期刊文献+

环保型聚氨酯防水复合材料的制备与性能研究

Synthesis and mechanical properties of environmental friendly polyurethane composite waterproof material
在线阅读 下载PDF
导出
摘要 将高温煤沥青以粉状填料的形式加入聚氨酯固化体系中,合成了低成本、环境友好型双组分聚氨酯防水复合材料;研究并确定了影响复合材料力学性能、透水性及低温弯折等性能的各参数最优条件:油酸质量分数(2.0%)、—HMOCA摩尔分数(55.6%)、异氰酸酯基质量分数(4.5%~5.0%)、羟醚(N220、N330)摩尔比值(0.6)和扩链系数(0.9);通过紫外光(λ=365 nm)、可见光照射对比实验分析了复合材料的力学性能影响因素,并进行了机理探讨。结果表明,复合材料具有良好的力学性能、防水性能和低温柔韧性,紫外光照射对复合材料的改性有一定的积极作用。 In this paper, two-component waterproof polyurethane waterproof composite-was synthesized via adding coal pitch powder as filler to polyurethane curing reaction system. The influences of contents of oleie acid, MOCA and isocyano group, molar ratios of poly- ether polyols( N220, N330) and chain extension coefficients were researched on the mechanical properties (tensile strength, breaking e- longation rate and tearing strength), water permeability and cryo-flexibility of polyurethane waterproof composite. The modifications of mechanical properties of waterproof composite were investigated during UV irradiation with a mercury lamp (λ =365 nm) and visible light irradiation, respectively. The results showed that the optimum parameters were obtained as follow: the mass fraction of oleie acid mass of B component, the mass fractions of theoretical isooyano group of A component, the molar ratio of polyether polyols ( N220, N330), the molar raction of --HMOCA of B component ( or molar ratio of MOCA to N330) and chain extension coefficient were 2%, 4.5% - 5.0%,0. 6, 55.6% and 0.9, respectively. And ultraviolet-irradiation could enhance the mechanical properties of waterproof composite. Meanwhile, the composite possesses good waterproof property and low temperature flexibility.
作者 耿露 李万捷
出处 《山西化工》 2012年第5期3-7,共5页 Shanxi Chemical Industry
关键词 聚氨酯 煤沥青粉 防水复合材料 紫外光改性 polyurethane coal pitch powder waterproof composite ultraviolet modified
  • 相关文献

参考文献10

  • 1Zhang Q H,Shi Y, Zhan XL, et al. In situ miniemulsionpolymerization for waterborne polyurethahes : kinetics andmodeling of interfacial hydrolysis of isocyanate [ J].Colloids and Surfaces: A: Physicochem Eng Aspects,2012,393:17-26.
  • 2Garcla-Pacios V, Costa V,Colera M,et al. Waterbornepolyurethane dispersions obtained with polycarbonate ofhexanediol intended for use as coatings[ J]. Progress inOrganic Coatings,2011,71(2) :136-146.
  • 3李万捷,杨晋,耿露,姚润生,王志忠.无溶剂煤沥青粉填充聚氨酯防水材料制备和性能[J].化工进展,2008,27(11):1812-1815. 被引量:2
  • 4Conceicao A R, Pimenta E A, Fujisawa R S, et al. Com-parative study of the quantity of volatile organic com-pounds in water-based paint and solvent-based appliedpolyurethane [ J]. Macrmole Cular Symposia, 2012, 316(1):108-111.
  • 5Rosu D, Rosu L, Mustata F, et al. Effect of UV radiation' on some semi -interpenetrating polymer networks based onpolyurethane and epoxy resin [ J]. Polymer Degradationand Stability,2012,97(8) :1261-1269.
  • 6Xu H P, Qiu F X,Wang Y Y, et al. UV-curable water-borne polyurethane-acrylate : preparation, characterizationand properties [ J]. Progress in Organic Coatings ,2012,73(1):47-53.
  • 7Wang W, Sun X M, Wu W, et al. Photoinduced deform-ation of crosslinked liquid-crystalline polymer film orien-ted by a highly aligned carbon nanotube sheet[ J]. AngewChem Int Ed,2012,124( 19) :47224725.
  • 8Raftopoulos K N, Janowski B, Apekis L, et al. Molecularmobility and crystallinity in polytetramethylene ether gly-col in the bulk and as soft component in polyurethanes[J]. European Polymer,2011,47( 11) ;2120-2133.
  • 9潘祖仁.高分子化学[M].第4版.北京:化学工业出版社,2006:193-194.
  • 10周德文,梁利岩,吕满庚.光致变形型高分子材料[J].高分子通报,2008(6):13-18. 被引量:2

二级参考文献33

  • 1吴胜华,姚伯龙,陈明清,熊万斌,刘晓亚.双组分水性聚氨酯涂料的研究进展[J].化工进展,2004,23(9):979-983. 被引量:24
  • 2袁开军,江治,李疏芬,周允基.聚氨酯的热分解研究进展[J].高分子材料科学与工程,2005,21(4):51-54. 被引量:32
  • 3Jacek Machnikowski, Helena Machnikowska, et al. Mesophase development in coal-tar pitch modified with various polymers[J]. Journal of Analytical and Applied Pyrolysis, 2002, 65 : 147-160.
  • 4Sophie Duquesne, Michel le Bras, et al. Thermal degradation of polyurethane and polyurethane/expandable graphite coatings [J]. Polymer DegradationandStability, 2001, 74: 493-499.
  • 5肖瑞华,白金锋,煤化学产品工艺学[M].北京,冶金工业出版社,2004.
  • 6Kumar G S, Neckers D C. Chem Rev, 1989, 89: 1915.
  • 7Kumar G S, DePra P, Neckers D C. Macromolecules,1984, 17: 1912.
  • 8Menju A, Hayashi K, Irie M. Macromolecules, 1981, 14:755 - 758.
  • 9Eisenbach C D. Polymer 1980, 21:1175.
  • 10Finkelmann H, Nishikawa E, Pereira G G, Warner M. Phys Rev Lett, 2001, 87: 015501.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部