Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO)...Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.展开更多
In this paper,the effects of four sorts of silica with the particle size range of 4～10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can ...In this paper,the effects of four sorts of silica with the particle size range of 4～10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can provide the coated paper with higher density and contrast, better definition and good printing performance.展开更多
Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and posse...Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.展开更多
Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching...Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching model based on two step learning is established by finding a linear model by learning pure color data first and then a nonlinear modification model by learning mixed color data. Nonlinear multiple regression is used to fit the parameters of the modification model. Nonlinear modification function is discovered by BACON system by learning mixture data. Experiment results indicate that nonlinear color conversion by two step learning can further improve the accuracy when it is used for straightforward conversion from RGB to CMYK. An improved separation model based on GCR concept is proposed to solve the problem of gray balance and it can be used for three to four color conversion as well. The method proposed has better learning ability and faster printing speed than other historical approaches when it is applied to four color ink jet printing.展开更多
A quaternary ammonium compound containing amino acid residue was synthesized by Converting 3-chloro-2-hydroxy- propyalkyldimethylammonium chlorides into its epoxide derivatives, then attaching an amino acid to the epo...A quaternary ammonium compound containing amino acid residue was synthesized by Converting 3-chloro-2-hydroxy- propyalkyldimethylammonium chlorides into its epoxide derivatives, then attaching an amino acid to the epoxide derivatives synthesized a quaternary ammonium compound containing amino acid residue. Modified dyes were prepared by the ionotropy of anionic dyes with the quaternary ammonium compound containing amino acid residue. It was discovered that the modified dyes exhibited an excellent pH controllable solubility. These modified dyes have good water solubility at pH> 8.0, but they were water insoluble at pH < 6.5. On the printing paper, modified dyes in water-based ink-jet print ink could convert to water insoluble form and give prints excellent water fastness.展开更多
Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and hi...Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.展开更多
In order to study the preferred skin color for printing images,two CMYK images from ISO 400 and one from iStock,including five skin color images of East Asian females was selected in this study.The images were adjuste...In order to study the preferred skin color for printing images,two CMYK images from ISO 400 and one from iStock,including five skin color images of East Asian females was selected in this study.The images were adjusted with the CMYK printing ink volume variation of the single,double and triple channels in the given 280%total ink limit conditions.A larger number of color vision normal observers were organized to carry out the color preference evaluation experiment,and the selected preferred skin colors were analyzed.The distribution range of the chromaticity values for skin color images were obtained and the results indicated that there are three regions for printing skin color preferences,and the observers have a memory preference for brighter,fairer skin colors in young female and a reddish skin colors in girl,which can provide the guidance for color adjustment of printed skin color images.展开更多
As a novel 2D material,Ti_(3)C_(2)T_(x)-MXene has become a major area of interest in the field of microwave absorption(MA).However,the MA effect of common Ti_(3)C_(2)T_(x)-MXene is not prominent and often requires com...As a novel 2D material,Ti_(3)C_(2)T_(x)-MXene has become a major area of interest in the field of microwave absorption(MA).However,the MA effect of common Ti_(3)C_(2)T_(x)-MXene is not prominent and often requires complex processes or combinations of other ma-terials to achieve enhanced performance.In this context,a kind of gradient woodpile structure using common Ti_(3)C_(2)T_(x)-MXene as MA ma-terial was designed and manufactured through direct ink writing(DIW)3D printing.The minimum reflection loss(RL_(min))of the Ti_(3)C_(2)T_(x)-MXene-based gradient woodpile structures with a thickness of less than 3 mm can reach-70 dB,showing considerable improve-ment compared with that of a completely filled structure.In addition,the effective absorption bandwidth(EAB)reaches 7.73 GHz.This study demonstrates that a Ti_(3)C_(2)T_(x)-MXene material with excellent MA performance and tunable frequency band can be successfully fab-ricated with a macroscopic structural design and through DIW 3D printing without complex material hybridization and modification,of-fering broad application prospects by reducing electromagnetic wave radiation and interference.展开更多
