金工厂轧钢加热炉的设计(下)[J].冶金能源,1995,14(3):21-23. 被引量:2
  • 3徐平光,友田阳.原位中子衍射材料表征技术的进展[J].金属学报,2006,42(7):681-688. 被引量:16
  • 4张伟勇 黄德先 王毓栋 等.延迟焦化加热炉的自适应状态的反馈预测控制和专家控制.Chinese Journal of Chemical Engineering(中国化学工程学报:英文版),2008,16(4).
  • 5GB/T4338-1995.金属材料高温拉伸试验[S].[S].,..
  • 6Oksuka K, Wayman C M. Shape memory materials[M]. Cambridge: Cambridge University Press, 1999131-48.
  • 7Kazuhiro O, Tomoyuki K. Science and technology of shape-memory alloys: New developments[J]. MRS Bulletin, 2002, 27(2)..91-100.
  • 8Otsuka K, Ren X, Physical metallurgy of Ti-Ni-based shape memory alloys[J], Progress in Materials Science, 2005, 50(5),.511-678.
  • 9Van den Hof P. Identification of experimental models for control design[C]//IEEE Instrumentation and Measurement Technology Confer- ence. 2001 :1155-1162.
  • 10柴天佑,王中杰,王伟.加热炉控制技术的回顾与展望[J].冶金自动化,1998,22(5):1-4. 被引量:28

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部