CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. There...CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs（AAG） is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System（FSMARS）, is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.展开更多
An algorithm for compensating the varying section contour within the extent of each layer thickness is proposed to improve the rapid prototyping part’s shape and size precision.
We present the solid model edit distance(SMED),a powerful and flexible paradigm for exploiting shape similarities amongst CAD models.It is designed to measure the magnitude of distortions between two CAD models in bou...We present the solid model edit distance(SMED),a powerful and flexible paradigm for exploiting shape similarities amongst CAD models.It is designed to measure the magnitude of distortions between two CAD models in boundary representation(B-rep).We give the formal definition by analogy with graph edit distance,one of the most popular graph matching methods.To avoid the expensive computational cost potentially caused by exact computation,an approximate procedure based on the alignment of local structure sets is provided in addition.In order to verify the flexibility,we make intensive investigations on three typical applications in manufacturing industry,and describe how our method can be adapted to meet the various requirements.Furthermore,a multilevel method is proposed to make further improvements of the presented algorithm on both effectiveness and efficiency,in which the models are hierarchically segmented into the configurations of features.Experiment results show that SMED serves as a reasonable measurement of shape similarity for CAD models,and the proposed approach provides remarkable performance on a real-world CAD model database.展开更多
Abstract： Hand drawings and two dimensional （2D） CAD drawings have been replaced by three dimensional （3D） CAD models in mechanical design, but some 2D drawings produced before are needed in the new design. Howev...Abstract： Hand drawings and two dimensional （2D） CAD drawings have been replaced by three dimensional （3D） CAD models in mechanical design, but some 2D drawings produced before are needed in the new design. However, the techniques and software packages for automatically converting 2D drawings into 3D-CAD models with high precision have not yet been developed due to the difficulties to verify the validity of the drawings, to decide the hidden lines and eoncavo-convex faces, and to represent free-form surfaces. In addition, it is very time consuming to manually convert a large number of 2D drawings into 3D CAD models. To address these problems, we propose an approach for converting 2D drawings into 3D-CAD models automatically.展开更多
A method to exchange digital CAD model construction history data using ISO10303 is presented. The primary intention of this research is to demonstrate the utility of ISO10303-108 in achieving parametric CAD model exch...A method to exchange digital CAD model construction history data using ISO10303 is presented. The primary intention of this research is to demonstrate the utility of ISO10303-108 in achieving parametric CAD model exchange between commercial CAD systems. ISO10303-108,still under development,has been used to represent geometric and dimensional constraints on the sketch profile. Schemas from Parts 42,50 of ISO 10303 are also used. ISO10303-42 is adopted to represent geometric and topological information and ISO10303-50 is used to represent the mathematical expression.展开更多
Excessive vibration of aircraft wings during flight is harmful and may cause propagation of existing cracks in the material, leading to catastrophic failures as a result of material fatigue. This study investigates th...Excessive vibration of aircraft wings during flight is harmful and may cause propagation of existing cracks in the material, leading to catastrophic failures as a result of material fatigue. This study investigates the variations of modal characteristics of aircraft wings with respect to changes in the structural configurations. We develop parametric Computer-Aided Design (CAD) models to capture new design intend on the aircraft wing architectures. Subsequent Finite Element Analysis (FEA) based vibration analysis is performed to study the effects of architecture changes on the wing’s natural frequencies and mode shapes. It is concluded that the spar placement and the number of ribs have significant influence on the wing’s natural vibration properties. Integrating CAD modelling and FEA vibration analysis enables designers to develop alternative wing architectures to implement design requirements in the preliminary design stage.展开更多
A model-exchange method based on feature between isomerous CAD systems is put forward in this paper.In this method,CAD model information is accessed at both feature and geometry levels and converted according to stand...A model-exchange method based on feature between isomerous CAD systems is put forward in this paper.In this method,CAD model information is accessed at both feature and geometry levels and converted according to standard feature opera- tion.The feature information including feature tree,dimensions and constraints,which will be lost in traditional data conver- sion,as well as geometry are converted completely from source CAD system to destination one.So the transferred model can be edit- ed through feature operation,which cannot be implemented by general model-exchange interface.展开更多
