The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper...The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper presents a new approach to rank the alternatives by G1-coefficient of variation method.The focus of this approach is the use of the combination weighing,which is able to compensate for the deficiencies in the method of evaluation index single weighing.In the case study,an appropriate evaluation index system was established to determine the evaluation value of each ventilation mode.Then the proposed approach was used to select the best development face ventilation mode.The result shows that the proposed approach is able to rank the alternative development face ventilation mode reasonably,the combination weighing method had the advantages of both subjective and objective weighing methods in that it took into consideration of both the experience and wisdom of experts,and the new changes in objective conditions.This approach provides a more reasonable and reliable procedure to analyse and evaluate different ventilation modes.展开更多
In order to shorten the difference between the raw silk size grading standards of the world and that of China, to quicken the step of the electronic raw silk testing process, the distribution of the coefficient of var...In order to shorten the difference between the raw silk size grading standards of the world and that of China, to quicken the step of the electronic raw silk testing process, the distribution of the coefficient of variation (CV50m%) of the raw silk size in the electronic testing and the development of the new standards are studied according to the sampling and grading theory. By the theoretical deduction and the simulating experiments, the distribution of the coefficient of variation of the raw silk size is given, and the grading scheme whose quality index is the coefficient of variation(CV50m%)of the raw silk size and the grading precisions of all grades are proposed. Moreover, the rightness and the feasibility of the grading scheme are testified by the sampling and grading simulation.展开更多
In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validati...In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.展开更多
The Coefficient of Variation(CV)of hectometer yarn's weight is one of the guidelines to evaluate its intrinsic quality.In the spinning manufacturing,the control of cotton yarn's weight unevenness is accomplish...The Coefficient of Variation(CV)of hectometer yarn's weight is one of the guidelines to evaluate its intrinsic quality.In the spinning manufacturing,the control of cotton yarn's weight unevenness is accomplished mainly in terms of a spot-check on semi-product and a succedent adjust in process parameters during spinning based on technicians' experience.However,it is theoretically believed among manufacturers that with fixed technical levels and parameters in the spinning process,the quality parameters of assorted cotton have a certain influence on the CV.In order to find out a rule of the influence that assorted cotton has on the CV,a GM(1,N)model,correlated raw cotton's quality parameter with the CV,has firstly been developed according to the modeling theory of grey system,and then been applied in the designing step to predict the CV.It has been approved by practical modeling and validation that the model could fit preferably an accrual CV value,and provide a method of quantitative predicting analysis for textile manufacturers to design cotton yarn's quality.展开更多
Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failur...Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.展开更多
The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineer...The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineering needs. Using Odeh and Owen's computational method and Brent's algorithm, the tables for the r-upper exact classical limits of coefficient of variation for normal distribution are calculated for the different confidence coefficient y, the sample size n=1(1)30,40,60,120, the sample coefficient of variation c=0.01(0.01)0.20. It is shown that if n<8,c<0.20, then the V -upper exact classical limits cu for c are slightly higher than the exact fiducial limits cu,F for c if. n>8, c<0.02,then cu-cu,f<5x10-6展开更多
Accurate estimation of Weibull parameters is an important issue for the characterization of the strength variability of brittle ceramics with Weibull statistics.In this paper,a simple method was established for the de...Accurate estimation of Weibull parameters is an important issue for the characterization of the strength variability of brittle ceramics with Weibull statistics.In this paper,a simple method was established for the determination of the Weibull parameters,Weibull modulus m and scale parameter σ0,based on Monte Carlo simulation.It was shown that an unbiased estimation for Weibull modulus can be yielded directly from the coefficient of variation of the considered strength sample.Furthermore,using the yielded Weibull estimator and the mean value of the strength in the considered sample,the scale parameter σ0 can also be estimated accurately.展开更多
To identify the root causes of heavy metal contamination in soils as well as prevent and control such contamination from its sources,this study explored the accumulation patterns and ecological risks of heavy metals l...To identify the root causes of heavy metal contamination in soils as well as prevent and control such contamination from its sources,this study explored the accumulation patterns and ecological risks of heavy metals like Cd and Pb in solid waste in mining areas and across the water body,sediment,soil and agricultural product ecosystem surrounding the mining areas.Focusing on the residual solid waste samples in lead-zinc deposits in a certain area of Guizhou Province,along with samples of topsoils,irrigation water,river sediments,and crops from surrounding areas.This study analyzed the distributions of eight heavy metals,i.e.,Cd,As,Cr,Hg,Pb,Zn,Cu,and Ni,in the samples through field surveys and sample tests.Furthermore,this study assessed the contamination levels and ecological risks of heavy metals in soils,sediments,and agricultural products using methods such as the single-factor index,Nemerow composite index,and potential ecological risk assessment.The results indicate that heavy metals in the solid waste samples all exhibited concentrations exceeding their risk screening values,with 60%greater than their risk intervention values.The soils and sediments demonstrate slight and moderate comprehensive ecological risks of heavy metals.The single-factor potential ecological risks of heavy metals in both the soil and sediment samples decreased in the order of Hg,Cd,Pb,As,Cu,Zn,Cr,and Ni,suggesting the same sources of heavy metals in the soils and sediments.Most of the agricultural product samples exhibited over-limit concentrations of heavy metals dominated by Cd,Pb,Ni,and Cr,excluding Hg and As.The agricultural product assessment using the Nemerow composite index reveals that 35%of the agricultural product samples reached the heavy metal contamination level,implying that the agricultural products from farmland around the solid waste dumps have been contaminated with heavy metals.The eight heavy metals in the soil,sediment,and agricultural product samples manifested high coefficients of variation(CVs),indicating pronounced spatial variability.This suggests that their concentrations in soils,sediments,and agricultural products are significantly influenced by human mining activities.Additionally,the agricultural products exhibit strong transport and accumulation capacities for Cd,Cu,and Zn.展开更多
