摘要
转速变化的滚动轴承故障诊断通常先采用计算阶比跟踪技术消除变转速的影响,再进行阶比分析获得故障特征。然而,等角度重采样会引起冲击包络变形进而导致阶比分析结果产生偏差,在转速变化范围较大时这个偏差必须要受到重视。介绍了等角度重采样方法,仿真了包络变形对阶比分析结果的影响,给出了峰值点间隔变化量详细的理论推导,提出了通过修正角度变换值来消除包络变形影响的方法,并进行了实验验证。研究结果显示,包络在宽窄方向的变形对阶比分析结果没有影响;相邻包络峰值点间隔的变化对阶比分析结果产生影响;在角度序列逐点减去峰值点间隔变化量可消除包络变形对阶比分析结果的影响。
Defects diagnosis of rolling element hearings operating under time-varying rotational speeds entails order tracking and analysis techniques that convert a vibration signal from the time domain to the angle domain to eliminate the effect of speed variations. Angular domain resampling will induce shock envelope deformation leading to errors of analysis, and the effect is particularly noteworthy when the varying rate of speed is significant. This paper presents a quantitative analysis of key factors af- fecting the accuracy of order analysis on rotating machines with varying speeds. An analytical model is established, simulated, and experimentally evaluated. Elimination methods are proposed for which the angle value should be modified by removing the peak interval variations. The research findings show that deformation of the envelope in the width direction has no effect on re- suits of the order analysis; interval variations of adjacent envelope peaks have influence on the results of the order analysis; removing the peak interval variations in angle sequence can eliminate the effects of envelope deformation.
出处
《振动工程学报》
EI
CSCD
北大核心
2015年第3期470-477,共8页
Journal of Vibration Engineering
基金
国家自然科学基金资助项目(51275030)
中央高校基本业务专项资金资助项目(2011BM093)
关键词
故障诊断
滚动轴承
计算阶比跟踪
角域重采样
包络变形
fault diagnosis
rolling bearing
computed order tracking
angular resampling） deformation of envelope
