期刊文献+

液力忆惯容器装置建模与特性试验 被引量:1

Modelling and characteristic test for hydraulic mem-inerter device
在线阅读 下载PDF
导出
摘要 针对液力忆惯容器装置已有数学模型忽略因素过多的问题,考虑油液的惯性、动力学黏度以及装置内部的干摩擦,建立符合工程实际的非线性数学模型.试制液力忆惯容器装置样机,并进行台架试验.结果表明,当位移激励的频率较低时,液力忆惯容器装置提供的惯性力、黏滞阻尼力较小,可以近似等效为干摩擦阻尼器;当激励的频率较高时,装置等效为理想忆惯容器、非线性黏滞阻尼器、干摩擦阻尼器三元件并联.装置的输出合力、惯性力、阻尼力试验值与仿真值最大偏差分别为5.70%、9.15%、5.47%,惯质特性曲线和寄生阻尼特性曲线的试验值与仿真值最大偏差分别为4.23%和8.50%,表明数学模型准确可靠,能够满足工程需要,为液力忆惯容器装置在减振系统中的应用奠定了基础. An advanced nonlinear mathematic model of the hydraulic mem-inerter device was established for engineering applications,considering the fluid mass,viscosity and dry frictions inside the device,since too many factors were ignored in the existing mathematical model.The mem-inerter prototype was fabricated and its bench test was carried on.Results show that the device can be seen as a dry friction damper under low frequency excitation,since the inertance force and the viscous damping force of the device are relatively small.The device under high frequency excitation should be modelled as a parallel connection of an ideal mem-inerter,a nonlinear viscous damper and a dry friction damper.The maximum deviations of the test values and the simulation values of the output force,inertial force and damping force were 5.70%,9.15%and 5.47%,respectively.The maximum deviations of the test values and the simulation values of the characteristic curves for the mem-inerter and damper were 4.23%and 8.50%.Results indicate a high accuracy of the established nonlinear modeling.The mem-inerter device is proved to be able to meet the project needs,which lays a foundation for applications of the mem-inerter in vibration systems.
作者 张孝良 耿灿 聂佳梅 高乔 ZHANG Xiao-liang;GENG Can;NIE Jia-mei;GAO Qiao(School of Automotive and Traffic Engineering,Jiangsu University,Zhenjiang 212013,China)
出处 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2021年第3期430-440,共11页 Journal of Zhejiang University:Engineering Science
基金 国家自然科学基金资助项目(51805223) 江苏省六大人才高峰资助项目(2016-GDZB-097).
关键词 惯容器 记忆元件 非线性阻尼器 非线性模型 台架试验 inerter memory element nonlinear damper nonlinear model bench test
  • 相关文献

参考文献12

二级参考文献98

  • 1许昌,田蔷蔷,Shen Wenzhong,郑源,刘德有,张明.基于ICPSO-PID风电机组桨距控制分析[J].排灌机械工程学报,2013,31(11):973-979. 被引量:3
  • 2李林伟,王磊,朱罗平,施国庆.最小二乘拟合法在大型水电机组安装中的应用[J].排灌机械工程学报,2014,32(1):45-50. 被引量:2
  • 3郜志英,沈允文,董海军,刘梦军.齿轮系统倍周期分岔和混沌层次结构的研究[J].机械工程学报,2005,41(4):44-48. 被引量:22
  • 4赵文礼,周晓军.二自由度含间隙碰撞振动系统的分岔与混沌[J].浙江大学学报(工学版),2006,40(8):1435-1438. 被引量:7
  • 5BONORI G, PELLICANO F. Non-smooth dynamics of spur gears with manufacturing errors [J]. Journal of Sound and Vibration, 2007,306: 271- 283.
  • 6CHEN G. Nonlinear behavior analysis of spur gear pairs with a one-way clutch[J]. Journal of Sound and Vibration, 2007, 301: 760-776.
  • 7ANDERSSON A, VEDMAR L. A dynamic model to determine vibrations in involute helical gears [J]. Journal of Sound and Vibration, 2003,260 : 195 - 212.
  • 8LI M, HUH Y. Dynamic analysis of a spiral bevel-rotor - bearing system [J]. Journal of Sound and Vibration, 2003, 259(3) :605 - 624.
  • 9LI M, HUH Y, JIANG P L, et al. Coupled axial-lateral - torsion dynamics of a rotor-bevel system geared by spur bevel gears [J]. Journal of Sound and Vibration, 2002, 254(3):427-446.
  • 10WANG Li-hua, HUANG Ya-yu, LI Run-fang, et al. Study on nonlinear vibration character of spiral bevel and hypoid gears transmission system [C]// International Conference on Mechanical Transmissions. Beijing: SciencePress, 2006: 1276- 1281.

共引文献93

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部