Plant-to-plant variability is a crop stability component.The objective of this study in maize(Zea mays L.)was to test the validity of the theoretical background of the hypothesis that the coefficient of variation(CV)f...Plant-to-plant variability is a crop stability component.The objective of this study in maize(Zea mays L.)was to test the validity of the theoretical background of the hypothesis that the coefficient of variation(CV)for grain yield per plant and mean yield are connected exponentially,following the Taylor’s Power Law(TPL)Model.Field experimentation was conducted across two sites,two seasons,and two planting densities.Densities were the main plots,corresponding to the typical practice of 8.89 plants m–2(TCD)and the low-input optimal of 5.33 plants m–2(LCD),while hybrids were the subplots.Data from 26 subplots in the first site averaged CV values of 22.6%at the TCD and 21.9%at the LCD,and mean yields of 19.1 and 13.9 t ha–1,respectively,following the TPL Model.The same was true for the second site,with average CVs and means of 41.5%and 14.3 t ha–1 at the TCD and 36.8%and 11.5 t ha–1 at the LCD.A test was performed on the simple correlation between the logarithms of variances and their respective means to investigate whether there is a systematic variance dependence on mean,thus questioning the reliability of TPL.The validity of TPL was verified in the first site.Nevertheless,there was a systematic dependence of yield variance on mean yield in the second site,implying that the CV-yield correlation might be not biologically meaningful.Conversion of the variance to remove its dependence on the mean did not validate the CV-yield negative relationship,meaning that caution is needed when interpreting the CV as a stability index for intra-crop variation.Whether the determinant factor of invalidity of TPL was the extensive intra-crop variation in the lower yielding second site can be assessed in future research.展开更多
The proper selection of a relevant mixer generally requires an effective assessment of several models against theapplication requirements. This is a complex task, as traditional evaluation methods generally focus only...The proper selection of a relevant mixer generally requires an effective assessment of several models against theapplication requirements. This is a complex task, as traditional evaluation methods generally focus only on a single aspect of performance, such as pressure loss, mixing characteristics, or heat transfer. This study assesses aurea-based selective catalytic reduction (SCR) system installed on a ship, where the installation space is limitedand the distance between the urea aqueous solution injection position and the reactor is low;therefore, the staticmixer installed in this pipeline has special performance requirements. In particular, four evaluation indices areused in this study: The B value, C value, pressure loss correction factor (Z′), and the ratio of the required distanceto the equivalent diameter of the pipe (LV/D) when the velocity field after the mixer attains uniformity. Six typesof static mixers were simulated with varying concentrations, flow speeds, and positions. A fuzzy comprehensiveevaluation method was introduced to evaluate and compare the related advantages and disadvantages. The resultsshowed that 1) mixing performance was related to the shape of the mixer and had no direct relationship with flowvelocity. 2) For the same mixer position, the lower the urea concentration, the greater the difficulty of evenly mixing the solution. 3) At a constant urea concentration, the mixing performance improved when the mixer was closer to the injection inlet. 4) The installation of a GK mixer in the SCR system of a 9L20C diesel engine was best.展开更多
The lack of suitable varieties is a constraint to okra production in West Africa. This study aimed to assess the magnitude of morphological diversity of 260 accessions of okra (Abelmoschus esculentus L. Moench) in Mal...The lack of suitable varieties is a constraint to okra production in West Africa. This study aimed to assess the magnitude of morphological diversity of 260 accessions of okra (Abelmoschus esculentus L. Moench) in Mali. A total of 25 qualitative and quantitative traits, including plant height, number of branches, pod length, and pod yield, were measured under field conditions. Significant variation was observed for all agronomic traits (p 2 < 60), suggesting that these traits are largely controlled by genetic factors. The pod yield was affected by the incidence of diseases. Principal component analysis (PCA) revealed four distinct clusters, indicating a broad genetic base. These findings provide valuable insights for breeding programs targeting improved okra varieties with enhanced yield and resilience, contributing to sustainable agricultural development in Mali.展开更多
The flow and mixing behavior of two miscible liquids has been studied in an innovative static mixer by using CFD,with Reynolds numbers ranging from 20 to 160.The performance of the new mixer is compared with those of ...The flow and mixing behavior of two miscible liquids has been studied in an innovative static mixer by using CFD,with Reynolds numbers ranging from 20 to 160.The performance of the new mixer is compared with those of Kenics,SMX,and Komax static mixers.The pressure drop ratio(Z-factor),coefficient of variation(CoV),and extensional efficiency(α)features have been used to evaluate power consumption,distributive mixing,and dispersive mixing performances,respectively,in all mixers.The model is firstly validated based on experimental data measured for the pressure drop ratio and the coefficient of variation.CFD results are consistent with measured data and those obtained by available correlations in the literature.The new mixer shows a superior mixing performance compared to the other mixers.展开更多
Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone （ATE） of Taihu Lake were investigated, and the relations among N, P, ORP （oxidation reduction potential）, TOC, root sy...Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone （ATE） of Taihu Lake were investigated, and the relations among N, P, ORP （oxidation reduction potential）, TOC, root system biomass and microorganism were studied. As a whole, significant declines in TN, NO3^--N, DON （dissolved organic nitrogen） and TP concentration in soil solution have occurred with increase of the depth, and reached their minima at 60 cm depth, except for NH4^＋-N, which increased with depth. The concentration of TP increased gradually from spring to winter in the topsoil, the maximum 0.08 mg/L presented in the winter while the minimum 0.03 mg/L in spring. In the deeper layer, the concentration value of TP fluctuated little. As for the NO3^--N, its seasonal variation was significant at 20 cm depth, its concentration increased gradually from spring to autumn, and decreased markedly in winter. Vertical and temporal distribution of DON is contrary to that of NO3^--N. The results also show that the variation of N and P in the percolate between adjacent layers is obviously different. The vertical variation ofTN, TP, NO3^--N, NH4^＋-N and DON is significant, of which the variation coefficient of NO3^--N along the depth reaches 100.23%, the highest; while the variation coefficient of DON is 41.14%, the smallest. The results of correlation analysis show that the concentration of nitrogen and phosphorus correlate significantly with TOC, ORP, root biomass and counts of nitrifying bacteria. Most nutrients altered much from 20 to 40 cm along the depth. However, DON changed more between 60 and 80 cm. Results show that soil of 0-60 cm depth is active rhizoplane, with strong capability to remove the nitrogen and phosphorus in ATE. It may suggest that there exists the optimum ecological efficiency in the depth of above 60 cm in reed wetland. This will be very significant for ecological restoration and reestablishment.展开更多
The exceptionally large individual growth variation has been previously recognized in several sea cucumber cohorts. However, there is a lack of information regarding the mechanism of such individual differences. In th...The exceptionally large individual growth variation has been previously recognized in several sea cucumber cohorts. However, there is a lack of information regarding the mechanism of such individual differences. In this study, the sea cucumber Apostichopusjaponicus （Selenka） was reared individually in order to eliminate possible effects of social interaction, stocking density, etc. The results showed that there were substantial differences in growth among the sea cucumber individuals during the 100-day experiment. The special growth rate of the sea cucumber individuals differed by up to three folds （from 0.40% to 1.01%）, and the coefficient of variation in body weight increased from 12.04% to 40.51%. The final wet body weight, food intake and food conversion efficiency for each sea cucumber were generally positively correlated with their initial wet body weight （P〈0.05）. Energy budget of the animals showed that the food energy spent on respiration was much greater （about four folds） but energy deposited for growth was much less for （initially） smaller than for larger A. japonicus. The present result implies that there are obvious genetic differences among the sea cucumber individuals, largely accounting for the individual growth variation of the cohort sea cucumber. These results will provide some basic data for promoting selective breeding and fanning of the sea cucumber.展开更多
Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77...Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77 field cases,5 quantitative indicators are selected to improve the accuracy of prediction models for slope stability.These indicators include slope angle,slope height,internal friction angle,cohesion and unit weight of rock and soil.Potential data aggregation in the prediction of slope stability is analyzed and visualized based on Six-dimension reduction methods,namely principal components analysis(PCA),Kernel PCA,factor analysis(FA),independent component analysis(ICA),non-negative matrix factorization(NMF)and t-SNE(stochastic neighbor embedding).Combined with classic machine learning methods,7 prediction models for slope stability are established and their reliabilities are examined by random cross validation.Besides,the significance of each indicator in the prediction of slope stability is discussed using the coefficient of variation method.The research results show that dimension reduction is unnecessary for the data processing of prediction models established in this paper of slope stability.Random forest(RF),support vector machine(SVM)and k-nearest neighbour(KNN)achieve the best prediction accuracy,which is higher than 90%.The decision tree(DT)has better accuracy which is 86%.The most important factor influencing slope stability is slope height,while unit weight of rock and soil is the least significant.RF and SVM models have the best accuracy and superiority in slope stability prediction.The results provide a new approach toward slope stability prediction in geotechnical engineering.展开更多
Functional traits, specifically leaf functional traits, are core-topics to explore importance to the invasion success of invasive plant species. This study aims to address the differences in leaf functional traits and...Functional traits, specifically leaf functional traits, are core-topics to explore importance to the invasion success of invasive plant species. This study aims to address the differences in leaf functional traits and their corresponding variability of the invasive tree staghorn sumac Rhus typhina L. with different invasion success, including lower and higher invasion success, in two climatic regions in North China, including a warm temperate region and a cold temperate region. No significant differences were found for leaf functional traits of staghorn sumac across different invasion success. However, the variability of leaf chlorophyll and nitrogen concentrations of staghorn sumac under higher invasion success were approximately 66.023% and 68.615% higher than those under lower invasion success, respectively. The leaf chlorophyll and nitrogen concentrations of staghorn sumac in the warm temperate region were approximately 18.432% and 16.337% higher than those in cold temperate region, respectively. The variability of specific leaf area of staghorn sumac in warm temperate region was approximately 59.802% higher than that in cold temperate region. Accordingly, leaf chlorophyll and N concentrations as well as specific leaf area of staghorn sumac and their corresponding variability may play an essential role in shaping ecological success of studied invader along a climatic gradient.展开更多
