摘要
首先阐述机床与工件相对运动的去除机理以及对去除函数的稳定性进行表征,然后对工件在平面以不同速度做平动以及绕定点转动得到的去除函数稳定性进行研究,最后通过数值实验验证。得出结论:X方向速度导致去除函数不稳定;Y方向运动速度增大导致去除函数稳定性波动;摆动弧度小于0.5 rad时去除函数越稳定,超过则不稳定。
Firstly, the removal mechanism of the relative motion between the machine tool and the workpiece and the characterization of the stability of the removal function are described. Then, the stability of the removal function obtained by the workpiece movement in a plane at different speeds and rotating around a fixed point is studied. Finally the stability of the removal function is verified via numerical experiments. It is concluded that the speed in the X direction causes the removal function to be unstable;the increase in the movement speed in the Y direction causes the stability of the removal function to fluctuate.
作者
杨航
管瑞
黄文
何建国
YANG Hang;GUAN Rui;HUANG Wen;HE Jianguo(School of Engineering,Zunyi Normal University,Zunyi 563006,Guizhou,China;Institute of Mechanical Manufacturing Technology,China Academy of Engineering Physics,Mianyang 621900,Sichuan,China)
出处
《机械科学与技术》
CSCD
北大核心
2022年第3期439-444,共6页
Mechanical Science and Technology for Aerospace Engineering
基金
国家“高档数控机床与基础制造装备”科技重大专项(2017ZX04022001)
贵州省基础研究计划(黔科合基础-ZK[2021]一般272)
遵义市科技局科技研发项目(遵市科合HZ字[2020]21号)。
关键词
磁流变抛光
去除函数
稳定性
相对运动
数值计算
magnetorheological polishing
removal function
stability
relative motion
numerical calculation
