期刊文献+

直接转矩控制的无刷双馈感应电机的异步启动 被引量:6

Asynchronous starting for BDFIM based on direct torque control strategy
在线阅读 下载PDF
导出
摘要 针对无刷双馈感应电机(BDFIM)异步启动电流及启动转矩的解析分析不足的问题,利用等效电路推导出BDFIM异步启动阶段两个定子绕组的电流和启动转矩的解析表达式。分析结果表明,功率绕组的启动电流小于同容量的感应电机。针对BDFIM直接转矩控制系统牵入同步时电流大的问题,提出了磁链优先的方法,即在牵入同步的过程中,根据控制绕组磁链所在的扇区,选择合适的电压矢量,优先建立磁链,待磁链增加到设定的阈值时,再兼顾磁链和转矩。样机的实验结果表明,磁链优先的控制方法能够有效减小两个定子绕组的牵入电流。 Abstract: For the problem that there is lack of the mathematical analysis for asynchronous starting current and starting torque of brushless doubly-fed induction machine (BDFIM) , a detailed mathematical deriva- tion of two stator windings current and starting torque of BDFIM in asynchronous starting was carried out based on the equivalent circuit. The analysis results show that compared with the induction motor with same capacity, the starting current of power windings of BDFIM is showed smaller; For the problem that the current is large while the BDFIM is pulled into the synchronization in direct torque control for BD- FIM, priority is given to the CW flux control. That is, according to the sector which the control winding flux is in, the appropriate voltage vector was selected to give priority to establish flux while the BDFIM is pulled into the synchronization, the torque wouldn' t be considered until the flux increased to the thresh- old set. The experimental results on prototype show that the current of two stator windings is reduced ef- fectively when the motor is pulling into synchronism by using the control method of flux priority.
出处 《电机与控制学报》 EI CSCD 北大核心 2012年第6期69-74,共6页 Electric Machines and Control
基金 国家自然科学基金(50877051)
关键词 无刷双馈电机 直接转矩控制 异步启动 磁链优先 启动电流 启动转矩 brushless doubly-fed machine direct torque control asynchronous starting flux priority starting current starting torque
  • 相关文献

参考文献7

  • 1SHAO Shiyi, EHSAN A, FARHAD B, et al. Stator-flux-oriented vector control for brushless doubly fed induction enerator [ J ]. IEEE Transactions on Industry Electronics, 2009,56 (10) :4220 - 4228.
  • 2POZA J, OYARBIDE E, SARASOLA I, et al. Vector control design and experimental evaluation for the brushless doubly fed machine [J]. IET Electric Power Applications, 2009,3(4) : 247 -256.
  • 3KOSTYANTYN P, DEWEI X. Modeling and control of brusbless doubly-fed induction generators in wind energy applications [ J ]. IEEE Transactions on Power Electronics, 2008,23 (3):1191 - 1197.
  • 4SARASOLA I, POZA J, RODRIGUEZ M A, et al. Direct torque control design and experimental evaluation for the brushless doubly fed machine [ J ]. Energy Conversion and Management, 2011, 52 (2) :1226 - 1234.
  • 5SHAO Shiyi, ABDI E, MCMAHON R. Operation of brushless dou- bly-fed machine for drive applications [ C ]//4th IET International Conference on Power Electronics, Machines and Drives, PEMD 2008, April 2 - 4, 2008, York, United kingdom. 2008:340 - 344.
  • 6DING Feng, ROBERTS P, RICHARD M. Control study on starting of BDFM [ C]//41st International Universities Power Engineering Conference, UPEC 2006, September 6 - 8, 2006, Newcastle up- on Tyne, United kingdom. 2006:660 - 664.
  • 7邓先明,张海忠,拾华杰.笼形转子无刷双馈电机启动特性分析[J].电机与控制学报,2008,12(5):545-549. 被引量:10

二级参考文献6

  • 1WILLIAMSON S, FERREIRA A C, WALLACE A K. Generalised theory of the brushless doubly-fed machine Part 1 : Analysis [ J], IEEE Proc Electr Power, 1997,144 ( 2 ) : 111 - 122.
  • 2LI Ruqi, ALAN Wallace, REN Spee. Dynamic simulation of brushless doubly-fed machines [ J]. IEEE Trans Energy Conversion, 1991,6(3) : 445 -460.
  • 3WALLACE A K, ROCHELLE P, SPEE R. Rotor modeling and development for brushless doubly-fed machines [ J]. Electric Machines and Power Systems, 1995,23 (2) : 703 - 715.
  • 4.
  • 5.
  • 6.

共引文献9

同被引文献45

引证文献6

二级引证文献38

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部