In spite of their extraordinary performance, AlGaN/GaN high electron mobility transistors （HEMTs） still lack solid reliability. Devices under accelerated DC stress tests （off-state, VDS = 0 state, and on-state step...In spite of their extraordinary performance, AlGaN/GaN high electron mobility transistors （HEMTs） still lack solid reliability. Devices under accelerated DC stress tests （off-state, VDS = 0 state, and on-state step-stress） are investigated to help us identify the degradation mechanisms of the AlGaN/GaN HEMTs. All our findings are consistent with the degradation mechanism based on crystallographic-defect formation due to the inverse piezoelectric effects in Ref. [1] （Joh J and del Alamo J A 2006 IEEE IDEM Tech. Digest p. 415）. However, under the on-state condition, the devices are suffering from both inverse piezoelectric effects and hot electron effects, and so to improve the reliability of the devices both effects should be taken into consideration.展开更多
A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many record...A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many recordings disagree with theoretic calculation using static dislocation model. Secondly, abnormally large strain steps are ob-served at quite a few stations in the tectonically active east-northern China, while in the relatively inactive east-southern China no obvious steps are recorded. It is inferred that seismic stress triggering may significantly affect remote seismic strain field. In other words, whether remote faulting be seismically triggered or not may de-termine the pattern of local seismic strain changes. Further comparison study results of March 11, 1999 Zhangbei earthquake and November 1, 1999 Datong earthquake show that the specific pattern of seismic zones has obvious influence on seismic strain changes in the region. This supports the idea that observed abnormal strain steps might be produced by coseismicly stress-triggered local faulting.展开更多
Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed tha...Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality criteria.Finally, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.展开更多
Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes th...Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes the data processing mathematical model and storage life forecasting m ethod.At last,according to the result of the stepping stress acceleration lif e test of the detonator,this paper forecasts the reliable storage life of the detonator under the normal stress level.展开更多
Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the t...Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the theory of dis location, one can invert the triggered fault slips with such data if he/she has a well understanding about the local faults. Genetic algorithm can be applied to significantly raise the efficiency of searching a best solution among all possibilities in this kind of inversion. A testifying check of the program and analyses of each parameter＇s influence may further enhance the reliability of inversion results. Taking complexity of geological structure into account, the inversion results should be regarded as the predominant property or a comprehensive effect of triggered local faults＇ activities. As an attempt, we inverted the assumingly active faults＇ slips triggered by the Ms=8.1 Kunlun Mountain earthquake over Beijing area.展开更多
To analyze the bending properties of GCr15 steel guide rail based on the elastic-plastic theory, the novel bending loading method consisting of multi-step loading and corresponding unloading was applied in three speci...To analyze the bending properties of GCr15 steel guide rail based on the elastic-plastic theory, the novel bending loading method consisting of multi-step loading and corresponding unloading was applied in three specimens with different cross section shape and different heat treatment condition. According to the experimental results, using numerical calculation software program and the numerical simulation with finite element analysis （FEA）, the relationships among the maximal load and displacement on cross section shape with each step bend loading, the loading stroke with the heat treatment condition, and the loading stroke with cross section shape were gained, and also those curves were discussed qualitatively. Finally, the contrast results between the numerical simulation and experiment were carried out to study the influence about the multi-step loading on specimen. It is put forward that enlightenment for the straightening stroke in the precision linear guide rail manufacture process.展开更多
Four weeks of uncertain stress was used to establish an animal model of chronic stress. Basic fibroblast growth factor was injected daily for 15 days following stress induction. Cell morphology in the hippocampal CA3 ...Four weeks of uncertain stress was used to establish an animal model of chronic stress. Basic fibroblast growth factor was injected daily for 15 days following stress induction. Cell morphology in the hippocampal CA3 region of chronic stress mice revealed cell damage. Nitric oxide content and calcium concentration were significantly increased in the hippocampus, and learning and memory functions were significantly decreased. After basic fibroblast growth factor intervention, Ca2~ overload was decreased and neuronal damage was relieved in hippocampal neurons, which improved learning and memory functions in chronic stress mice. Latency was prolonged and the number of errors was decreased in a passive avoidance test.展开更多
An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency （RF） micro electro-mechanical system （MEMS） switch is developed based on the Euler-Bernoulli beam an...An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency （RF） micro electro-mechanical system （MEMS） switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.展开更多
基金Project supported by the National Basic Research Program of China (Grant No. 2011CBA00600)the National Natural Science Foundation of China (Grant No. 61106106)the Fundamental Research Funds for the Central Universities (Grant No. K50510250006)
文摘In spite of their extraordinary performance, AlGaN/GaN high electron mobility transistors （HEMTs） still lack solid reliability. Devices under accelerated DC stress tests （off-state, VDS = 0 state, and on-state step-stress） are investigated to help us identify the degradation mechanisms of the AlGaN/GaN HEMTs. All our findings are consistent with the degradation mechanism based on crystallographic-defect formation due to the inverse piezoelectric effects in Ref. [1] （Joh J and del Alamo J A 2006 IEEE IDEM Tech. Digest p. 415）. However, under the on-state condition, the devices are suffering from both inverse piezoelectric effects and hot electron effects, and so to improve the reliability of the devices both effects should be taken into consideration.