Post-construction settlement has gained increasing attention because it frequently causes engineering problems. A combined model is a commonly used prediction model that overcomes the difficulty of a single model( i. ...Post-construction settlement has gained increasing attention because it frequently causes engineering problems. A combined model is a commonly used prediction model that overcomes the difficulty of a single model( i. e., cannot reflect various regulations of settlement at some stages or the entire process). In this study,the correlation coefficient,maximum error values,and other values were obtained according to the fitting and predicted results of a single model. The coefficient of variation was then introduced to determine the weight of each model forming the combination. The proposed model was used to fit and predict for settlement and overcome the issue of utilizing a single model while determining the weight. The fitting predictive effect was also analyzed using the settlement fitting precision results. The fitting precision of optimizing the combination model is high. The predicted data of the post-construction settlement are closer to the calculated value of the settlement monitoring data. Moreover,the proposed model has good practicability,does not require the interval data of settlement,and restricts the model number. Thus,this model can be applied in the engineering field.展开更多
This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric paramet...This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric parameter distributions is proposed in this work.The proposed method can quickly and simply determine the size effects and representative elementary sizes.Specifically,geometric parameter distributions,including fracture frequency,size and orientation,are generated on the basis of the Bernoulli trial and Monte Carlo simulation.The distributions are assessed using the coefficient of variation(CV),and the acceptable variations for CV(5%,10%and 20%)are used to determine representative elementary sizes.Generally,the representative element of rock masses is the representative elementary volume(REV).The present study extends the representative element to other dimensions,i.e.representative elementary length(REL)and representative elementary area(REA)for one and two dimensions,respectively.REL and REA are useful in studying the size effects of one-(1D)and twodimensional(2D)characteristics of rock masses.The relationships among multi-dimensional representative elementary sizes are established.The representative elementary sizes reduce with the increase in the dimensions,and REA and REV can be deduced by REL.Therefore,the proposed method can quickly and simply determine REL and further estimate REA and REV,which considerably improves the efficiency of rock mass analysis.展开更多
Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The ...Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The random movement of mobile terminals in the indoor environment is a challenge in the VLC system.The model of optical attocells has a critical role in the uniform distribution and the quality of communication links in terms of received power and signal-to-noise ratio(SNR).As such,the optical attocells positions were optimized in this study with a developed try and error(TE)algorithm.The optimized optical attocells were examined and compared with previous models.This novel approach had successfully increased minimum received power from−1.29 to−0.225 dBm,along with enhanced SNR performance by 2.06 dB.The bit error rate(BER)was reduced to 4.42×10−8 and 6.63×10−14 by utilizing OOK-NRZ and BPSK modulation techniques,respectively.The optimized attocells positions displayed better uniform distribution,as both received power and SNR performances improved by 0.45 and 0.026,respectively.As the results of the proposed model are optimal,it is suitable for standard office and room model applications.展开更多
Since the 17th National Congress of the Communist Party of China, ecological civilization has been the key construction goal in China, which has a profound impact on the process of urbanization. In recent years, with ...Since the 17th National Congress of the Communist Party of China, ecological civilization has been the key construction goal in China, which has a profound impact on the process of urbanization. In recent years, with the rapid development of urbanization and unreasonable land development and utilization, the ecological environment has deteriorated sharply, and the stability of ecological environment has always been a difficult problem in the process of regional development. The spatial division of urban ecological function can be divided into different types of spatial utilization according to the fragile state of ecological environment, which not only guarantees urban construction but also maintains the ecological environment health, and has great economic benefits and ecological value in formulating regional development strategies and ecological protection. In this paper, from four perspectives of “land, water, human and forest”, eight factors affecting ecological sensitivity were selected, and GIS spatial superposition method was used to conduct qualitative and quantitative analysis on the ecological sensitivity of Baoji City, and the evaluation results of single factor ecological sensitivity and comprehensive ecological sensitivity were obtained. The areas with different ecological sensitivity are divided into extremely sensitive areas, highly sensitive areas, moderately sensitive areas, slightly sensitive areas and non-sensitive areas. The research shows that the proportion of extreme, high, moderate, mild and insensitive areas in Baoji City is 7.32%, 10.57%, 22.25%, 42.91% and 16.95% respectively. Finally, the areas with different sensitivity grades are identified as three types of urban ecological function areas: ecological conservation area, ecological coordinated moderate utilization area and ecological suitable construction area, so as to provide scientific theoretical basis for urban construction and land use optimization in Baoji City.展开更多
基金Projects(51504286,51374242)supported by the National Natural Science Foundation of ChinaProject(2015M572270)supported by China Postdoctoral Science FoundationProject(2015RS4004)supported by the Science and Technology Plan of Hunan Province,China
文摘The current popular methods for decision making and project optimisation in mine ventilation contain a number of deficiencies as they are solely based on either subjective knowledge or objective information.This paper presents a new approach to rank the alternatives by G1-coefficient of variation method.The focus of this approach is the use of the combination weighing,which is able to compensate for the deficiencies in the method of evaluation index single weighing.In the case study,an appropriate evaluation index system was established to determine the evaluation value of each ventilation mode.Then the proposed approach was used to select the best development face ventilation mode.The result shows that the proposed approach is able to rank the alternative development face ventilation mode reasonably,the combination weighing method had the advantages of both subjective and objective weighing methods in that it took into consideration of both the experience and wisdom of experts,and the new changes in objective conditions.This approach provides a more reasonable and reliable procedure to analyse and evaluate different ventilation modes.
