摘要
磁电复合材料由于其优异的磁场测量性能,在电流传感领域具有极大的应用潜力。本文对磁芯的开合形状进行优化,提出了一种齿形开合式闭环磁电电流传感器,由FeSiB/PZT-fiber/FeSiB磁电复合材料、硅钢磁芯以及永磁体组成。对比分析齿形开合和平面开合磁芯结构对电流传感器性能影响;实验结果表明,齿形开合结构的磁场汇聚能力更强,在被测电流为0~5.5A范围的工频(50Hz)电流时,是平面开合结构灵敏度的3倍;此外,齿形开合电流传感器始终表现出良好的线性度、较小的迟滞性和较强的稳定性。本文提出的齿形开合磁电电流传感器在工频小电流监测领域有广阔的发展前景。
Magnetoelectric composites have great application potential in the field of current sensing due to their excellent magnetic field measurement performance.The opening and closing shape of the magnetic core is optimized,and a tooth-shaped opening and closing closed-loop magnetoelectric current sensor is proposed,which is composed of FeSiB/PZT-fiber/FeSiB magnetoelectric composite,silicon steel core and permanent magnet.Comparative analysis is conducted on the effects of tooth shaped and planar opening and closing magnetic core structures on the performance of current sensors.The experimental results show that the magnetic field convergence ability of the tooth shaped structure is stronger.When measuring the power frequency of 50 Hz in current range of 0~5.5 A,its sensitivity is 3 times that of the planar opening and closing structure;In addition,it shows good linearity,small hysteresis and strong stability.The proposed tooth-shaped opening and closing magnetoelectric current sensor has a broad prospect in the field of power frequency small current monitoring.
作者
辛明勇
王景琦
祝健杨
何雨旻
张紫嫣
鲁彩江
XIN Mingyong;WANG Jingqi;ZHU Jianyang;HE Yumin;ZHANG Ziyan;LU Caijiang(Electric Power Research Institute of Guizhou Power Grid Co Ltd,Guiyang 550005,China;School of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China)
出处
《传感器与微系统》
北大核心
2025年第2期35-38,共4页
Transducer and Microsystem Technologies
基金
贵州电网有限责任公司科技项目(GZKJXM20220045)
国家自然科学基金资助项目(52175519,61801402)
四川省杰出青年科技人才项目(2020JDJQ0038)
贵州省科技创新人才技术团队(黔科合平台人才【2020】5015)。
关键词
磁电复合材料
电流传感器
齿形磁芯
交流电流检测
magnetoelectric composite
current sensor
tooth-shaped magnetic core
AC current detection