基金National Natural Science Foundation of China (40374011), Joint Seismological Foundation of China (1040037) and Investigating Active Faults in Major Cities Program.
文摘A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many recordings disagree with theoretic calculation using static dislocation model. Secondly, abnormally large strain steps are ob-served at quite a few stations in the tectonically active east-northern China, while in the relatively inactive east-southern China no obvious steps are recorded. It is inferred that seismic stress triggering may significantly affect remote seismic strain field. In other words, whether remote faulting be seismically triggered or not may de-termine the pattern of local seismic strain changes. Further comparison study results of March 11, 1999 Zhangbei earthquake and November 1, 1999 Datong earthquake show that the specific pattern of seismic zones has obvious influence on seismic strain changes in the region. This supports the idea that observed abnormal strain steps might be produced by coseismicly stress-triggered local faulting.
基金supported by the National Natural Science Foundation of China(71401134 71571144+1 种基金 71171164)the Program of International Cooperation and Exchanges in Science and Technology Funded by Shaanxi Province(2016KW-033)
文摘Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality criteria.Finally, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.
文摘Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes the data processing mathematical model and storage life forecasting m ethod.At last,according to the result of the stepping stress acceleration lif e test of the detonator,this paper forecasts the reliable storage life of the detonator under the normal stress level.
基金National Natural Science Foundation of China (40374011) and Joint Seismological Science of China (1040037).
文摘Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the theory of dis location, one can invert the triggered fault slips with such data if he/she has a well understanding about the local faults. Genetic algorithm can be applied to significantly raise the efficiency of searching a best solution among all possibilities in this kind of inversion. A testifying check of the program and analyses of each parameter＇s influence may further enhance the reliability of inversion results. Taking complexity of geological structure into account, the inversion results should be regarded as the predominant property or a comprehensive effect of triggered local faults＇ activities. As an attempt, we inverted the assumingly active faults＇ slips triggered by the Ms=8.1 Kunlun Mountain earthquake over Beijing area.
基金Funded by the Open Research Foundation of State Key Lab of Digital Manufacturing Equipment & Technology in Huazhong University of Science & Technology (No. DMETKF2009016)the Hubei Province Science Founda-tion (No.2008CDB274)+1 种基金the Wuhan High-Tech Development Project Founda-tion (No.200812121559)the International Collaborative Research Funds of Chonbuk National University, 2008
文摘To analyze the bending properties of GCr15 steel guide rail based on the elastic-plastic theory, the novel bending loading method consisting of multi-step loading and corresponding unloading was applied in three specimens with different cross section shape and different heat treatment condition. According to the experimental results, using numerical calculation software program and the numerical simulation with finite element analysis （FEA）, the relationships among the maximal load and displacement on cross section shape with each step bend loading, the loading stroke with the heat treatment condition, and the loading stroke with cross section shape were gained, and also those curves were discussed qualitatively. Finally, the contrast results between the numerical simulation and experiment were carried out to study the influence about the multi-step loading on specimen. It is put forward that enlightenment for the straightening stroke in the precision linear guide rail manufacture process.
基金the "Eleventh Five-Year" Scientific and Technological Research Projects of the Education Department of Jilin Province, No. [2008]137
文摘Four weeks of uncertain stress was used to establish an animal model of chronic stress. Basic fibroblast growth factor was injected daily for 15 days following stress induction. Cell morphology in the hippocampal CA3 region of chronic stress mice revealed cell damage. Nitric oxide content and calcium concentration were significantly increased in the hippocampus, and learning and memory functions were significantly decreased. After basic fibroblast growth factor intervention, Ca2~ overload was decreased and neuronal damage was relieved in hippocampal neurons, which improved learning and memory functions in chronic stress mice. Latency was prolonged and the number of errors was decreased in a passive avoidance test.
基金supported by the National Natural Science Foundation of China(Nos.51505089 and61204116)the Opening Project of the Science and Technology on Reliability Physics and Application Technology of Electronic Component Laboratory(Nos.ZHD201207 and 9140C030605140C03015)the Pearl River S&T Nova Program of Guangzhou(No.2014J2200086)
文摘An approximate analytical model for calculating the pull-in voltage of a stepped cantilever-type radio frequency （RF） micro electro-mechanical system （MEMS） switch is developed based on the Euler-Bernoulli beam and a modified couple stress theory, and is validated by comparison with the finite element results. The sensitivity functions of the pull-in voltage to the designed parameters are derived based on the proposed model. The sensitivity investigation shows that the pull-in voltage sensitivities increase/decrease nonlinearly with the increases in the designed parameters. For the stepped cantilever beam, there exists a nonzero optimal dimensionless length ratio, where the pull-in voltage is insensitive. The optimal value of the dimensionless length ratio only depends on the dimensionless width ratio, and can be obtained by solving a nonlinear equation. The determination of the designed parameters is discussed, and some recommendations are made for the RF MEMS switch optimization.
