浮拖法铺设海底管道接头处破坏机理研究被引量：1

Study on Failure Mechanism for Welded Joints of Pipeline Laying by Surface Tow Method

在线阅读下载PDF

导出

摘要基于浮拖法铺设海底管道接头处全寿命期受力条件,开展有限元数值仿真模拟。给出了存在焊接错边缺陷情况下管道接头处典型的局部屈曲变形模式,分析了循环加载对临界屈曲荷载的影响,并对多种因素进行了参数分析。 Based on finite element method, a numerical procedure to simulate the whole life cycle loading history for welded joints of submarine pipeline laying by surface tow method is proposed. The typical local buckling modes of the pipeline joint with weld imperfections are calculated and studied. The effects of cyclic loading on the critical buckling load are analyzed. A parametric study is performed at last.

作者成红武李昕周晶

机构地区大连理工大学

出处《中国海洋平台》 2011年第5期38-43,共6页 China offshore Platform

基金中央高校基本科研业务费专项(DUT10ZD201)资助项目

关键词海底管道焊接缺陷局部屈曲循环荷载参数分析 submarine pipeline weld imperfections local buckling cyclic loading parameter analysis

分类号 P756.2 [天文地球—海洋科学]

引文网络
相关文献

参考文献8

1Song X J. Numerical solution for pipeline wrinkling [D]. Canada, University of Alberta, 2003.
2David W M. Local buckling, strain localization, wrinkling and postbuckling response of line pipe[J]. Engineering Struc- ture, 1997, 19(5)..361-371.
3Einsfeld R A, David W M, Ghodsi N Y, Buckling analysis of high-temperature pressurized pipelines with soil-structure interaction [J]. J. Braz. Soc. Mech. Sci. Eng. 25 (2003):164-169.
4Alfred B D, David W M, Roger C J J. Initial imperfection models for segments of line pipe[J]. Journal of Offshore Me- chanics and Arctic Engineering, 2006(11):128-323.
5Sreekanta D. Fracture of wrinkled energy pipelines[D]. Canada, University of Alberta, 2003.
6Ramberg W, Osgood W R. Description of stress-strain curves by Three Parameters[C]. NACA Technical Note, 1943.
7Alfred B D, David W M, Roger C J J. Critical Buckling strain Equations for Energy Pipelines-A Parametric Study[J]. Journal of Offshore Mechanics and Arctic Engineering, 2006(8):128-249.
8Dorey A B, Roger C J J, and David W M. Critical Buckling Strains for Energy Pipelines[J]. Structural Engineering Re- port NO. 237, Department of Civil Engineering, University of Alberta, Edmonton, Canada.