As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands...As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands as a landmark in this setting,by promising the precise integration of biomaterials,cells,and bioactive molecules,thus opening up a novel avenue for tissue/organ regeneration.Curated by the editorial board of Bio-Design and Manufacturing,this review brings together a cohort of leading young scientists in China to dissect the core functionalities and evolutionary trajectory of 3D bioprinting,by elucidating the intricate challenges encountered in the manufacturing of transplantable organs.We further delve into the translational pathway from scientific research to clinical application,emphasizing the imperativeness of establishing a regulatory framework and rigorously enforcing quality-control measures.Finally,this review outlines the strategic landscape and innovative achievements of China in this field and provides a comprehensive roadmap for researchers worldwide to propel this field collectively to even greater heights.展开更多
With organ transplantation facing many dilemmas,tissue and organ regeneration as an alternative has bright prospects.In regenerative medicine,Three-dimensional(3D)printing technology and stem cells has been widely app...With organ transplantation facing many dilemmas,tissue and organ regeneration as an alternative has bright prospects.In regenerative medicine,Three-dimensional(3D)printing technology and stem cells has been widely applied to the treatment of diseases related to tissue or organ replacement in dentistry,respectively.However,there are very few studies on the combination of the two,and even fewer clinical studies have been reported in dentistry.In this review,the current oral tissue engineering in vivo and in vitro based on 3D printing and stem cell technology will be summarized,and the discussion on the development prospects of this research direction will be given.Besides,the working principles and advantages&disadvantages of several types of 3D printers,as well as the mechanism of stem cells in tissue engineering will be elucidated.This review provides clinicians and researchers with the current state of research and trends in the combination of stem cells and 3D printing technology to treat oral-related diseases.In the future,3D bioprinters are poised for ongoing innovation with the advancement of relevant technologies,catalyzing an increase in clinical studies focused on treating oral diseases using stem cells and 3D scaffolds.Consequently,these developments will further advance the field of oral tissue engineering.展开更多
Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing ...Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.展开更多
3D printing stands at the forefront of transforming space exploration,offering unprecedented on-demand and rapid manufacturing capabilities.It adeptly addresses challenges such as mass reduction,intricate component fa...3D printing stands at the forefront of transforming space exploration,offering unprecedented on-demand and rapid manufacturing capabilities.It adeptly addresses challenges such as mass reduction,intricate component fabrication,and resource constraints.Despite the obstacles posed by microgravity and extreme environments,continual advancements underscore the pivotal role of 3D printing in aerospace science.Beyond its primary function of producing space structures,3D printing contributes significantly to progress in electronics,biomedicine,and resource optimization.This perspective delves into the technological advantages,environmental challenges,development status,and opportunities of 3D printing in space.Envisioning its crucial impact,we anticipate that 3D printing will unlock innovative solutions,reshape manufacturing practices,and foster self-sufficiency in future space endeavors.展开更多
Two-photon polymerization(TPP)is a cutting-edge micro/nanoscale three-dimensional(3D)printing technology based on the principle of two-photon absorption.TPP surpasses the diffraction limit in achieving feature sizes a...Two-photon polymerization(TPP)is a cutting-edge micro/nanoscale three-dimensional(3D)printing technology based on the principle of two-photon absorption.TPP surpasses the diffraction limit in achieving feature sizes and excels in fabricating intricate 3D micro/nanostructures with exceptional resolution.The concept of 4D entails the fabrication of structures utilizing smart materials capable of undergoing shape,property,or functional changes in response to external stimuli over time.The integration of TPP and 4D printing introduces the possibility of producing responsive structures with micro/nanoscale accuracy,thereby enhancing the capabilities and potential applications of both technologies.This paper comprehensively reviews TPP-based 4D printing technology and its diverse applications.First,the working principles of TPP and its recent advancements are introduced.Second,the optional4D printing materials suitable for fabrication with TPP are discussed.Finally,this review paper highlights several noteworthy applications of TPP-based 4D printing,including domains such as biomedical microrobots,bioinspired microactuators,autonomous mobile microrobots,transformable devices and robots,as well as anti-counterfeiting microdevices.In conclusion,this paper provides valuable insights into the current status and future prospects of TPP-based4D printing technology,thereby serving as a guide for researchers and practitioners.展开更多
