摘要
针对因缺少空间非合作大目标的全局特征而难以实现相对位姿测量的问题,提出利用点状光源与单目光学相机组成点结构光视觉测量系统进行特征重构与位姿测量的方法。以非合作大目标上尺寸未知的局部矩形特征为测量对象,首先建立点结构光视觉测量系统相对位姿测量模型;接着利用相对约束关系给出特征重构方法并获得隐性特征点;然后利用特征点计算测量系统与非合作大目标之间的相对转移矩阵得到相对位置和姿态。通过数字仿真校验该方法的有效性并对测量误差因素进行分析,仿真结果表明该测量方法是有效的。
A vision system of space robot can not observe a whole feature image of a large non-cooperative target to measure the relative position and attitude. To overcome this problem,apoint structured light vision system composed by apoint structured light and a single camera was established to determine the relative pose. An unknown size partial rectangular framework of the target was chosen as the measurement object.Firstly,the measurement model of the point structured light vision system was built and the relationships were presented.Secondly,according to the intrinsic constraint of the point structured light vision system,a whole feature was reconstructed and four feature points were calculated.Thirdly,the relative transform matrix between the measurement system and the target was computed by the four feature points.And the relative position and attitude was derived from the transform matrix.Finally,numerical simulations were studied to verify the method and the measurement errors were analysed.The results show that this method is effective.
出处
《中国空间科学技术》
EI
CSCD
北大核心
2014年第5期24-31,共8页
Chinese Space Science and Technology
基金
国家自然科学基金(61175098)
航天科技创新基金(CASC201102)资助项目
关键词
点结构光视觉
非合作大目标
特征重构
位姿测量
Point structured light vision
Non-cooperative large target
Feature reconstruction
Pose measurement