基金Research Foundation of Ministry of Education for Doctoral Program(No.20040285008)
文摘In order to shorten the difference between the raw silk size grading standards of the world and that of China, to quicken the step of the electronic raw silk testing process, the distribution of the coefficient of variation (CV50m%) of the raw silk size in the electronic testing and the development of the new standards are studied according to the sampling and grading theory. By the theoretical deduction and the simulating experiments, the distribution of the coefficient of variation of the raw silk size is given, and the grading scheme whose quality index is the coefficient of variation(CV50m%)of the raw silk size and the grading precisions of all grades are proposed. Moreover, the rightness and the feasibility of the grading scheme are testified by the sampling and grading simulation.
基金Project supported by the National Natural Science Foundation of China(Grant No.40976108)the Shanghai Leading Academic Discipline Project(Grant No.J50103)
文摘In remote sensing sea surface temperature （SST）, the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.
基金Hunan Provincial Basic Science Foundation of China(No.2007FJ3046)Key Scientific Research Fundof Hunan Provincial Education Department,China(No.07A048)
文摘The Coefficient of Variation(CV)of hectometer yarn's weight is one of the guidelines to evaluate its intrinsic quality.In the spinning manufacturing,the control of cotton yarn's weight unevenness is accomplished mainly in terms of a spot-check on semi-product and a succedent adjust in process parameters during spinning based on technicians' experience.However,it is theoretically believed among manufacturers that with fixed technical levels and parameters in the spinning process,the quality parameters of assorted cotton have a certain influence on the CV.In order to find out a rule of the influence that assorted cotton has on the CV,a GM(1,N)model,correlated raw cotton's quality parameter with the CV,has firstly been developed according to the modeling theory of grey system,and then been applied in the designing step to predict the CV.It has been approved by practical modeling and validation that the model could fit preferably an accrual CV value,and provide a method of quantitative predicting analysis for textile manufacturers to design cotton yarn's quality.
基金jointly supported by the China Postdoctoral Science Foundation(No.2018M630028)the National Natural Science Foundation of China(Nos.41274094,40821062 and 40872133).
文摘Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.
文摘The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineering needs. Using Odeh and Owen's computational method and Brent's algorithm, the tables for the r-upper exact classical limits of coefficient of variation for normal distribution are calculated for the different confidence coefficient y, the sample size n=1(1)30,40,60,120, the sample coefficient of variation c=0.01(0.01)0.20. It is shown that if n<8,c<0.20, then the V -upper exact classical limits cu for c are slightly higher than the exact fiducial limits cu,F for c if. n>8, c<0.02,then cu-cu,f<5x10-6
文摘Accurate estimation of Weibull parameters is an important issue for the characterization of the strength variability of brittle ceramics with Weibull statistics.In this paper,a simple method was established for the determination of the Weibull parameters,Weibull modulus m and scale parameter σ0,based on Monte Carlo simulation.It was shown that an unbiased estimation for Weibull modulus can be yielded directly from the coefficient of variation of the considered strength sample.Furthermore,using the yielded Weibull estimator and the mean value of the strength in the considered sample,the scale parameter σ0 can also be estimated accurately.
文摘To identify the root causes of heavy metal contamination in soils as well as prevent and control such contamination from its sources,this study explored the accumulation patterns and ecological risks of heavy metals like Cd and Pb in solid waste in mining areas and across the water body,sediment,soil and agricultural product ecosystem surrounding the mining areas.Focusing on the residual solid waste samples in lead-zinc deposits in a certain area of Guizhou Province,along with samples of topsoils,irrigation water,river sediments,and crops from surrounding areas.This study analyzed the distributions of eight heavy metals,i.e.,Cd,As,Cr,Hg,Pb,Zn,Cu,and Ni,in the samples through field surveys and sample tests.Furthermore,this study assessed the contamination levels and ecological risks of heavy metals in soils,sediments,and agricultural products using methods such as the single-factor index,Nemerow composite index,and potential ecological risk assessment.The results indicate that heavy metals in the solid waste samples all exhibited concentrations exceeding their risk screening values,with 60%greater than their risk intervention values.The soils and sediments demonstrate slight and moderate comprehensive ecological risks of heavy metals.The single-factor potential ecological risks of heavy metals in both the soil and sediment samples decreased in the order of Hg,Cd,Pb,As,Cu,Zn,Cr,and Ni,suggesting the same sources of heavy metals in the soils and sediments.Most of the agricultural product samples exhibited over-limit concentrations of heavy metals dominated by Cd,Pb,Ni,and Cr,excluding Hg and As.The agricultural product assessment using the Nemerow composite index reveals that 35%of the agricultural product samples reached the heavy metal contamination level,implying that the agricultural products from farmland around the solid waste dumps have been contaminated with heavy metals.The eight heavy metals in the soil,sediment,and agricultural product samples manifested high coefficients of variation(CVs),indicating pronounced spatial variability.This suggests that their concentrations in soils,sediments,and agricultural products are significantly influenced by human mining activities.Additionally,the agricultural products exhibit strong transport and accumulation capacities for Cd,Cu,and Zn.
