期刊文献+

等离子喷涂HA/TiO_2复合涂层 被引量:14

Plasma Sprayed HA/TiO_2 Composite Coatings
在线阅读 下载PDF
导出
摘要 采用大气等离子喷涂方法,成功地制备了HA/TiO2复合涂层,对复合涂层的结合强度、微观结构、水浸渍下的表面形貌进行了较为深入的研究.结果表明,由于TiO2的加入,HA/TiO2涂层的结合强度明显高于纯HA徐层,而且导致涂层破坏机理由粘合破坏向内聚破坏转化.这是由于HA/TiO2的复合缓和了涂层与基体间的膨胀系数失配现象,改善了涂层与基体之间的结合.SEM观察显示,HA/TiO2涂层表面有一些细小的裂纹,但在去离子水中浸泡后就会消失,而且不容易产生新的裂纹,这说明TiO2的加入不但改善了涂层与基体之间的结合,同时增强了涂层内部颗粒的结合. HA/TiO2 composite coatings were fabricated successfully via atmospheric plasma spraying, whose bonding strength, microstructure and surface mophology after immersion in deionized water were investigated. The obtained results reveal that the bonding strengthes of HA/TiO2composite coatings are much higher than that of HA coating and the fracture mechanism of the coating changes from adhesive failure to cohesive failure owing to the addition of TiO2 in the coating. The reason for this is the addition of TiO2 in the coating reduces the mismatch of thermal expansion coefficient between the coating and the substrate. SEM obeservation shows that there are some micro cracks in the composite coatings which disappear after immersion in deionized water for a day, and almost no new cracks generate again. This means that both the adhesive strength and the cohesive strength are improved by the addition of TiO2 in the coating.
出处 《无机材料学报》 SCIE EI CAS CSCD 北大核心 1999年第6期956-962,共7页 Journal of Inorganic Materials
关键词 HA涂层 强度 等离子喷涂 喷涂 二氧化钛 涂层 HA coating, TiO_2, bonding strength, plasma spraying
  • 相关文献

参考文献4

  • 1李剑峰.-[J].中国科学院上海硅酸盐研究所硕士论文,1996,25.
  • 2Wang Y,Therm Spray Technol,1998年,7卷,1期,50页
  • 3李剑峰,硕士学位论文,1996年,25页
  • 4奚同庚,无机材料热物性学,1981年,256页

同被引文献142

引证文献14

二级引证文献54

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部