期刊文献+

超超临界转子钢X12CrMoWVNbN10-1-1的等温转变动力学 被引量:10

Isothermal transformation kinetics of X12CrMoWVNbN10-1-1 steel for the ultra-supercritical rotor
在线阅读 下载PDF
导出
摘要 通过膨胀试验测定了X12CrMoWVNbN10-1-1铁素体耐热钢连续加热过程相变动力学曲线(CHT),根据等温转变动力学与连续转变动力学之间的关系将CHT曲线转换为等温加热相变动力学曲线(IHT);采用定量金相法测定X12CrMoWVNbN10-1-1铁素体耐热钢以30℃/h加热至1070℃保温12h的过冷奥氏体经过不同温度等温转变的转变量与等温时间的关系,根据试验结果求解出修正的Avrami方程中的系数,并绘制出这种奥氏体化条件下的过冷奥氏体等温转变动力学曲线(TTT)。 The isothermal transformation kinetics curves of X12CrMoWVNbN10-1-1 ferritic heat-resistant steel were investigated.The continuous heating transformation curve(CHT) tested by dilatometric experiment is converted to isothermal heating phase transformation curve(IHT) based on the relationship between isothermal transformation kinetics and continuous transformation kinetics.The transformed volume fraction of ferrite to austenite in the steel after austenization at 1070 ℃ for 12 h is measured as a function of isothermal time at different isothermal temperatures by quantitative metallographic method.The coefficients of modified Avrami equation are obtained and TTT curve of the steel is developed based on the experiments.
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2010年第1期35-39,共5页 Transactions of Materials and Heat Treatment
基金 上海市科学技术委员会重大科技攻关项目(08DZ1100302)
关键词 超超临界转子钢 等温相变动力学曲线 Avrami方程 USC rotor steel isothermal transformation kinetics curves Avrami equation
  • 相关文献

参考文献11

  • 1Jacqueline Lecomte-Beckers, Florian Schubert, Philp J Ennis. Materials for advanced power engineering 1998,Part I: Proceedings of the 6^th L iege conference [C].Julich Germany : Forschungszentrum Julich, 1998 : 401.
  • 2Maruyam Kouichi, Sawada Kota, Koike Jun-ichi. Strengthening mechanisms of creep resistant tempered martensltic steel[ J ]. ISIJ International, 2001, 41(6) :641 -653.
  • 3Fernandes F M B, Denis S, Simon A. Mathematical model coupling phased transformation and temperature evolution during quenching of steels[J]. Materials Science and Technology, 1985, 1 (10) : 838 -844.
  • 4Denis S, Farias D, Simon A. Mathematical model coupling phase transformations and temperature evolutions in steels[ J]. ISIJ International, 1992, 32 (3): 316-325.
  • 5Farjas J, Roura P. Modification of the kolmogorov-johnson-mehl-avrami rate equation for non-isothermal experiments and its analytical solution[ J]. Acta Materialia, 2006, 54(20): 5573-5579.
  • 6Tszeng T C, Shi G. A global optimization technique to identify overall transformation kinetics using dilatometry data-applications to austenitization of steels[J]. Materials Science and Engineering A, 2004, 380( 1 ) : 123 - 136.
  • 7Ruitenberg G, Woldt E, Petford-long A K. Comparing the johnson-mehl-kolmogorov equations for isothermal and linear heating conditions [ J]. Thermo Chimica Acta, 2001, 378(1 -2): 97- 105.
  • 8Rios P R. Relationship between non-isothermal transformation curves and isothermal and non-isothermal kinetics [ J ]. Acta Materialia, 2005, 53 (18) : 4893 -4901.
  • 9Hawbolt E B, Chau B, Brimacombe J K. Kinetics of austenite-ferrite and austenite-pearlite transformation in a 1025 carbon steel[ J]. Metallurgical Transactions A, 1985, 16(4) : 565 -577.
  • 10Tsai M C, Chiou C S, Du J S, et al. Phase transformation in AIS1410 stainless steel[ J]. Materials Science and Engineering A, 2002, 332 : 1 - 10.

同被引文献76

引证文献10

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部