期刊文献+

Si对高熵合金涂层组织和高温抗氧化性能的影响 被引量:1

Effect of Si on microstructure and high temperature oxidation resistance of high-entropy alloy coatings
原文传递
导出
摘要 研究了Si含量对窄带/宽带激光熔覆NiCoFeCrSi_(x)AlCuTiMoB_(0.4)(x=1.0,0.5)高熵合金涂层组织、相结构及高温抗氧化性能的影响。结果表明:窄带涂层组织为树枝晶,主要相结构为BCC固溶体。宽带涂层为较粗大的树枝晶,相结构由BCC固溶体和存在于枝晶间的B(Fe,Si)_(3)、Cr_(2)B少量第二相组成,且Si元素的减少使得涂层中的B(Fe,Si)_(3)第二相含量减少。宽带涂层经800℃氧化50 h后氧化产物截面主要由富Cr的外氧化层和富Al的内氧化层组成,Si元素含量的增加提高了涂层的抗高温氧化性能,特别是显著降低了内氧化层厚度。 Effect of Si content on microstructure,phase structure and high temperature oxidation resistance of the narrowband/broadband laser clad NiCoFeCrSi_(x)AlCuTiMoB_(0.4)(x=1.0,0.5)high-entropy alloy coatings was studied.The results show that the narrowband clad coating is mainly composed of simple BCC solid solution with dendritic microstructure.In the broadband coating,the phases transform to BCC solid solution with a small amount of B(Fe,Si)_(3)and Cr_(2)B precipitates which are between dendrites,and the content of B(Fe,Si)_(3)reduces with the decrease of Si content.After oxidizing at 800℃for 50 h,the oxidation scale of the broadband clad coating is mainly composed of Cr-rich outer oxide layer and Al-rich inner oxide layer,and the increase of Si content improves the high temperature oxidation resistance of the coating,especially significantly reduces the thickness of internal oxide layer.
作者 马植甄 朱佳浩 张晖 Ma Zhizhen;Zhu Jiahao;Zhang Hui(Technology Center,Shanghai Meishan Iron&Steel Co.,Ltd.,Nanjing Jiangsu 210039,China;School of Materials Science and Engineering,Anhui University of Technology,Ma'anshan Anhui 243002,China)
出处 《金属热处理》 CSCD 北大核心 2021年第8期46-50,共5页 Heat Treatment of Metals
基金 国家自然科学基金(51971001)。
关键词 激光熔覆 高熵合金 组织 氧化层 laser cladding high-entropy alloy microstructure oxide layer
  • 相关文献

参考文献10

二级参考文献98

  • 1阳隽觎,周云军,张勇,陈国良.无基元高混合熵合金形成固溶体结构三原则[J].中国材料科技与设备,2007,4(5):61-63. 被引量:16
  • 2Yeh J W, Chen S K, Lin S J, et al. Nanostructured high-entropy alloys outcomes[J]. Advanced Engineering Materials, 2004, 6(5): 299-303.
  • 3Xu X D, Liu P, Guo S, et al. Nanoscale phase separation in a fcc-based CoCrCuFeNiAl0.5 high-entropy alloy[J]. Acta Materialia, 2015, 84: 145-152.
  • 4Liu W H, He J Y, Huang H L, et al. Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high entropy alloys[J]. Intermetallics, 2015, 60~ 1 8.
  • 5Wang L M, Chen (" C, Yeh J W, et al. The microstructure and strengthening mechanism of thermal spray coating Ni~Co0.~ Fe02 ('rySi~ AITi0. z high-entropy alloys[J]. Materials Chemistry and Physics, 2011, 126 (3) : 880-885.
  • 6Yao C Z,Zhang P, Liu M, et al. Electro-chemical preparation and magnetic study of Bi Fe Co Ni Mn high entropy alloy[J]. Electrochimica Acta, 2008, 53:8359 8365.
  • 7Braeckman B R, Boydens F, Hidalgo H, et al. High entropy alloy thin films deposited by magnetron sputtering of powder targets[J]. Thin Solid Films, 2015, 580(1) : 71 76.
  • 8Zhang H, Pan Y, He Y Z. et al. Mierostructure and properties of 6FeNiCoSiCrA1Ti high-entropy alloy coating prepared by laser cladding [iJ~. Applied SurJace Science, 2011, 257:2259 2263.
  • 9Zhang H, Pan Y, He Y Z. Synthesis and characterization of FeCoNiCrCu high entropy alloy coating by laser cladding[J]. Materials and Design, 2011, 32:1910 1915.
  • 10Zhang H, He Y Z, Pan Y. Enhanced hardness and fracture toughness of the laser solidified FeCoNiCrCuTiMoAISiBr~ s high entropy alloy by martensite strengthening[J]. ScriptaMaterialia, 2013, 69:342 345.

共引文献117

同被引文献7

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部