基金the European Union and Greek National Funds through the Operational Program Competitiveness,Entrepreneurship and Innovation,under the Call Research-Create-Innovate(Project Code:T1EDK-00739).
文摘Plant-to-plant variability is a crop stability component.The objective of this study in maize(Zea mays L.)was to test the validity of the theoretical background of the hypothesis that the coefficient of variation(CV)for grain yield per plant and mean yield are connected exponentially,following the Taylor’s Power Law(TPL)Model.Field experimentation was conducted across two sites,two seasons,and two planting densities.Densities were the main plots,corresponding to the typical practice of 8.89 plants m–2(TCD)and the low-input optimal of 5.33 plants m–2(LCD),while hybrids were the subplots.Data from 26 subplots in the first site averaged CV values of 22.6%at the TCD and 21.9%at the LCD,and mean yields of 19.1 and 13.9 t ha–1,respectively,following the TPL Model.The same was true for the second site,with average CVs and means of 41.5%and 14.3 t ha–1 at the TCD and 36.8%and 11.5 t ha–1 at the LCD.A test was performed on the simple correlation between the logarithms of variances and their respective means to investigate whether there is a systematic variance dependence on mean,thus questioning the reliability of TPL.The validity of TPL was verified in the first site.Nevertheless,there was a systematic dependence of yield variance on mean yield in the second site,implying that the CV-yield correlation might be not biologically meaningful.Conversion of the variance to remove its dependence on the mean did not validate the CV-yield negative relationship,meaning that caution is needed when interpreting the CV as a stability index for intra-crop variation.Whether the determinant factor of invalidity of TPL was the extensive intra-crop variation in the lower yielding second site can be assessed in future research.
基金wasfinancially aided by the National Natural Science Foundation of China(52276122).
文摘The proper selection of a relevant mixer generally requires an effective assessment of several models against theapplication requirements. This is a complex task, as traditional evaluation methods generally focus only on a single aspect of performance, such as pressure loss, mixing characteristics, or heat transfer. This study assesses aurea-based selective catalytic reduction (SCR) system installed on a ship, where the installation space is limitedand the distance between the urea aqueous solution injection position and the reactor is low;therefore, the staticmixer installed in this pipeline has special performance requirements. In particular, four evaluation indices areused in this study: The B value, C value, pressure loss correction factor (Z′), and the ratio of the required distanceto the equivalent diameter of the pipe (LV/D) when the velocity field after the mixer attains uniformity. Six typesof static mixers were simulated with varying concentrations, flow speeds, and positions. A fuzzy comprehensiveevaluation method was introduced to evaluate and compare the related advantages and disadvantages. The resultsshowed that 1) mixing performance was related to the shape of the mixer and had no direct relationship with flowvelocity. 2) For the same mixer position, the lower the urea concentration, the greater the difficulty of evenly mixing the solution. 3) At a constant urea concentration, the mixing performance improved when the mixer was closer to the injection inlet. 4) The installation of a GK mixer in the SCR system of a 9L20C diesel engine was best.
文摘The lack of suitable varieties is a constraint to okra production in West Africa. This study aimed to assess the magnitude of morphological diversity of 260 accessions of okra (Abelmoschus esculentus L. Moench) in Mali. A total of 25 qualitative and quantitative traits, including plant height, number of branches, pod length, and pod yield, were measured under field conditions. Significant variation was observed for all agronomic traits (p 2 < 60), suggesting that these traits are largely controlled by genetic factors. The pod yield was affected by the incidence of diseases. Principal component analysis (PCA) revealed four distinct clusters, indicating a broad genetic base. These findings provide valuable insights for breeding programs targeting improved okra varieties with enhanced yield and resilience, contributing to sustainable agricultural development in Mali.
文摘The flow and mixing behavior of two miscible liquids has been studied in an innovative static mixer by using CFD,with Reynolds numbers ranging from 20 to 160.The performance of the new mixer is compared with those of Kenics,SMX,and Komax static mixers.The pressure drop ratio(Z-factor),coefficient of variation(CoV),and extensional efficiency(α)features have been used to evaluate power consumption,distributive mixing,and dispersive mixing performances,respectively,in all mixers.The model is firstly validated based on experimental data measured for the pressure drop ratio and the coefficient of variation.CFD results are consistent with measured data and those obtained by available correlations in the literature.The new mixer shows a superior mixing performance compared to the other mixers.
