期刊文献+

Ti掺杂及冷却速率对共晶铝硅合金组织结构的影响

Effect of Ti Doping and Cooling Rate on Microstructure of Eutectic Al Si Alloy
在线阅读 下载PDF
导出
摘要 通过在共晶铝硅合金熔炼的过程中掺杂金属Ti元素进行变质处理,制备掺杂不同Ti含量的共晶铝硅合金。通过金相分析,扫描电镜等实验分析研究Ti掺杂对共晶铝硅合金组织结构影响。结果表明:Ti掺杂能够有效的细化共晶硅组织,当掺杂量为0.6%时可得到最佳的细化效果。冷却速率可以提高Ti对共晶铝硅合金的变质效果,当冷却速率为50℃/s时,共晶铝硅合金中的层片状硅可完全转变为纤维状。 Eutectic Al Si Alloys doped with different Ti content were prepared by doping metal Ti and modifying metal elements in the melting process of eutectic Al Si alloy.The effect of Ti doping on the microstructure of eutectic Al Si alloy was studied by metallographic analysis and scanning electron microscope.The results show that Ti doping can effectively refine the eutectic silicon structure,and the best refining effect can be obtained when the doping amount is 0.6%.The cooling rate can improve the modification effect of Ti on eutectic Al Si alloy.When the cooling rate is 50℃/s,the lamellar silicon in eutectic Al Si alloy can be completely transformed into fiber.
作者 刘士斌 王静 许建伟 李洋洋 LIU Shibin;WANG Jing;XU Jianwei;LI Yangyang(Materials Science and Engineering,Jiamusi University,Jiamusi Heilongjiang 154007,China;Materials Science and Engineering,Baise University,Baise Guangxi 533000,China)
出处 《佳木斯大学学报(自然科学版)》 CAS 2022年第3期99-102,共4页 Journal of Jiamusi University:Natural Science Edition
基金 黑龙江省教育厅基本科研业务费(2017-KYYWF-0589)。
关键词 共晶铝硅合金 冷却速率 变质处理 Ti掺杂 eutectic Al Si alloy cooling rate modification Ti doping
  • 相关文献

参考文献7

二级参考文献38

共引文献133

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部