浅议负荷测算在变频改造中的应用
出处
《上海纺织科技》
北大核心
2000年第2期58-58,共1页
Shanghai Textile Science & Technology
二级参考文献4
-
1Peng Li Xingying Lan Chunming Xu Gang Wang Chunxi Lu Jinsen Gao.Drag models for simulating gas–solid flow in the turbulent fluidization of FCC particles[J].Particuology,2009,7(4):269-277. 被引量：13
-
2Ernst-Ulrich Hartge,Lars Ratschow,Reiner Wischnewski,Joachim Werther.CFD-simulation of a circulating fluidized bed riser[J].Particuology,2009,7(4):283-296. 被引量：41
-
3Junwu Wang.Flow structures inside a large-scale turbulent fluidized bed of FCC particles:Eulerian simulation with an EMMS-based sub-grid scale model[J].Particuology,2010,8(2):176-185. 被引量：7
-
4Chanchal Loha,Himadri Chattopadhyay,Pradip K.Chatterjee.Euler-Euler CFD modeling of fluidized bed:Influence of specularity coefficient on hydrodynamic behavior[J].Particuology,2013,11(6):673-680. 被引量：8
共引文献12
-
1Chanchal Loha,Himadri Chattopadhyay,Pradip K.Chatterjee.Effect of coefficient of restitution in Euler-Euler CFD simulation of fluidized-bed hydrodynamics[J].Particuology,2014,12(4):170-177. 被引量：8
-
2Tianyu Wang,Yurong He,Shengnan Yan,Dong Rip Kim.Rotation characteristic and granular temperature analysis in a bubbling fluidized bed of binary particles[J].Particuology,2015,13(1):76-88. 被引量：4
-
3Bijoy Das,Amitava Datta.Modeling of hydrodynamics in a bubbling fluidized-bed gasifier and evaluation of the inter-phase gas exchange rate under different operating conditions[J].Particuology,2016,14(2):151-158. 被引量：1
-
4陆永光,吴努,王冰,于昭洋,林德志,胡志超.花生荚果碰撞模型中恢复系数的测定及分析[J].中国农业大学学报,2016,21(8):111-118. 被引量：31
-
5陈涛,刘玉涛,花拥斌,宁翔,徐佳杰,廖达海.基于CFD的建筑陶瓷干法制粉造粒室倾斜率的分析[J].陶瓷学报,2016,37(6):724-728. 被引量：4
-
6Carlos M. Romero Luna,Luis R. Carrocci,Gretta L.A.F. Arce,Ivonete Avila.A comparative assessment of empirical and lattice Boltzmann method-based drag models for simulation of gas-solid flow hydrodynamics in a bubbling fluidized bed[J].Particuology,2017,15(4):129-137. 被引量：1
-
7Stephan Gerber,Michael Oevermann.A two dimensional Euler-Lagrangian model of wood gasification in a charcoal bed-Part II： Parameter influence and comparison[J].Particuology,2017,15(6):22-30. 被引量：1
-
8Krishnadash SKshetrimayum,Seongho Park,Chonghun Han,Chul-Jin Lee.EMMS drag model for simulating a gas-solid fluidized bed of geldart B particles: Effect of bed model parameters and polydisperity[J].Particuology,2020,18(4):142-154. 被引量：5
-
9Ying Wu,Daoyin Liu,Jinding Hu,Jiliang Ma,Xiaoping Chen.Comparative study of two fluid model and dense discrete phase model for simulations of gas-solid hydrodynamics in circulating fluidized beds[J].Particuology,2021,19(2):108-117. 被引量：5
-
10Shradha Nikam,Debapriya Mandal,Prasad Dabhade.LDF based parametric optimization to model fluidized bed adsorption of trichloroethylene on activated carbon particles[J].Particuology,2022,20(6):72-92. 被引量：3
-
1李凌松.纺织厂变频器抗干扰技术应用策略[J].变频器世界,2004(12):122-123. 被引量：1
-
2邓年举,付文峰.华中电网远景负荷测算及分析[J].华中电力,1993,0(S2):12-15.
-
3李强,连锦玺.住宅小区用电负荷测算[J].大众用电,2008,24(3):23-24. 被引量：2
-
4姜晋早,余旭.配电变压器容量选择探讨[J].毛纺科技,1995,23(3):52-53.
-
5高岩,邱博,董四意,杨磊,丁学文.转杯纺纱机电磁离合器变频改造的研究与应用[J].棉纺织技术,1998,26(7):46-47.
-
6黄湘焕.农村低压线路负荷测算及导线截面积选择[J].大科技,2013(19):152-153.
-
7陈荣.从某纺织厂的运行实践谈异步电机的故障与保护[J].机床电器,1992(1):59-61.
-
8吕明章.纺织厂设计中电容器无功自动补偿量的计算[J].江西能源,1991(3):9-10.
-
9高梅绪,程光森.一起变压器绝缘故障的分析与处理[J].农村电工,2005,13(10):23-23.
-
10于洋,付丽君.变频调速器在纺织厂空调系统中的应用[J].节能,1998,17(3):32-34. 被引量：4
;
