摘要
建立了三维集成成像显示系统的分辨率测试模型,对模型所采用的形状、比例和条纹宽度等进行设计研究.首先,根据集成成像技术多角度拍摄测试模型得到视差图;然后,根据二维分辨率测试卡的测试方法对视差图清晰度线进行标定;最后,计算视差图得到合成图像并显示到集成成像系统上,测试得到系统重构三维物体的分辨率.实验结果表明:该设计支持观察者测试不同角度、不同深度的显示分辨率,量化了集成成像显示系统分辨率.模型包含8级分辨率清晰度线,基本满足当前三维显示系统分辨率的测试范围,可用于测量集成成像显示系统的重构景深和视场角.
The resolution measurement model of three-dimensional integral imaging display system is established,and the shape,scale and fringe width of the model are designed.The model can be used to measure the reconstructed depth of field and field angle of integral imaging display system.First,the parallax map is obtained by taking the test model from multiple angles according to the integral imaging technology.Then,the parallax image definition line is calibrated according to the method of the two-dimensional resolution test card.Finally,the composite image calculated by parallax images is loaded onto the integral imaging system and the the resolution of three-dimensional objects reconstructed by the system can be tested.Experimental results show that this design supports the observer to test the display resolution in different angles and depths,and quantifies the resolution of the integral imaging display system.The model contains 8-level resolution definition line,which basically meets the test range of current three-dimensional display system resolution and can be used to measure the reconstructed depth of field and field angle of integral imaging display system.
作者
王俊夫
张文阁
蒋晓瑜
闫兴鹏
王艺霏
WANG Jun-fu;ZHANG Wen-ge;JIANG Xiao-yu;YAN Xing-peng;WANG Yi-fei(Department of Information and Communication Engineering,Army Armored Forces Academy, Beijing 100072,China)
出处
《光子学报》
EI
CAS
CSCD
北大核心
2018年第11期240-246,共7页
Acta Photonica Sinica
基金
国家重点研发计划(No.2017YFB1104500)
国家自然科学基金(No.61775240)
全国优秀博士学位论文作者专项(No.201432)资助~~
关键词
三维显示
集成成像
分辨率测量
模型构建
Three-dimensional display
Integral imaging
Resolution measurement
Model building
