摘要
用普通谷物膨化机进行大豆挤压膨化处理的最佳工艺条件是:原料水分为12.8%;原料粒度为8目筛上物;螺杆转速为384r/min.在此条件下所获膨化料浸出后粕中残油率低于0.5%,膨化料在浸出速率、溶剂渗滤速度、湿粕含溶量诸方面均明显优于轧制胚.
The best process conditions for the soybean extrusion in a commongrain extruder are: The water content of raw materials is 12.8%, the grai-niness of raw materials is oversize on 8 holes/inch seive and the rotative velocity of extruder is 384r/min.The residual oil rate of dry meal which is stemmed from extracted extrudant under the previous conditions is less than 0.5%. The extrudant has an obvious advantage over flakes in the ways of extraction rate,solvents permeating rate and solvent content of wet meat,etc.
关键词
大豆膨化
浸出工艺
残油率
大豆油
extrusion of soybean extraction process residual oil rate
