摘要
为保证船舶载波通信系统在通信过程中的稳定性,同时提升信道容量,研究多载波调制技术在船舶载波通信系统中的应用。该方法结合多进制频移键控(MFSK)和正交多载波调制(OFDM)(2种技术,组成自适应多制式正交多载波技术(MOMC)。发射端以约定的发射功率为依据发射信道测试信号,接收端收到该信号后,预测当前信道离散时变配频率结果,确定通信系统的调制方式和工作频带后;采用基于奇异值低复杂度MOMC的通信系统自适应调制算法,实现船舶载波通信系统载波比特、功率分配。同时通过正交变换模式和调制编码结合方法,控制最大峰值功率,实现船舶载波通信稳定传输。测试结果显示:该方法信号调制性能良好,调制后的信号能够被完整、可靠接收;单位时间内多径分配比特率结果在2.2~2.7 kbps之间,信道容量均在21 bit以上。
To ensure the stability of ship carrier communication system in the communication process,and improve the channel capacity,the application of multi-carrier modulation technology in ship carrier communication system is studied.This method combines the two technologies of multiprecary frequency shift keying(MFSK)and orthogonal multi-carrier modulation(OFDM)to form the adaptive multi-system orthogonal multi-carrier technology(MOMC).The transmitter transmits the channel test signal according to the agreed transmitting power.After receiving the signal,the receiver predicts the result of discrete time-varying frequency distribution of the current channel.After determining the modulation mode and working frequency band of the communication system.An adaptive modulation algorithm based on singular value and low complexity MOMC is adopted to realize carrier bit and power distribution of ship carrier communication system.At the same time,the maximum peak power is controlled by the combination of orthogonal transformation mode and modulation coding method to realize the stable transmission of ship carrier communication.The test results show that the signal modulation performance of this method is good,and the modulated signal can be received completely and reliably.The results of multipath allocation bit rate per unit time range from 2.2 kbps to 2.7 kbps,and the channel capacity is above 21 bit.
作者
张艳芳
叶萧然
ZHANG Yan-fang;YE Xiao-ran(Hebi Institute of Engineering and Technology,Henan Polytechnic University,Hebi 458030,China)
出处
《舰船科学技术》
北大核心
2022年第9期154-157,共4页
Ship Science and Technology
关键词
多载波调制
船舶载波通信
调制方式
工作频带
比特数
信道分配功率
multicarrier modulation
ship carrier communication
modulation mode
operating frequency band
number of bits
channel allocation power
