摘要
目前国内外有关墙体防爆的研究多是针对恐怖袭击,且建模分析中多采用单向墙体,而对于民宅内燃气爆炸防护的研究很少。本文详细讨论了数值模拟的建模关键技术,在此基础上建立了墙体三维模型,采用具有民宅燃气爆炸特征的荷载曲线,对四边约束墙体的破坏模式、抗爆能力等进行了初步分析,并与单向墙体进行了比较。结果表明,墙体边界约束条件、厚度、砂浆强度、平面尺寸等因素均会对计算结果产生一定影响,其中前两者的影响效果较为显著。以此为基础提出的一些民宅防爆建议,可为结构防爆设计提供参考。
At present,many anti-explosion researches for the masonry wall were focused on terror attack,the oneway wall was often used in the FE model,but less research has been done on the gas explosions happened in the civil house.On the basis of detailed discussion to the modeling key technologies,a three-dimensional model was established.The failure mode and anti-blast ability of the four sides constrained wall under the gas explosion load were analyzed,and the results were compared with the oneway wall.The study shows that the boundary condition,mortar strength,wall thickness and plane dimension were all have influence on the results,in which the two former have the most significant impact.Combined with practical factors,some preventive measures were put forward at the end of this paper.
出处
《防灾减灾工程学报》
CSCD
2010年第3期298-302,共5页
Journal of Disaster Prevention and Mitigation Engineering
关键词
燃气爆炸
四边约束墙体
抗爆能力
破坏模式
数值模拟
gas explosion
four sides constrained wall
anti-blast ability
failure mode
numerical simulation