Objectives： The sails fabrication knew a significant development under the impulse of sailing races like the America＇s Cup and the Volvo around the World Race. These competitions require advanced technologies to inc...Objectives： The sails fabrication knew a significant development under the impulse of sailing races like the America＇s Cup and the Volvo around the World Race. These competitions require advanced technologies to increase performance of the sails. In the paper, Reverse Engineering （RE） acquisition, CAD （Computer Aided Design） reconstruction and FE （Finite Element） analysis are used in the design phase for a spinnaker in order to maximize the performance of the sail boat. Materials and Methods： The comparison, between the design data and the characteristics in the real conditions of use of the sail （constant wind pressure acting on the sail）, was carried out by the reconstruction of the three-dimensional CAD model of the spinnaker shape in full-scale, using a non contact Reverse Engineering technique, the photogrammetry and by a FE non linear static analysis. Results： The results of this study show a good correspondence between the design data and the characteristics in the real conditions of use of the sail. Significance： The described methodology is useful for sail makers. It can be successfully adopted to generate three-dimensional CAD-FE models of a sail starting from a very cheap and fast Reverse Engineering non-contact procedure.展开更多
In this paper,we introduce an innovative method for computer-aided design(CAD)segmentation by concatenating meshes and CAD models.Many previous CAD segmentation methods have achieved impressive performance using singl...In this paper,we introduce an innovative method for computer-aided design(CAD)segmentation by concatenating meshes and CAD models.Many previous CAD segmentation methods have achieved impressive performance using single representations,such as meshes,CAD,and point clouds.However,existing methods cannot effectively combine different three-dimensional model types for the direct conversion,alignment,and integrity maintenance of geometric and topological information.Hence,we propose an integration approach that combines the geometric accuracy of CAD data with the flexibility of mesh representations,as well as introduce a unique hybrid representation that combines CAD and mesh models to enhance segmentation accuracy.To combine these two model types,our hybrid system utilizes advanced-neural-network techniques to convert CAD models into mesh models.For complex CAD models,model segmentation is crucial for model retrieval and reuse.In partial retrieval,it aims to segment a complex CAD model into several simple components.The first component of our hybrid system involves advanced mesh-labeling algorithms that harness the digitization of CAD properties to mesh models.The second component integrates labelled face features for CAD segmentation by leveraging the abundant multisemantic information embedded in CAD models.This combination of mesh and CAD not only refines the accuracy of boundary delineation but also provides a comprehensive understanding of the underlying object semantics.This study uses the Fusion 360 Gallery dataset.Experimental results indicate that our hybrid method can segment these models with higher accuracy than other methods that use single representations.展开更多
Model classification is essential to the management and reuse of 3D CAD models.Manual model classification is laborious and error prone.At the same time,the automatic classification methods are scarce due to the intri...Model classification is essential to the management and reuse of 3D CAD models.Manual model classification is laborious and error prone.At the same time,the automatic classification methods are scarce due to the intrinsic complexity of 3D CAD models.In this paper,we propose an automatic 3D CAD model classification approach based on deep neural networks.According to prior knowledge of the CAD domain,features are selected and extracted from 3D CAD models first,and then preprocessed as high dimensional input vectors for category recognition.By analogy with the thinking process of engineers,a deep neural network classifier for 3D CAD models is constructed with the aid of deep learning techniques.To obtain an optimal solution,multiple strategies are appropriately chosen and applied in the training phase,which makes our classifier achieve better performance.We demonstrate the efficiency and effectiveness of our approach through experiments on 3D CAD model datasets.展开更多
The current computer-aided technologies in design and product development, the evolution of CAD modeling, and a framework of multi-volume CADmodeling system for heterogeneous object design and fabrication are presente...The current computer-aided technologies in design and product development, the evolution of CAD modeling, and a framework of multi-volume CADmodeling system for heterogeneous object design and fabrication are presented inthis paper. The multi-volume CAD modeling system is presented based on nonmanifold topological elements. Material identifications are defined as design attributes introduced along with geometric and topological information at the designstage. Extended Euler operation and reasoning Boolean operations for merging andextraction are executed according to the associated material identifications in thedeveloped multi-volume modeling system for heterogeneous object. An applicationexample and a pseudo-processing algorithm for prototyping of heterogeneous structure through solid free-form fabrication are also described.展开更多
