期刊文献+

常压蒸馏塔塔顶回流管线露点腐蚀形成机制及影响因素研究 被引量:2

RESEARCH ON FORMATION MECHANISM AND INFLUENCING FACTORS OF DEW POINT CORROSION IN ATMOSPHERIC DISTILLATION COLUMN OVERHEAD LINE
在线阅读 下载PDF
导出
摘要 针对某石化企业常压蒸馏塔塔顶(简称常顶)回流管线出现的露点腐蚀问题,采用基于烃水二元交互的PR(Peng-Robinson)状态方程法,建立标定工况下常顶回流系统工艺计算模型。结合露点形成机制,分析露点出现前后腐蚀性介质在油气水三相中的分布变化;研究不同注水比例下塔顶回流管线中HCl和H_(2)S的分布情况以及原料油中不同S、N含量及常顶油量下塔顶压力、汽提蒸汽量及注水比例对露点温度的影响。结果表明:HCl和H_(2)S是引起露点腐蚀的关键影响因素,随着冷凝过程的进行,塔顶回流管线中的HCl含量不断增加,H_(2)S含量呈现先增加后降低的趋势;标定工况下塔顶水的露点温度为100.45℃,塔顶压力、汽提蒸汽量及注水比例与露点温度均呈正相关性,其中塔顶压力对露点温度的影响最大,平均每增加0.02 MPa,相应露点温度升高2.97℃。 In order to solve the dew point corrosion problem in the atmospheric distillation column overhead line in a petrochemical enterprise,the PR(Peng-Robinson)state equation method based on the binary interaction of hydrocarbon and water was adopted,and the process calculation model of the overhead system under standard conditions was established.Based on the mechanism of the dew point formation,the state changes of the corrosive medium in the oil-gas-water three-phase before and after the dew point were analyzed.The distribution of HCl and H_(2)S in the overhead line of the column under different water injection ratios and the influence of top pressure,stripping steam volume and water injection ratio on dew point temperature under different S and N contents in the feed oil and constant oil content were studied.The results showed that HCl and H_(2)S were the key factors causing dew point corrosion.With the condensation process,the content of HCl in the overhead line of the column increasesd,and the content of H_(2)S increased first and then decreased.The dew point temperature of the overhead water is 100.45℃,and there is a positive correlation between the column top pressure,stripping steam quantity,the water injection ratio and the dew point temperature,the average dew point temperature increases by 2.97℃per 0.02 MPa of top pressure increases.
作者 偶国富 陶情情 金浩哲 Ou Guofu;Tao Qingqing;Jin Haozhe(Institute of Flow-Induced Corrosion and Intelligent Prevention and Control,Changzhou University,Changzhou,Jiangsu 213164;Institute of Flow-Induced Corrosion,Zhejiang Sci-Tech University)
出处 《石油炼制与化工》 CAS CSCD 北大核心 2023年第4期125-132,共8页 Petroleum Processing and Petrochemicals
基金 国家自然科学基金项目(U1909216,52176048)。
关键词 常压蒸馏塔 塔顶回流管线 露点温度 塔顶压力 汽提蒸汽量 注水比例 atmospheric distillation column overhead reflux line dew point temperature overhead pressure stripping steam volume water injection ratio
  • 相关文献

参考文献4

二级参考文献61

  • 1李宁.原油中氯对催化分馏塔的危害及解决措施[J].天然气与石油,2005,23(3):52-54. 被引量:30
  • 2何庆龙,孟惠民,俞宏英,樊自拴,王旭东,孙冬柏.N80油套管钢CO_2腐蚀的研究进展[J].中国腐蚀与防护学报,2007,27(3):186-192. 被引量:37
  • 3姚静博.催化重整过程中氯化物腐蚀防止探讨[J].石油化工腐蚀与防治,2008,25(1):56-58.
  • 4液化石油气质量检验编写组.原油轻烃、原油、轻烃、液化石油气质量检验[M].北京:石油工业出版社,2001.
  • 5G T.he Action of Anhydrous Stannic Chloride on Petroleum and Its Distillates[J].Journal of Industrial and Engineering Chemistry,1921,13(10):923-924.
  • 6Yudovich Y E,Ketris M P.Chlorine in Coal:A Review[J].International Journal of Coal Geology,2006,67:127-144.
  • 7中国石油和石化工程研究会.炼油催化剂[M].北京:中国石化出版社,2006.
  • 8顾望平.炼油厂氯化铵腐蚀探讨[A].中国机械工程学会压力容器分会.中国机械工程学会压力容器分会第七届压力容器及管道使用管理学术会议暨使用管理委员会七届二次会议论文集[C].合肥:中国机械工程学会压力容器分会,2011:11.
  • 9Su A D,Fan D Y.Prediction monitoring and control of ammonium chloride corrosion in refining processes[R].Houston,2010.
  • 10张哲,张永刚.120万吨催化分馏塔结盐分析与对策[J].金田,2013,08:348+330.

共引文献22

同被引文献21

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部