期刊文献+

泡沫金属吸液芯热管的传热性能 被引量:12

Heat transfer of porous metal foam wick heat pipe
在线阅读 下载PDF
导出
摘要 以水为工质,在自然冷却与水冷的条件下,分别对泡沫镍吸液芯热管和不锈钢丝网吸液芯热管的传热性能进行了实验研究。讨论了两种热管的壁温分布情况与均温性,获得了自然冷却工况与水冷工况下泡沫镍热管管内蒸发传热系数和管内冷凝传热系数随热通量的变化规律,实验结果表明泡沫镍热管具有良好的启动性能,且丝网热管比泡沫镍热管更易出现传热极限。 Using water as working medium,an experimental investigation on heat transfer performance of the nickel foam wick heat pipe and the mesh wick heat pipe was conducted under the conditions of natural cooling and water cooling.The wall temperature distribution and isothermal characteristic of the two heat pipes were discussed.The variation of the evaporation and condensation heat transfer coefficients in the nickel foam wick heat pipe with the heat flux with natural cooling were obtained.In a certain range,the evaporation and condensation heat transfer coefficients increased with the increase of the heat flux.Under the conditions of water cooling,the evaporation heat transfer coefficients in the nickel foam wick heat pipe first increased and then decreased with the increase of the heat flux when the cooling water flow rate was 0.01 m3·h-1.The experimental results indicate that the nickel foam wick heat pipe has a good start-up performance,and the mesh wick heat pipe is easier to reach the heat transfer limit than the nickel foam wick heat pipe.
出处 《化工学报》 EI CAS CSCD 北大核心 2012年第12期3861-3866,共6页 CIESC Journal
基金 江苏省科技计划基金项目(BK2004214)~~
关键词 热管 吸液芯 丝网 多孔泡沫金属 传热性能 heat pipe wick mesh porous metal foam heat transfer
  • 相关文献

参考文献11

二级参考文献70

共引文献59

同被引文献199

引证文献12

二级引证文献54

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部