基金Project supported by the Hi-Tech Research and Development Program (863) of China(No.2002AA601013).
文摘Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone （ATE） of Taihu Lake were investigated, and the relations among N, P, ORP （oxidation reduction potential）, TOC, root system biomass and microorganism were studied. As a whole, significant declines in TN, NO3^--N, DON （dissolved organic nitrogen） and TP concentration in soil solution have occurred with increase of the depth, and reached their minima at 60 cm depth, except for NH4^＋-N, which increased with depth. The concentration of TP increased gradually from spring to winter in the topsoil, the maximum 0.08 mg/L presented in the winter while the minimum 0.03 mg/L in spring. In the deeper layer, the concentration value of TP fluctuated little. As for the NO3^--N, its seasonal variation was significant at 20 cm depth, its concentration increased gradually from spring to autumn, and decreased markedly in winter. Vertical and temporal distribution of DON is contrary to that of NO3^--N. The results also show that the variation of N and P in the percolate between adjacent layers is obviously different. The vertical variation ofTN, TP, NO3^--N, NH4^＋-N and DON is significant, of which the variation coefficient of NO3^--N along the depth reaches 100.23%, the highest; while the variation coefficient of DON is 41.14%, the smallest. The results of correlation analysis show that the concentration of nitrogen and phosphorus correlate significantly with TOC, ORP, root biomass and counts of nitrifying bacteria. Most nutrients altered much from 20 to 40 cm along the depth. However, DON changed more between 60 and 80 cm. Results show that soil of 0-60 cm depth is active rhizoplane, with strong capability to remove the nitrogen and phosphorus in ATE. It may suggest that there exists the optimum ecological efficiency in the depth of above 60 cm in reed wetland. This will be very significant for ecological restoration and reestablishment.
基金supported by the Ministry of Science and Technology of China (2006BAD09A01, 200905020)the National Natural Science Fundation of China (30771661the 111 Project of China (B08049)
文摘The exceptionally large individual growth variation has been previously recognized in several sea cucumber cohorts. However, there is a lack of information regarding the mechanism of such individual differences. In this study, the sea cucumber Apostichopusjaponicus （Selenka） was reared individually in order to eliminate possible effects of social interaction, stocking density, etc. The results showed that there were substantial differences in growth among the sea cucumber individuals during the 100-day experiment. The special growth rate of the sea cucumber individuals differed by up to three folds （from 0.40% to 1.01%）, and the coefficient of variation in body weight increased from 12.04% to 40.51%. The final wet body weight, food intake and food conversion efficiency for each sea cucumber were generally positively correlated with their initial wet body weight （P〈0.05）. Energy budget of the animals showed that the food energy spent on respiration was much greater （about four folds） but energy deposited for growth was much less for （initially） smaller than for larger A. japonicus. The present result implies that there are obvious genetic differences among the sea cucumber individuals, largely accounting for the individual growth variation of the cohort sea cucumber. These results will provide some basic data for promoting selective breeding and fanning of the sea cucumber.
基金by the National Natural Science Foundation of China(No.52174114)the State Key Laboratory of Hydroscience and Engineering of Tsinghua University(No.61010101218).
文摘Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77 field cases,5 quantitative indicators are selected to improve the accuracy of prediction models for slope stability.These indicators include slope angle,slope height,internal friction angle,cohesion and unit weight of rock and soil.Potential data aggregation in the prediction of slope stability is analyzed and visualized based on Six-dimension reduction methods,namely principal components analysis(PCA),Kernel PCA,factor analysis(FA),independent component analysis(ICA),non-negative matrix factorization(NMF)and t-SNE(stochastic neighbor embedding).Combined with classic machine learning methods,7 prediction models for slope stability are established and their reliabilities are examined by random cross validation.Besides,the significance of each indicator in the prediction of slope stability is discussed using the coefficient of variation method.The research results show that dimension reduction is unnecessary for the data processing of prediction models established in this paper of slope stability.Random forest(RF),support vector machine(SVM)and k-nearest neighbour(KNN)achieve the best prediction accuracy,which is higher than 90%.The decision tree(DT)has better accuracy which is 86%.The most important factor influencing slope stability is slope height,while unit weight of rock and soil is the least significant.RF and SVM models have the best accuracy and superiority in slope stability prediction.The results provide a new approach toward slope stability prediction in geotechnical engineering.
