期刊文献+

原位反应制备TiB_2颗粒增强Al-Si基复合材料的研究 被引量:4

Research on In-situ TiB_2 Particles Reinforced Al-Si Matrix Composite
在线阅读 下载PDF
导出
摘要 采用Al-TiO2-KBF4-Na3AlF6为反应体系,通过热力学分析,用熔体直接反应法制备了TiB2/Al-18%Si复合材料,运用XRD、OM、EPMA、SEM和硬度仪等对该复合材料的物相、颗粒分布、显微组织及硬度进行了分析。结果表明:该复合材料主要由Al、Si和TiB2相组成;原位内生的TiB2颗粒细小(<1.0μm),并均匀弥散分布于Al-18%Si基体中;与基体合金相比,复合材料的硬度明显提高。 Based on the thermodynamic analysis of Al-TiO2-KBF4-Na3AlF6 reaction system,TiB2/Al-18%Si composite was prepared by directional melt reaction in-situ synthesis process.The phase composition,microstructure,the distribution of TiB2 particles on the matrix and hardness of the composite were investigated by XRD,OM,EPMA,SEM and sclerometer,respectively.The results indicate that there are Al,Si and TiB2 phase in the composite.The in-situ TiB2 particle is less than 1.0 μm,and uniformly distribute in Al-18%Si matrix alloy.Compared with matrix alloy,the hardness of the composite dramatically improves.
出处 《热加工工艺》 CSCD 北大核心 2011年第4期63-66,共4页 Hot Working Technology
基金 兰州市科技攻关项目(2008-1-23)
关键词 原位反应 TIB2颗粒 Al-Si基复合材料 微观组织 in-situ reaction TiB2 particle Al-Si matrix composite microstructure
  • 相关文献

参考文献16

  • 1Ibrahim I A, Mohamed F A, Lavemia E J. Particulate reinforced metal matrix composites [J]. Mater. Sci., 1991,26(1): 1137-1156.
  • 2Parka B G, Crosky A G, Hellier A K. Fracture toughness of microsphere Al2O3-A1 particulate metal matrix composites [J]. Composites :Part B, 2008,39 : 1270-1275.
  • 3Chen S H, Wang T C. Size effects in the particle-reinforced metal-matrix composites[J]. Acta. Mech. ,2001,157 : 113-115.
  • 4吴人洁.金属基复合材料的发展现状与应用前景[J].航空制造技术,2001,44(3):19-21. 被引量:26
  • 5Lakshmi S, Lu L, Gupta. In situ preparation of TiB2 reinforced A1 based composites [J]. Journal of Material Processing Technology, 1998,73 : 160-166.
  • 6Tee K L, Lu L, Lai M O. In-situ processing of AI-TiB2 composites by the stir-casting technique [J]. Journal of Materials Processing Technology, 1999,89-90: 513-519.
  • 7Ronald G. Material properties of titanium diboride [J]. J. Res. Natl. Inst. Stand Techn., 2000,105(5) : 709-720.
  • 8赵敏,姜龙涛,武高辉.TiB2/Al复合材料制备工艺的研究进展[J].材料导报,2008,22(5):78-82. 被引量:8
  • 9孟保平,张英,关武红.高硅铝合金A390铸棒的生产工艺研究[J].有色金属加工,2004,33(3):5-7. 被引量:3
  • 10梁英教 车荫昌.无机物热力学数据手册[M].沈阳:东北大学出版社,1996..

二级参考文献144

共引文献91

同被引文献41

  • 1陈登斌,霍晓阳,张松利,赵玉涛.(Al_2O_3+Al_3Zr)_p/Al-22Si铝基复合材料的制备及摩擦学性能[J].机械工程材料,2008,32(12):47-50. 被引量:3
  • 2闫卫平,荣福杰,宋国金,翟虎,马志毅,冯志军.混合盐法制备TiB_2/Al复合材料的研究现状[J].铸造,2006,55(11):1114-1117. 被引量:18
  • 3霍晓阳,赵玉涛,陈刚,孙洪强,许可,丁加善.高硅铝合金及其原位复合材料干滑动磨损性能与机制[J].铸造,2007,56(4):375-379. 被引量:2
  • 4Ibrahim I A, Mohamed F A, Lavernia E J. Particulate reinforced metal matrix composites [J]. Mater Sci, 1991,26 ( 1 ):1137-1156.
  • 5Tee K L,Lu L,Lai M O. In-situ processing of AI-TiBz composites by the stir-casting technique[J]. Journal of Materials Processing Technology, 1999,89-90 : 513-519.
  • 6Lakshmi S, Lu L, Gupta M. In-situ preparation of TiB2 reinforced A1 based composites[J]. Journal of Material Processing Technology, 1998,73 : 160-166.
  • 7Prasada Rao A K,Karabi Das,Murty B S, et al. Effect of grain refinement on wear properties of A1 and A1-7Si alloy[J]. Wear, 2004, 257. 148- 153.
  • 8Thakur S K,Dhindaw B K. The Influence of interracial characteristics between SiCp and Mg/A1 metal matrix on wear coefficient of friction and microhardness [J]. Wear, 2001, 247 : 191-201.
  • 9Sivaprasada K, Kumaresh Babua S, Natarajana S, et al. Study on Abrasive and Erosive Wear Behaviour of A1 6063/TiB2 In Si- tu Composites[J]. Mater. Sci. Eng. A, 2008(9): 1-6.
  • 10Friendrich H, Schumann S. Research for a "new age of magnesium" in the Automotive Industry[J]. Materials Processing Technology, 2001, 117:276-281.

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部