As an accurate 2D/3D fabrication tool,inkjet printing technology has great potential in preparation of micro electronic devices.The morphology of droplets produced by the inkjet printer has a great impact on the accur...As an accurate 2D/3D fabrication tool,inkjet printing technology has great potential in preparation of micro electronic devices.The morphology of droplets produced by the inkjet printer has a great impact on the accuracy of deposition.In this study,the drop-on-demand(DoD)inkjet simulation model was established,and the accuracy of the simulation model was verified by corresponding experiments.The simulation result shows that the velocity of the droplet front and tail,as well as the time to disconnect from the nozzle is mainly affected by density(ρ),viscosity(μ)and surface tension(σ)of droplets.When the liquid filament is about to disconnect from the nozzle,the filament length and filament front velocity are found to have a linear correlation withσ/ρμand ln(ρ/(μσ1/2)).展开更多
The article Jetting-based bioprinting:process,dispense physics,and applications,written by Wei Long Ng and Viktor Shkolnikov,was originally published electronically on the publisher’s internet portal on 12 July 2024 ...The article Jetting-based bioprinting:process,dispense physics,and applications,written by Wei Long Ng and Viktor Shkolnikov,was originally published electronically on the publisher’s internet portal on 12 July 2024 without open access.展开更多
Multi-material 3D fabrication at the nanoscale has been a long-sought goal in additive manufacturing,with great potential for the direct construction of functional micro/nanosystems rather than just arbitrary 3D struc...Multi-material 3D fabrication at the nanoscale has been a long-sought goal in additive manufacturing,with great potential for the direct construction of functional micro/nanosystems rather than just arbitrary 3D structures.To achieve this goal,researchers have introduced several nanoscale 3D printing principles,explored various multi-material switching and combination strategies,and demonstrated their potential applications in 3D integrated circuits,optoelectronics,biological devices,micro/nanorobots,etc.Although some progress has been made,it is still at the primary stage,and a serious breakthrough is needed to directly construct functional micro/nano systems.In this perspective,the development,current status and prospects of multi-material 3D nanoprinting are presented.We envision that this 3D printing will unlock innovative solutions and make significant contributions to various technologies and industries in the near future.展开更多
The burgeoning interest in flexible electronics necessitates the creation of patterning technology specifically tailored for flexible substrates and complex surface morphologies.Among a variety of patterning technique...The burgeoning interest in flexible electronics necessitates the creation of patterning technology specifically tailored for flexible substrates and complex surface morphologies.Among a variety of patterning techniques,transfer printing emerges as one of the most efficient,cost-effective,and scalable methods.It boasts the ability for high-throughput fabrication of 0–3D micro-and nano-structures on flexible substrates,working in tandem with traditional lithography methods.This review highlights the critical issue of transfer printing:the flawless transfer of devices during the pick-up and printing process.We encapsulate recent advancements in numerous transfer printing techniques,with a particular emphasis on strategies to control adhesion forces at the substrate/device/stamp interfaces.These strategies are employed to meet the requirements of competing fractures for successful pick-up and print processes.The mechanism,advantages,disadvantages,and typical applications of each transfer printing technique will be thoroughly discussed.The conclusion section provides design guidelines and probes potential directions for future advancements.展开更多
