期刊文献+

焙烧温度对Ni/γ-Al_2O_3催化剂性能的影响 被引量:11

EFFECT OF CALCINATION TEMPERATURE ON PERFORNANCES OF Ni/γ-Al_2O_3
在线阅读 下载PDF
导出
摘要 利用程序升温还原(TPR)、X射线衍射仪和固定床微反装置等对不同温度下焙烧的Ni/γAl2O3催化剂的性能进行了实验研究。结果表明,焙烧温度对催化剂活性组分镍晶粒的粒度、镍的还原性能以及催化剂的活性和稳定性有很大影响。当焙烧温度的范围为700—900℃时,催化剂具有良好的活性和水热稳定性。在600℃下焙烧的催化剂极易被还原,催化剂初活性较好,但水热稳定性很差。在1000℃下焙烧的催化剂很难被还原,催化剂初活性最好,但水热稳定性不太好。 The effect of calcination temperature on performances of Ni /γ-Al2O3 catalyst were investigated experimentally by using temprature profile recorder ,X-ray diffraction and fixed-bed reactor The calcination temperature has great influence on the size of Ni crystallite the catalytic activity ,stability and hydrothermostability of Ni /γ Al2O3catalyst The activity and hydrothermostability of Ni/γ-Al2O3catalyst being calcined at 700~900 are good When the calcinating temperature is 600 or 1000,the initial activity of the catalyst is high but the hydrothermostability is low
出处 《石油大学学报(自然科学版)》 CSCD 1999年第6期67-69,共3页 Journal of the University of Petroleum,China(Edition of Natural Science)
基金 中国石油化工集团公司资助!297028
关键词 催化剂 焙烧温度 水热稳定性 活性 氧化铝 catalyst calcination temperature Ni /γ-Al2O3 hydrothermostability activity
  • 相关文献

参考文献5

二级参考文献20

  • 1曹立新,陈燕馨,李文钊.Ni系列催化剂上甲烷直接氧化制合成气[J].分子催化,1994,8(5):375-382. 被引量:25
  • 2谢有畅,中国科学.B,1993年,23卷,113页
  • 3蔡小海,第六届全国催化学术报告会论文摘要集,1992年
  • 4Zhang Lifeng,J Solid State Chem,1992年,97卷,292页
  • 5王智民,催化学报,1992年,13卷,65页
  • 6Chen Yi,5th Tri.Lateral Symposium on Catalysis,1991年
  • 7谢有畅,Adv Catal,1990年,37卷,1页
  • 8刘英骏,物理化学学报,1986年,2卷,470页
  • 9V. R. Choudhary,A. M. Rajput,B. Prabhakar. Energy efficient methane-to-syngas conversion with low H2/CO ratio by simultaneous catalytic reactions of methane with carbon dioxide and oxygen[J] 1995,Catalysis Letters(3-4):391~396
  • 10A. G. Dietz,L. D. Schmidt. Effect of pressure on three catalytic partial oxidation reactions at millisecond contact times[J] 1995,Catalysis Letters(1-2):15~29

共引文献55

同被引文献107

引证文献11

二级引证文献78

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部