基金Project(31300343)supported by the National Natural Science Foundation of ChinaProject(Y20160023)supported by Open Science Research Fund of State Key Laboratory of Soil and Sustainable Agriculture,Institute of Soil Science,Chinese Academy of Sciences,China+1 种基金Project supported by Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),ChinaProject supported by Jiangsu Collaborative Innovation Center of Technology and Material of Water Treatment
文摘Functional traits, specifically leaf functional traits, are core-topics to explore importance to the invasion success of invasive plant species. This study aims to address the differences in leaf functional traits and their corresponding variability of the invasive tree staghorn sumac Rhus typhina L. with different invasion success, including lower and higher invasion success, in two climatic regions in North China, including a warm temperate region and a cold temperate region. No significant differences were found for leaf functional traits of staghorn sumac across different invasion success. However, the variability of leaf chlorophyll and nitrogen concentrations of staghorn sumac under higher invasion success were approximately 66.023% and 68.615% higher than those under lower invasion success, respectively. The leaf chlorophyll and nitrogen concentrations of staghorn sumac in the warm temperate region were approximately 18.432% and 16.337% higher than those in cold temperate region, respectively. The variability of specific leaf area of staghorn sumac in warm temperate region was approximately 59.802% higher than that in cold temperate region. Accordingly, leaf chlorophyll and N concentrations as well as specific leaf area of staghorn sumac and their corresponding variability may play an essential role in shaping ecological success of studied invader along a climatic gradient.
基金National Natural Science Foundations of China(Nos.41172236,41402243,and 40911120044)Basic Research Project of Jilin University,China(No.450060491448)
文摘Post-construction settlement has gained increasing attention because it frequently causes engineering problems. A combined model is a commonly used prediction model that overcomes the difficulty of a single model( i. e., cannot reflect various regulations of settlement at some stages or the entire process). In this study,the correlation coefficient,maximum error values,and other values were obtained according to the fitting and predicted results of a single model. The coefficient of variation was then introduced to determine the weight of each model forming the combination. The proposed model was used to fit and predict for settlement and overcome the issue of utilizing a single model while determining the weight. The fitting predictive effect was also analyzed using the settlement fitting precision results. The fitting precision of optimizing the combination model is high. The predicted data of the post-construction settlement are closer to the calculated value of the settlement monitoring data. Moreover,the proposed model has good practicability,does not require the interval data of settlement,and restricts the model number. Thus,this model can be applied in the engineering field.
文摘This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric parameter distributions is proposed in this work.The proposed method can quickly and simply determine the size effects and representative elementary sizes.Specifically,geometric parameter distributions,including fracture frequency,size and orientation,are generated on the basis of the Bernoulli trial and Monte Carlo simulation.The distributions are assessed using the coefficient of variation(CV),and the acceptable variations for CV(5%,10%and 20%)are used to determine representative elementary sizes.Generally,the representative element of rock masses is the representative elementary volume(REV).The present study extends the representative element to other dimensions,i.e.representative elementary length(REL)and representative elementary area(REA)for one and two dimensions,respectively.REL and REA are useful in studying the size effects of one-(1D)and twodimensional(2D)characteristics of rock masses.The relationships among multi-dimensional representative elementary sizes are established.The representative elementary sizes reduce with the increase in the dimensions,and REA and REV can be deduced by REL.Therefore,the proposed method can quickly and simply determine REL and further estimate REA and REV,which considerably improves the efficiency of rock mass analysis.
基金the grant names“ProfessionalDevelopment Research University Grant”(“UTM Vot No.05E69”and“TDR grant Vot No.05G27”).
文摘Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The random movement of mobile terminals in the indoor environment is a challenge in the VLC system.The model of optical attocells has a critical role in the uniform distribution and the quality of communication links in terms of received power and signal-to-noise ratio(SNR).As such,the optical attocells positions were optimized in this study with a developed try and error(TE)algorithm.The optimized optical attocells were examined and compared with previous models.This novel approach had successfully increased minimum received power from−1.29 to−0.225 dBm,along with enhanced SNR performance by 2.06 dB.The bit error rate(BER)was reduced to 4.42×10−8 and 6.63×10−14 by utilizing OOK-NRZ and BPSK modulation techniques,respectively.The optimized attocells positions displayed better uniform distribution,as both received power and SNR performances improved by 0.45 and 0.026,respectively.As the results of the proposed model are optimal,it is suitable for standard office and room model applications.
文摘Since the 17th National Congress of the Communist Party of China, ecological civilization has been the key construction goal in China, which has a profound impact on the process of urbanization. In recent years, with the rapid development of urbanization and unreasonable land development and utilization, the ecological environment has deteriorated sharply, and the stability of ecological environment has always been a difficult problem in the process of regional development. The spatial division of urban ecological function can be divided into different types of spatial utilization according to the fragile state of ecological environment, which not only guarantees urban construction but also maintains the ecological environment health, and has great economic benefits and ecological value in formulating regional development strategies and ecological protection. In this paper, from four perspectives of “land, water, human and forest”, eight factors affecting ecological sensitivity were selected, and GIS spatial superposition method was used to conduct qualitative and quantitative analysis on the ecological sensitivity of Baoji City, and the evaluation results of single factor ecological sensitivity and comprehensive ecological sensitivity were obtained. The areas with different ecological sensitivity are divided into extremely sensitive areas, highly sensitive areas, moderately sensitive areas, slightly sensitive areas and non-sensitive areas. The research shows that the proportion of extreme, high, moderate, mild and insensitive areas in Baoji City is 7.32%, 10.57%, 22.25%, 42.91% and 16.95% respectively. Finally, the areas with different sensitivity grades are identified as three types of urban ecological function areas: ecological conservation area, ecological coordinated moderate utilization area and ecological suitable construction area, so as to provide scientific theoretical basis for urban construction and land use optimization in Baoji City.