Organ damage or failure arising from injury,disease,and aging poses challenges due to the body’s limited regenerative capabilities.Organ transplantation presents the issues of donor shortages and immune rejection ris...Organ damage or failure arising from injury,disease,and aging poses challenges due to the body’s limited regenerative capabilities.Organ transplantation presents the issues of donor shortages and immune rejection risks,necessitating innovative solutions.The three-dimensional(3D)bioprinting of organs on demand offers promise in tissue engineering and regenerative medicine.In this review,we explore the state-of-the-art bioprinting technologies,with a focus on bioink and cell type selections.We follow with discussions on advances in the bioprinting of solid organs,such as the heart,liver,kidney,and pancreas,highlighting the importance of vascularization and cell integration.Finally,we provide insights into key challenges and future directions in the context of the clinical translation of bioprinted organs and their large-scale production.展开更多
Perovskite solar cells(PSCs)emerge as the most promising photovoltaics(PV)for their high performance and potential convenient cost-effective production routes comparing to the sophomore PV technologies.The printed PSC...Perovskite solar cells(PSCs)emerge as the most promising photovoltaics(PV)for their high performance and potential convenient cost-effective production routes comparing to the sophomore PV technologies.The printed PSCs with simplified device architecture and fabrication procedures could further enhance the competitive strength of PSC technology.In this work,we present an in-situ defect passivation(ISDP)assisted full-printing of high performance formamidine-lead bromide(FAPbBr_(3))PSCs.Only three rapid printing steps are involved for electron transporting layer(ETL),perovskite and carbon to form a complete solar cell on the low-cost fluorine-doped tin oxide(FTO)substrate.Long-chain polymer monomethyl ether polyethylene glycol is particularly utilized as the ISDP passivator,leading to conformal coating on the rough FTO and defect passivation for both ETL and perovskite during printing.A high efficiency of 10.85%(certified 10.14%)and a high V_(oc)up to 1.57 V are achieved for the printed device.The unencapsulated PSCs maintain above 90%of the initial efficiency after continuously heating at 85℃for 1000 h and over 80%of the efficiency after the maximum power point tracking for 3500 h.The fully printed semitransparent PSCs with carbon grids(CGs)show average visible light transmittance over 33%and an efficiency of 8.81%.展开更多
Miniature devices comprising stimulus-responsive hydrogels with high environmental adaptability are now considered competitive candidates in the fields of biomedicine,precise sensors,and tunable optics.Reliable and ad...Miniature devices comprising stimulus-responsive hydrogels with high environmental adaptability are now considered competitive candidates in the fields of biomedicine,precise sensors,and tunable optics.Reliable and advanced fabricationmethods are critical formaximizing the application capabilities ofminiature devices.Light-based three-dimensional(3D)printing technology offers the advantages of a wide range of applicable materials,high processing accuracy,and strong 3D fabrication capability,which is suitable for the development of miniature devices with various functions.This paper summarizes and highlights the recent advances in light-based 3D-printed miniaturized devices,with a focus on the latest breakthroughs in lightbased fabrication technologies,smart stimulus-responsive hydrogels,and tunable miniature devices for the fields of miniature cargo manipulation,targeted drug and cell delivery,active scaffolds,environmental sensing,and optical imaging.Finally,the challenges in the transition of tunable miniaturized devices from the laboratory to practical engineering applications are presented.Future opportunities that will promote the development of tunable microdevices are elaborated,contributing to their improved understanding of these miniature devices and further realizing their practical applications in various fields.展开更多
文摘Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.
文摘In this paper,the effects of four sorts of silica with the particle size range of 4～10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can provide the coated paper with higher density and contrast, better definition and good printing performance.
文摘Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.
文摘Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching model based on two step learning is established by finding a linear model by learning pure color data first and then a nonlinear modification model by learning mixed color data. Nonlinear multiple regression is used to fit the parameters of the modification model. Nonlinear modification function is discovered by BACON system by learning mixture data. Experiment results indicate that nonlinear color conversion by two step learning can further improve the accuracy when it is used for straightforward conversion from RGB to CMYK. An improved separation model based on GCR concept is proposed to solve the problem of gray balance and it can be used for three to four color conversion as well. The method proposed has better learning ability and faster printing speed than other historical approaches when it is applied to four color ink jet printing.