Cloud manufacturing is one of the three key technologies that enable intelligent manufacturing.This paper presents a novel attribute-based encryption(ABE)approach for computer-aided design(CAD)assembly models to effec...Cloud manufacturing is one of the three key technologies that enable intelligent manufacturing.This paper presents a novel attribute-based encryption(ABE)approach for computer-aided design(CAD)assembly models to effectively support hierarchical access control,integrity verification,and deformation protection for co-design scenarios in cloud manufacturing.An assembly hierarchy access tree(AHAT)is designed as the hierarchical access structure.Attribute-related ciphertext elements,which are contained in an assembly ciphertext(ACT)file,are adapted for content keys decryption instead of CAD component files.We modify the original Merkle tree(MT)and reconstruct an assembly MT.The proposed ABE framework has the ability to combine the deformation protection method with a content privacy of CAD models.The proposed encryption scheme is demonstrated to be secure under the standard assumption.Experimental simulation on typical CAD assembly models demonstrates that the proposed approach is feasible in applications.展开更多
This paper reports that a 4H-SiC MESFET （Metal Semiconductor Field Effect Transistor） large signal drain current model based on physical expressions has been developed to be used in CAD tools. The form of drain curr...This paper reports that a 4H-SiC MESFET （Metal Semiconductor Field Effect Transistor） large signal drain current model based on physical expressions has been developed to be used in CAD tools. The form of drain current model is based on semi-empirical MESFET model, and all parameters in this model are determined by physical parameters of 4H-SiC MESFET. The verification of the present model embedded in CAD tools is made, which shows a good agreement with measured data of large signal DC I-V characteristics, PAE （power added efficiency）, output power and gain.展开更多
This paper describes multi view modeling and data model transformation for the modeling. We have proposed a reference model of CAD system generation, which can be applied to various domain specific languages. Howeve...This paper describes multi view modeling and data model transformation for the modeling. We have proposed a reference model of CAD system generation, which can be applied to various domain specific languages. However, the current CAD system generation cannot integrate data of multiple domains. Generally each domain has its own view of products. For example, in the domain of architectural structure, designers extract the necessary data from the data in architecture design. Domain experts translate one view into another view beyond domains using their own brains.The multi view modeling is a way to integrate product data of multiple domains, and make it possible to translate views among various domains by computers.展开更多
Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination ...Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.展开更多
基金Supported by National Natural Science Foundation of China (Grant No.51175287)National Science and Technology Major Project of China (Grant No.2011ZX02403)
文摘CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs（AAG） is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System（FSMARS）, is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.
基金Supported by College Science Foundation of Jiangsu(07KJB460113)
文摘An algorithm for compensating the varying section contour within the extent of each layer thickness is proposed to improve the rapid prototyping part’s shape and size precision.
基金Supported by National Science Foundation of China(61373071)
文摘We present the solid model edit distance(SMED),a powerful and flexible paradigm for exploiting shape similarities amongst CAD models.It is designed to measure the magnitude of distortions between two CAD models in boundary representation(B-rep).We give the formal definition by analogy with graph edit distance,one of the most popular graph matching methods.To avoid the expensive computational cost potentially caused by exact computation,an approximate procedure based on the alignment of local structure sets is provided in addition.In order to verify the flexibility,we make intensive investigations on three typical applications in manufacturing industry,and describe how our method can be adapted to meet the various requirements.Furthermore,a multilevel method is proposed to make further improvements of the presented algorithm on both effectiveness and efficiency,in which the models are hierarchically segmented into the configurations of features.Experiment results show that SMED serves as a reasonable measurement of shape similarity for CAD models,and the proposed approach provides remarkable performance on a real-world CAD model database.
