期刊文献+

破片高速侵彻防护液舱剩余特性研究 被引量:4

Research on residual characteristics of protecting liquid cabin penetrated by high-velocity fragments
在线阅读 下载PDF
导出
摘要 为探讨破片高速侵彻液舱后的剩余特性,通过弹道试验,并结合有限元分析软件Ansys/Ls-Dyna,比较破片侵彻垂直和倾斜液舱后的瞬时余速和运动轨迹。试验结果表明:破片穿透液舱前板初期,会产生空泡和射流,空泡大小和射流强度与破片入水初速有关,而空泡形状和射流方向则受液舱的倾斜角度影响;破片穿透液舱前板后,在水中的运动轨迹会发生偏转,偏转方向与破片入水初速有关。 To explore the residual characteristics of protecting liquid cabin penetrated by high velocity fragments,exper- iments were carried out, and combine Ansys/Ls-Dyna, comparisons between vertical and inclined liquid cabins penetrated by fragments in terms of instantaneous fragment velocities and moving trajectories result show that, in the earlier stage after the fragment perforating the protecting liquid cabin foreplate, cavities and jets are produced. The cavity size and the jet intensity are both related to entry-water initial velocities of fragments, whereas both the cavity shape and the jet direction are affected by the inclined angle of the protecting liquid cabin. After the perforation of protecting liquid cabin foreplate, the moving tra- jectories of fragments will deflect, and the deflection direction is related to entry-water initial velocities of fragments.
出处 《舰船科学技术》 北大核心 2017年第4期49-53,共5页 Ship Science and Technology
基金 国家自然科学基金资助项目(51409253)
关键词 高速侵彻 防护液舱 剩余特性 有限元 high-velocity penetration protecting liquid cabin residual characteristics finite element
  • 相关文献

参考文献7

二级参考文献41

  • 1吴有生,彭兴宁,赵本立.爆炸载荷作用下舰船板架的变形与破损[J].中国造船,1995,36(4):55-61. 被引量:106
  • 2梅志远,朱锡,张立军.高速破片穿透船用钢靶剩余特性研究[J].工程力学,2005,22(4):235-240. 被引量:24
  • 3顾建农,张志宏,范武杰.旋转弹丸入水侵彻规律[J].爆炸与冲击,2005,25(4):341-349. 被引量:40
  • 4蒋增辉,于开平,张嘉钟,王聪,黄文虎.水下航行体通气超空泡形态及阻力特性试验研究[J].工程力学,2007,24(4):152-158. 被引量:17
  • 5虞德水,于川,张远平,等.半穿甲战斗部对模拟舰船结构毁伤效应试验研究[C]//王彦平,第四届爆炸力学实验技术学术会议论文集.2006:294-299.
  • 6Zaid M, Paul B. Oblique perforation of a thin plate by a truncated conical projectile[J]. Journal of the Frankin Institute, 1959,26(8) :22-24.
  • 7Landkof B, Goldsmith W. Petalling of thin, metallic plates during penetration by cylindro-conical projection[J]. International Journal of Solids and Structures, 1985,21(3) :245-246.
  • 8Johnson G R, Cook W H. Fracture characteristics of three metal subjected to various strains, strain rates, temperatures and pressure[J]. Engineering Fracture Mechanics, 1985,21 (1) : 31-48.
  • 9Ravid M, Bonder S R, Holcman I. Penetration into thick targets-refinement of a 2D dynamic plasticity approach [J]. International Journal of Impact Engineering, 1994,15(4) :491-499.
  • 10VARAS D,LOPEZ J P, R. Zaera Experimental analysis of fluid-filled aluminium tubes subjected to high-velocity im- pact [J]. International Journal of Impact Engineering, 2009,36 : 81-91.

共引文献80

同被引文献28

引证文献4

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部