基金Supported by the National Innovation Fund OOC 26215120431
文摘A quaternary ammonium compound containing amino acid residue was synthesized by Converting 3-chloro-2-hydroxy- propyalkyldimethylammonium chlorides into its epoxide derivatives, then attaching an amino acid to the epoxide derivatives synthesized a quaternary ammonium compound containing amino acid residue. Modified dyes were prepared by the ionotropy of anionic dyes with the quaternary ammonium compound containing amino acid residue. It was discovered that the modified dyes exhibited an excellent pH controllable solubility. These modified dyes have good water solubility at pH> 8.0, but they were water insoluble at pH < 6.5. On the printing paper, modified dyes in water-based ink-jet print ink could convert to water insoluble form and give prints excellent water fastness.
基金supported by the Innovative Research Group Project of the National Natural Science Foundation of China(T2121004)Key Programme(52235007)National Outstanding Youth Foundation of China(52325504).
文摘Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.
文摘In order to study the preferred skin color for printing images,two CMYK images from ISO 400 and one from iStock,including five skin color images of East Asian females was selected in this study.The images were adjusted with the CMYK printing ink volume variation of the single,double and triple channels in the given 280%total ink limit conditions.A larger number of color vision normal observers were organized to carry out the color preference evaluation experiment,and the selected preferred skin colors were analyzed.The distribution range of the chromaticity values for skin color images were obtained and the results indicated that there are three regions for printing skin color preferences,and the observers have a memory preference for brighter,fairer skin colors in young female and a reddish skin colors in girl,which can provide the guidance for color adjustment of printed skin color images.
基金support from the National Key Research and Development Program of China(No.2021YFB3701503)the Key Research and Development Program of Ningbo,China(No.2023Z107).
文摘As a novel 2D material,Ti_(3)C_(2)T_(x)-MXene has become a major area of interest in the field of microwave absorption(MA).However,the MA effect of common Ti_(3)C_(2)T_(x)-MXene is not prominent and often requires complex processes or combinations of other ma-terials to achieve enhanced performance.In this context,a kind of gradient woodpile structure using common Ti_(3)C_(2)T_(x)-MXene as MA ma-terial was designed and manufactured through direct ink writing(DIW)3D printing.The minimum reflection loss(RL_(min))of the Ti_(3)C_(2)T_(x)-MXene-based gradient woodpile structures with a thickness of less than 3 mm can reach-70 dB,showing considerable improve-ment compared with that of a completely filled structure.In addition,the effective absorption bandwidth(EAB)reaches 7.73 GHz.This study demonstrates that a Ti_(3)C_(2)T_(x)-MXene material with excellent MA performance and tunable frequency band can be successfully fab-ricated with a macroscopic structural design and through DIW 3D printing without complex material hybridization and modification,of-fering broad application prospects by reducing electromagnetic wave radiation and interference.
基金supported by the National Natural Science Foundation of China(Nos.52325504,52235007,and T2121004).
文摘As surgical procedures transition from conventional resection to advanced tissue-regeneration technologies,human disease therapy has witnessed a great leap forward.In particular,three-dimensional(3D)bioprinting stands as a landmark in this setting,by promising the precise integration of biomaterials,cells,and bioactive molecules,thus opening up a novel avenue for tissue/organ regeneration.Curated by the editorial board of Bio-Design and Manufacturing,this review brings together a cohort of leading young scientists in China to dissect the core functionalities and evolutionary trajectory of 3D bioprinting,by elucidating the intricate challenges encountered in the manufacturing of transplantable organs.We further delve into the translational pathway from scientific research to clinical application,emphasizing the imperativeness of establishing a regulatory framework and rigorously enforcing quality-control measures.Finally,this review outlines the strategic landscape and innovative achievements of China in this field and provides a comprehensive roadmap for researchers worldwide to propel this field collectively to even greater heights.
