期刊文献+

Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic–sulfuric acid anodizing processes of ZL114A aluminum alloys

Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic–sulfuric acid anodizing processes of ZL114A aluminum alloys
在线阅读 下载PDF
导出
摘要 The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were in- vestigated by optical microscopy (OM) and scanning electron microscopy (SEM). The anodic oxidation was performed at 25℃ and a con- stant voltage of 15 V in a solution containing 50 g/L sulfuric acid and 10 g/L adipic acid. The thickness of the formed anodic oxidation film was approximately 7.13 μm. The interpore distance and the diameters of the major pores in the porous layer of the film were within the ap- proximate ranges of 10~20 nm and 5-10 nm, respectively. Insoluble eutectic Si particles strongly influenced the morphology of the anodic oxidation films. The anodic oxidation films exhibited minimal defects and a uniform thickness on the ZL114A substrates; in contrast, when the front of the oxide oxidation films encountered eutectic Si particles, defects such as pits and non-uniform thickness were observed, and pits were observed in the films. The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were in- vestigated by optical microscopy (OM) and scanning electron microscopy (SEM). The anodic oxidation was performed at 25℃ and a con- stant voltage of 15 V in a solution containing 50 g/L sulfuric acid and 10 g/L adipic acid. The thickness of the formed anodic oxidation film was approximately 7.13 μm. The interpore distance and the diameters of the major pores in the porous layer of the film were within the ap- proximate ranges of 10~20 nm and 5-10 nm, respectively. Insoluble eutectic Si particles strongly influenced the morphology of the anodic oxidation films. The anodic oxidation films exhibited minimal defects and a uniform thickness on the ZL114A substrates; in contrast, when the front of the oxide oxidation films encountered eutectic Si particles, defects such as pits and non-uniform thickness were observed, and pits were observed in the films.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2015年第3期302-308,共7页 矿物冶金与材料学报(英文版)
基金 financially supported by the National Nature Science Foundation of China (No. 21371019) the Aero Science Foundation of China (No. 2011ZE51057)
关键词 aluminum alloys ANODIZING anodic oxidation thin films EUTECTIC silicon PARTICLES aluminum alloys anodizing anodic oxidation thin films eutectic silicon particles
  • 相关文献

参考文献3

二级参考文献52

  • 1文斯雄.铝和铝合金宽温快速阳极氧化[J].航空制造技术,2005,48(1):107-108. 被引量:3
  • 2赵宏娜,梁成浩,王华,梁昆,郑润芬.铝合金棱角部位阳极氧化膜形貌分析[J].电镀与精饰,2005,27(5):4-7. 被引量:3
  • 3蔡健平,李斌,刘明辉,熊家锦,郑亮.阳极化对航空铝合金疲劳性能的影响[J].航空材料学报,2007,27(2):25-28. 被引量:24
  • 4Thomspon G E, Zhang L, Smith C J E, et al. Boricy sulfuric acid anodizing of aluminuna alloys 2024 and 7075 : film growth and corrosion resistance[ J]. Corros Sci Section, 1999, 55 (3) : 11-20.
  • 5Gregory B, Nadine P, Catherine D. FESEM and EIS study of sealed AA2024 T3 anodized in sulfuric acid electrolytes : influence of tartaric acid[ J]. Journal of the Electrochemical Society, 2008, 155 ( 11 ) : C521 -C529.
  • 6Kock E, Beneke M, Gerlach C. Method for anodizing aluminum materials: United States Patent, 0150771 Al[P]. 2005.
  • 7Dattilo A, Tamiro S, Ronmno C. Anodizing process with low environmental impact for a workpiece of aluminum or aluminum alloy: European patent application, EP1233084 A2 [ P]. 2002.
  • 8Domingues L, Femandes J C S, Ferreira M G S, et al. Anodising of A1 2024-T3 in a modified sulphuric acid/boric acid bath for aeronautical applications[ J ]. Corrosion Science, 2003, 45 (3) : 149-160.
  • 9Liu Jianhua, Li Ming, Li Songmei, et al, Effect of rnicrostructure of anodic oxide formation in sulfuric acid[ J]. International Journal of Mineals, Metallurgy and Materials, 2009, 16 (4) : 432-438.
  • 10HB5287-1996,金属材料轴向加载疲劳试验方法[s].北京:中国标准出版社,1996.

共引文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部