文摘Abstract： Hand drawings and two dimensional （2D） CAD drawings have been replaced by three dimensional （3D） CAD models in mechanical design, but some 2D drawings produced before are needed in the new design. However, the techniques and software packages for automatically converting 2D drawings into 3D-CAD models with high precision have not yet been developed due to the difficulties to verify the validity of the drawings, to decide the hidden lines and eoncavo-convex faces, and to represent free-form surfaces. In addition, it is very time consuming to manually convert a large number of 2D drawings into 3D CAD models. To address these problems, we propose an approach for converting 2D drawings into 3D-CAD models automatically.
文摘A method to exchange digital CAD model construction history data using ISO10303 is presented. The primary intention of this research is to demonstrate the utility of ISO10303-108 in achieving parametric CAD model exchange between commercial CAD systems. ISO10303-108,still under development,has been used to represent geometric and dimensional constraints on the sketch profile. Schemas from Parts 42,50 of ISO 10303 are also used. ISO10303-42 is adopted to represent geometric and topological information and ISO10303-50 is used to represent the mathematical expression.
文摘Excessive vibration of aircraft wings during flight is harmful and may cause propagation of existing cracks in the material, leading to catastrophic failures as a result of material fatigue. This study investigates the variations of modal characteristics of aircraft wings with respect to changes in the structural configurations. We develop parametric Computer-Aided Design (CAD) models to capture new design intend on the aircraft wing architectures. Subsequent Finite Element Analysis (FEA) based vibration analysis is performed to study the effects of architecture changes on the wing’s natural frequencies and mode shapes. It is concluded that the spar placement and the number of ribs have significant influence on the wing’s natural vibration properties. Integrating CAD modelling and FEA vibration analysis enables designers to develop alternative wing architectures to implement design requirements in the preliminary design stage.
基金Supported by Science & Technology Sponsoring Project of Ministry of Education(105161)
文摘A model-exchange method based on feature between isomerous CAD systems is put forward in this paper.In this method,CAD model information is accessed at both feature and geometry levels and converted according to standard feature opera- tion.The feature information including feature tree,dimensions and constraints,which will be lost in traditional data conver- sion,as well as geometry are converted completely from source CAD system to destination one.So the transferred model can be edit- ed through feature operation,which cannot be implemented by general model-exchange interface.
文摘Objectives： The sails fabrication knew a significant development under the impulse of sailing races like the America＇s Cup and the Volvo around the World Race. These competitions require advanced technologies to increase performance of the sails. In the paper, Reverse Engineering （RE） acquisition, CAD （Computer Aided Design） reconstruction and FE （Finite Element） analysis are used in the design phase for a spinnaker in order to maximize the performance of the sail boat. Materials and Methods： The comparison, between the design data and the characteristics in the real conditions of use of the sail （constant wind pressure acting on the sail）, was carried out by the reconstruction of the three-dimensional CAD model of the spinnaker shape in full-scale, using a non contact Reverse Engineering technique, the photogrammetry and by a FE non linear static analysis. Results： The results of this study show a good correspondence between the design data and the characteristics in the real conditions of use of the sail. Significance： The described methodology is useful for sail makers. It can be successfully adopted to generate three-dimensional CAD-FE models of a sail starting from a very cheap and fast Reverse Engineering non-contact procedure.
基金Supported by the National Key Research and Development Program of China(2024YFB3311703)National Natural Science Foundation of China(61932003)Beijing Science and Technology Plan Project(Z221100006322003).