基金supported by 1.3.5 project for disciplines of excellence,West China Hospital,Sichuan University(No.ZYGD23030)National Natural Science Foundation of China(No.82172254)Science and Technological Supports Project of Sichuan Province,China(No.2024YFFK0214).
文摘With organ transplantation facing many dilemmas,tissue and organ regeneration as an alternative has bright prospects.In regenerative medicine,Three-dimensional(3D)printing technology and stem cells has been widely applied to the treatment of diseases related to tissue or organ replacement in dentistry,respectively.However,there are very few studies on the combination of the two,and even fewer clinical studies have been reported in dentistry.In this review,the current oral tissue engineering in vivo and in vitro based on 3D printing and stem cell technology will be summarized,and the discussion on the development prospects of this research direction will be given.Besides,the working principles and advantages&disadvantages of several types of 3D printers,as well as the mechanism of stem cells in tissue engineering will be elucidated.This review provides clinicians and researchers with the current state of research and trends in the combination of stem cells and 3D printing technology to treat oral-related diseases.In the future,3D bioprinters are poised for ongoing innovation with the advancement of relevant technologies,catalyzing an increase in clinical studies focused on treating oral diseases using stem cells and 3D scaffolds.Consequently,these developments will further advance the field of oral tissue engineering.
基金supported by the National Key Basic Research and Development Program of China (2015CB655004)the National Natural Science Foundation of China (U1601651, 51521002, U1301243, 61574061)the Educational Commission of Guangdong Province (2015B090914003, 2014KZDXM012)
文摘Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.
基金supported by the National Natural Science Foundation of China(52125501 and 52205317)the Key Research Project of Shaanxi Province(2021LLRH-08)+4 种基金the Program for Innovation Team of Shaanxi Province(2023-CX-TD-17)the Natural Science Basis Research Plan in Shaanxi Province of China(2022JQ-523)the High-Level Talent Recruitment Program of Shaanxi Provincethe Fundamental Research Funds for the Central UniversitiesChina Postdoctoral Science Foundation。
文摘3D printing stands at the forefront of transforming space exploration,offering unprecedented on-demand and rapid manufacturing capabilities.It adeptly addresses challenges such as mass reduction,intricate component fabrication,and resource constraints.Despite the obstacles posed by microgravity and extreme environments,continual advancements underscore the pivotal role of 3D printing in aerospace science.Beyond its primary function of producing space structures,3D printing contributes significantly to progress in electronics,biomedicine,and resource optimization.This perspective delves into the technological advantages,environmental challenges,development status,and opportunities of 3D printing in space.Envisioning its crucial impact,we anticipate that 3D printing will unlock innovative solutions,reshape manufacturing practices,and foster self-sufficiency in future space endeavors.
基金the National Natural Science Foundation of China(No.12072142)the Key Talent Recruitment Program of Guangdong Province(No.2019QN01Z438)+2 种基金the Science Technology and Innovation Commission of Shenzhen Municipality(ZDSYS20210623092005017)the China Postdoctoral Science Foundation(No.2022M721471)the Natural Science Foundation of Guangdong Province under the Grant(No.2022A1515010047)。
文摘Two-photon polymerization(TPP)is a cutting-edge micro/nanoscale three-dimensional(3D)printing technology based on the principle of two-photon absorption.TPP surpasses the diffraction limit in achieving feature sizes and excels in fabricating intricate 3D micro/nanostructures with exceptional resolution.The concept of 4D entails the fabrication of structures utilizing smart materials capable of undergoing shape,property,or functional changes in response to external stimuli over time.The integration of TPP and 4D printing introduces the possibility of producing responsive structures with micro/nanoscale accuracy,thereby enhancing the capabilities and potential applications of both technologies.This paper comprehensively reviews TPP-based 4D printing technology and its diverse applications.First,the working principles of TPP and its recent advancements are introduced.Second,the optional4D printing materials suitable for fabrication with TPP are discussed.Finally,this review paper highlights several noteworthy applications of TPP-based 4D printing,including domains such as biomedical microrobots,bioinspired microactuators,autonomous mobile microrobots,transformable devices and robots,as well as anti-counterfeiting microdevices.In conclusion,this paper provides valuable insights into the current status and future prospects of TPP-based4D printing technology,thereby serving as a guide for researchers and practitioners.
