摘要
针对四台选煤厂末精煤水分偏高问题,分析了末精煤产品组成和水分,发现粗煤泥和细煤泥水分较高是造成末精煤水分偏高的主要原因。通过将传统弧形筛改造为智能振动筛网式弧形筛,定期翻转弧形筛筛网,在筛面增设挡皮;将FC1200离心机筛篮孔径由0.375 mm增至0.500 mm,调整煤泥旋流器组运行参数;加大压滤机维护力度,根据压滤机入料浓度及时调整压滤机工艺参数;引进HVPF-120 m2立式压滤机;"以灰换水"增加筛分煤系统等措施,使末精煤水分由15.72%降至14.00%以内,减少产品运输系统中胶带机打滑现象,减轻员工劳动强度,外运精煤冻车皮现象得以杜绝,确保了选煤厂正常外运,仅运费一项就节约成本540万元。
To reduce the moisture of fine clean coal of Sitai coal preparation plant,analyse the product composition and moisture,find that high moisture of coarse slime and filter cake are the main reasons.To resolve this problem,take the following measures.First,replace the traditional sieve bend with the intelligent vibratory one,flip the screen surface regularly,add belt to screen surface in order to slow the speed of slurry.Second,increase the sieve seam of FC1200 centrifuge from 0.375 mm to 0.500 mm and adjust the operation parameters of hydrocyclone group. Third, improve maintenance of filter and adjust process parameters promptly according to the feed concentration. Fourth,introduce a vertical filter HVPF-120 m2,and increase ash to lower moisture by adding coal screening system.By these measures, the moisture of fine clean coal decrease from 15.72% to under 14. 00%,which reduce the belt slipping in product transportation system and decrease the labor intensity.Beyond that,the clean coal no longer freeze the railway cars.The measures ensure the normal outward transport of Sitai coal preparation plant and saves transport costs 5.4 ＆#215;106 yuan.
出处
《洁净煤技术》
CAS
2014年第4期20-21,24,共3页
Clean Coal Technology
关键词
末精煤
水分
弧形筛
煤泥离心机
压滤机
fine clean coal
moisture
sieve bend
coal slime centrifuge
filter press