文摘In this paper,we introduce an innovative method for computer-aided design(CAD)segmentation by concatenating meshes and CAD models.Many previous CAD segmentation methods have achieved impressive performance using single representations,such as meshes,CAD,and point clouds.However,existing methods cannot effectively combine different three-dimensional model types for the direct conversion,alignment,and integrity maintenance of geometric and topological information.Hence,we propose an integration approach that combines the geometric accuracy of CAD data with the flexibility of mesh representations,as well as introduce a unique hybrid representation that combines CAD and mesh models to enhance segmentation accuracy.To combine these two model types,our hybrid system utilizes advanced-neural-network techniques to convert CAD models into mesh models.For complex CAD models,model segmentation is crucial for model retrieval and reuse.In partial retrieval,it aims to segment a complex CAD model into several simple components.The first component of our hybrid system involves advanced mesh-labeling algorithms that harness the digitization of CAD properties to mesh models.The second component integrates labelled face features for CAD segmentation by leveraging the abundant multisemantic information embedded in CAD models.This combination of mesh and CAD not only refines the accuracy of boundary delineation but also provides a comprehensive understanding of the underlying object semantics.This study uses the Fusion 360 Gallery dataset.Experimental results indicate that our hybrid method can segment these models with higher accuracy than other methods that use single representations.
基金Project supported by the National Natural Science Foundation of China(Nos.61163016 and 61173125)
文摘Model classification is essential to the management and reuse of 3D CAD models.Manual model classification is laborious and error prone.At the same time,the automatic classification methods are scarce due to the intrinsic complexity of 3D CAD models.In this paper,we propose an automatic 3D CAD model classification approach based on deep neural networks.According to prior knowledge of the CAD domain,features are selected and extracted from 3D CAD models first,and then preprocessed as high dimensional input vectors for category recognition.By analogy with the thinking process of engineers,a deep neural network classifier for 3D CAD models is constructed with the aid of deep learning techniques.To obtain an optimal solution,multiple strategies are appropriately chosen and applied in the training phase,which makes our classifier achieve better performance.We demonstrate the efficiency and effectiveness of our approach through experiments on 3D CAD model datasets.
文摘The current computer-aided technologies in design and product development, the evolution of CAD modeling, and a framework of multi-volume CADmodeling system for heterogeneous object design and fabrication are presented inthis paper. The multi-volume CAD modeling system is presented based on nonmanifold topological elements. Material identifications are defined as design attributes introduced along with geometric and topological information at the designstage. Extended Euler operation and reasoning Boolean operations for merging andextraction are executed according to the associated material identifications in thedeveloped multi-volume modeling system for heterogeneous object. An applicationexample and a pseudo-processing algorithm for prototyping of heterogeneous structure through solid free-form fabrication are also described.
基金supported by the National Natural Science Foundation of China(62072348)the Science and Technology Major Project of Hubei Province(Next-Generation AI Technologies,2019AEA170).
文摘Cloud manufacturing is one of the three key technologies that enable intelligent manufacturing.This paper presents a novel attribute-based encryption(ABE)approach for computer-aided design(CAD)assembly models to effectively support hierarchical access control,integrity verification,and deformation protection for co-design scenarios in cloud manufacturing.An assembly hierarchy access tree(AHAT)is designed as the hierarchical access structure.Attribute-related ciphertext elements,which are contained in an assembly ciphertext(ACT)file,are adapted for content keys decryption instead of CAD component files.We modify the original Merkle tree(MT)and reconstruct an assembly MT.The proposed ABE framework has the ability to combine the deformation protection method with a content privacy of CAD models.The proposed encryption scheme is demonstrated to be secure under the standard assumption.Experimental simulation on typical CAD assembly models demonstrates that the proposed approach is feasible in applications.
文摘This paper reports that a 4H-SiC MESFET （Metal Semiconductor Field Effect Transistor） large signal drain current model based on physical expressions has been developed to be used in CAD tools. The form of drain current model is based on semi-empirical MESFET model, and all parameters in this model are determined by physical parameters of 4H-SiC MESFET. The verification of the present model embedded in CAD tools is made, which shows a good agreement with measured data of large signal DC I-V characteristics, PAE （power added efficiency）, output power and gain.
文摘This paper describes multi view modeling and data model transformation for the modeling. We have proposed a reference model of CAD system generation, which can be applied to various domain specific languages. However, the current CAD system generation cannot integrate data of multiple domains. Generally each domain has its own view of products. For example, in the domain of architectural structure, designers extract the necessary data from the data in architecture design. Domain experts translate one view into another view beyond domains using their own brains.The multi view modeling is a way to integrate product data of multiple domains, and make it possible to translate views among various domains by computers.
文摘Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.