基金supported by the Tsinghua University–Toyota Research Center Project。
文摘As an accurate 2D/3D fabrication tool,inkjet printing technology has great potential in preparation of micro electronic devices.The morphology of droplets produced by the inkjet printer has a great impact on the accuracy of deposition.In this study,the drop-on-demand(DoD)inkjet simulation model was established,and the accuracy of the simulation model was verified by corresponding experiments.The simulation result shows that the velocity of the droplet front and tail,as well as the time to disconnect from the nozzle is mainly affected by density(ρ),viscosity(μ)and surface tension(σ)of droplets.When the liquid filament is about to disconnect from the nozzle,the filament length and filament front velocity are found to have a linear correlation withσ/ρμand ln(ρ/(μσ1/2)).
文摘The article Jetting-based bioprinting:process,dispense physics,and applications,written by Wei Long Ng and Viktor Shkolnikov,was originally published electronically on the publisher’s internet portal on 12 July 2024 without open access.
基金financially National Natural Science Foundation of China(Nos.52075209 and 51925503)Natural Science Foundation for Distinguished Young Scholars of Hubei province of China(No.2022CFA066)Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2021QNRC001)。
文摘Multi-material 3D fabrication at the nanoscale has been a long-sought goal in additive manufacturing,with great potential for the direct construction of functional micro/nanosystems rather than just arbitrary 3D structures.To achieve this goal,researchers have introduced several nanoscale 3D printing principles,explored various multi-material switching and combination strategies,and demonstrated their potential applications in 3D integrated circuits,optoelectronics,biological devices,micro/nanorobots,etc.Although some progress has been made,it is still at the primary stage,and a serious breakthrough is needed to directly construct functional micro/nano systems.In this perspective,the development,current status and prospects of multi-material 3D nanoprinting are presented.We envision that this 3D printing will unlock innovative solutions and make significant contributions to various technologies and industries in the near future.
基金financial support from the RGC Senior Research Fellowship Scheme(SRFS2122-5S04)General Research Fund(15304322)+1 种基金RGC Postdoctoral Fellowship(PDFS2324-5S10)State Key Laboratory for Ultraprecision Machining Technology(1-BBXR).
文摘The burgeoning interest in flexible electronics necessitates the creation of patterning technology specifically tailored for flexible substrates and complex surface morphologies.Among a variety of patterning techniques,transfer printing emerges as one of the most efficient,cost-effective,and scalable methods.It boasts the ability for high-throughput fabrication of 0–3D micro-and nano-structures on flexible substrates,working in tandem with traditional lithography methods.This review highlights the critical issue of transfer printing:the flawless transfer of devices during the pick-up and printing process.We encapsulate recent advancements in numerous transfer printing techniques,with a particular emphasis on strategies to control adhesion forces at the substrate/device/stamp interfaces.These strategies are employed to meet the requirements of competing fractures for successful pick-up and print processes.The mechanism,advantages,disadvantages,and typical applications of each transfer printing technique will be thoroughly discussed.The conclusion section provides design guidelines and probes potential directions for future advancements.
基金supported by the National Natural Science Foundation of China(82372403)the Shenzhen Science and Technology Program(ZDSYS20220606100606013)+5 种基金the Shenzhen Institute of Synthetic Biology Scientific Research Program(DWKF20190010 and JCHZ20200005)the Shenzhen Science and Technology Major Project(KJZD20230923114302006)the National Institute of Dental and Craniofacial Research Award(R01DE028614)the National Institute of Biomedical Imaging and Bioengineering Award(R01EB034566)the National Institute of Allergy and the Infectious Diseases Award(U19AI142733)the 2236 CoCirculation2 of TUBITAK award(121C359).
