期刊文献+

基于厚板的弹性环式挤压油膜阻尼器建模及动力学特性系数识别 被引量:9

Numerical modelling of elastic ring squeeze film damper based on thick plate and force coefficient identification
原文传递
导出
摘要 利用数值方法完善了弹性环式挤压油膜阻尼器(elastic ring squeeze film damper,ERSFD)的流固耦合计算模型,其中利用雷诺方程建立油膜的控制方程,利用厚板单元建立了弹性环的运动方程并采用分时迭代方法实现了弹性环-油膜的控制方程的耦合求解从而获得瞬时内外油膜的压力,并进一步识别了油膜以及ERSFD的动力学特性系数。结果表明ERSFD的阻尼系数受凸台高度影响最大,凸台高度从0.15mm增加到0.30mm,ERSFD的阻尼系数从5790(N·s)/m减小到718(N·s)/m;ERSFD刚度系数则主要取决于弹性环的厚度以及凸台数目,弹性环厚度从0.8mm增加到1.0mm,ERSFD的刚度从1.44×106 N/m增加到2.51×106 N/m。 The two way couple model of elastic ring squeeze film damper(ERSFD)was established through numerical approach.The governing equation of the fluid block was obtained by Reynolds equation and the equation of motion of the elastic ring was solved by finite element method with thick plate.The coupled equations were solved through block iteration method.The transient pressure profile of inner film and outer film were obtained and the force coefficients of ERSFD were identified.The results show that the height of the boss has significant influence on the damping of the ERSFD.The increase of the height of the boss from 0.15 mm to 0.30 mm results in a drop of damping from 5790(N·s)/m to 718(N·s)/m.The stiffness coefficients of ERSFD have close relations with the thickness of the ring as well as the number of boss.The increase of thickness of elastic ring from 0.8 mm to 1.0 mm leads to the increase of the stiffness coefficients from 1.44×10^6 N/m to 2.51×10^6 N/m.
作者 王震林 刘占生 张广辉 周泽新 WANG Zhenlin;LIU Zhansheng;ZHANG Guanghui;ZHOU Zexin(School of Energy Science and Engineering,Harbin Institute of Technology,Harbin 150001,China)
出处 《航空动力学报》 EI CAS CSCD 北大核心 2019年第3期635-642,共8页 Journal of Aerospace Power
基金 国家自然科学基金(11572098)
关键词 动力学特性系数 弹性环式挤压油膜阻尼器 流固耦合 有限单元法 雷诺方程 force coefficients elastic ring squeeze film damper fluid-structure interaction finite element method Reynolds equation
  • 相关文献

参考文献6

二级参考文献10

共引文献36

同被引文献60

引证文献9

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部