期刊文献+

喷吹CO_2作为冷却剂的转炉炼钢工艺探索 被引量:4

Exploration of carbon dioxide injection as coolant of converter steelmaking technology
原文传递
导出
摘要 转炉炼钢中期进入碳的剧烈氧化期而使炉温迅速升高,此时需要加入适量冷却剂抑制炉温过高。可以通过双流道氧枪实现用CO2气体作为冷却剂,替代铁矿石、氧化铁皮等固体冷却剂。理论分析可知,CO2作为冷却剂具有与铁矿石相当的冷却效果,同时可以更好地控制转炉钢水温度及成分,简化转炉炼钢设备及工艺。另外,用CO2作为冷却剂其化学反应产物为CO,可以提高转炉煤气的品位,降低整个转炉炼钢工艺的综合能耗。 The temperature of converter rises quickly at the oxidation period and in this juncture some coolant should be put into the converter to control the temperature of converter at a proper level. In the new technology CO2 is blown into bath of the convert- er as coolant to replace the solid coolants such as iron ore, iron scale and so on. By theo- retical analysis it is known that CO2 as coolant possesses the equal cooling ability in comparison with iron ore and at the same time by use of CO2 the temperature and com- positions of the liquid steel in the converter can be easily controlled and the equipments and process for converter steelmaking can be simplified. On the other hand the reactant of CO2 as coolant is CO which can raise the posite energy consumption of the converter quality of converter gas and reduce the corn steelmaking.
作者 盖东兴
出处 《炼钢》 CAS 北大核心 2012年第4期40-42,58,共4页 Steelmaking
关键词 转炉炼钢 双流道氧枪 冷却剂 二氧化碳 converter steelmaking double-channel oxygen lance coolant carbon dioxide
  • 相关文献

参考文献12

二级参考文献23

  • 1李仲文.电炉炼钢烟尘的综合利用[J].南方金属,2005(1):7-9. 被引量:9
  • 2许亚华.电炉粉尘的处理和综合利用[J].钢铁,1996,31(6):66-69. 被引量:14
  • 3马恩祥,蔡志鹏,钱占民,魏伟胜,涂鸿,杨文远,杨同春,高建军,陈峨.120吨复吹转炉双流道氧枪(半模)实验研究[J].钢铁,1990,25(9):17-21. 被引量:7
  • 4D Cartwright, J Clayton. Recycling Oily Millscale and Dust by Injection into The EAF [J]. Steel Times International, 2000, 24 (2) : 42 - 43.
  • 5M C Grimston, B Karakoussis, R Fouquet, et al. The European and Global Potential of Carbon Dioxide Sequestration in Tackling Climate Charge [ J ]. Climate Policy. 2001, 1: 155.
  • 6K Hashimoto, M Yamasaki. Materials for Global Carbon Dioxide Recycling [ J ]. Corrosion Science 2002, 44: 371.
  • 7张译中.日本JRCM开发不产生粉尘的电炉系统.AMM,2002.5.
  • 8Ryoji TSUJINO, Masazumi HIRAI, Takamasa OHNO, Nobuyuki ISHIWATA and Tsutomu INOSHITA. Mechanism of Dust Generation in a Converter with Minimum Slag [ J ]. ISIJ International. 1989, 29 (4) :291 - 299.
  • 9野村宏之,森一美.高炭素领域にぉける溶铁の脱炭反应机构に关する研究[J].铁と钢,1971,9:1468-1473.
  • 10野村宏之,森一美.低炭素领域にぉける溶铁の脱炭反应机构に关する研究[J].铁と钢,1972,1:30-40.

共引文献29

同被引文献26

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部