文摘Organ damage or failure arising from injury,disease,and aging poses challenges due to the body’s limited regenerative capabilities.Organ transplantation presents the issues of donor shortages and immune rejection risks,necessitating innovative solutions.The three-dimensional(3D)bioprinting of organs on demand offers promise in tissue engineering and regenerative medicine.In this review,we explore the state-of-the-art bioprinting technologies,with a focus on bioink and cell type selections.We follow with discussions on advances in the bioprinting of solid organs,such as the heart,liver,kidney,and pancreas,highlighting the importance of vascularization and cell integration.Finally,we provide insights into key challenges and future directions in the context of the clinical translation of bioprinted organs and their large-scale production.
基金financially supported by the Guangdong Pearl River Talent Program (2021ZT09L400)National Natural Science Foundation of China (52072284, 21875178, 91963209)the Joint Funds of Natural Science Foundation of Hubei Province (2022CFD087)
文摘Perovskite solar cells(PSCs)emerge as the most promising photovoltaics(PV)for their high performance and potential convenient cost-effective production routes comparing to the sophomore PV technologies.The printed PSCs with simplified device architecture and fabrication procedures could further enhance the competitive strength of PSC technology.In this work,we present an in-situ defect passivation(ISDP)assisted full-printing of high performance formamidine-lead bromide(FAPbBr_(3))PSCs.Only three rapid printing steps are involved for electron transporting layer(ETL),perovskite and carbon to form a complete solar cell on the low-cost fluorine-doped tin oxide(FTO)substrate.Long-chain polymer monomethyl ether polyethylene glycol is particularly utilized as the ISDP passivator,leading to conformal coating on the rough FTO and defect passivation for both ETL and perovskite during printing.A high efficiency of 10.85%(certified 10.14%)and a high V_(oc)up to 1.57 V are achieved for the printed device.The unencapsulated PSCs maintain above 90%of the initial efficiency after continuously heating at 85℃for 1000 h and over 80%of the efficiency after the maximum power point tracking for 3500 h.The fully printed semitransparent PSCs with carbon grids(CGs)show average visible light transmittance over 33%and an efficiency of 8.81%.
基金financially supported by the Research Impact Fund (project no. R4015-21)Research Fellow Scheme (project no. RFS2122-4S03)+3 种基金Strategic Topics Grant (project no. STG1/E-401/23- N) from the Hong Kong Research Grants Council (RGC)the CUHK internal grantsthe support from Multi-Scale Medical Robotics Centre (MRC),InnoHK, at the Hong Kong Science Parkthe SIAT–CUHK Joint Laboratory of Robotics and Intelligent Systems
文摘Miniature devices comprising stimulus-responsive hydrogels with high environmental adaptability are now considered competitive candidates in the fields of biomedicine,precise sensors,and tunable optics.Reliable and advanced fabricationmethods are critical formaximizing the application capabilities ofminiature devices.Light-based three-dimensional(3D)printing technology offers the advantages of a wide range of applicable materials,high processing accuracy,and strong 3D fabrication capability,which is suitable for the development of miniature devices with various functions.This paper summarizes and highlights the recent advances in light-based 3D-printed miniaturized devices,with a focus on the latest breakthroughs in lightbased fabrication technologies,smart stimulus-responsive hydrogels,and tunable miniature devices for the fields of miniature cargo manipulation,targeted drug and cell delivery,active scaffolds,environmental sensing,and optical imaging.Finally,the challenges in the transition of tunable miniaturized devices from the laboratory to practical engineering applications are presented.Future opportunities that will promote the development of tunable microdevices are elaborated,contributing to their improved understanding of these miniature devices and further realizing their practical applications in various fields.
