Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood(BML)algorithm. However, the difference beam is rare...Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood(BML)algorithm. However, the difference beam is rarely used in superresolution methods, especially in low elevation estimation. The target airspace information in the difference beam is different from the target airspace information in the sum beam. And the use of difference beams does not significantly increase the complexity of the system and algorithms. Thus, this paper applies the difference beam to the beamformer to improve the elevation estimation performance of BML algorithm. And the direction and number of beams can be adjusted according to the actual needs. The theoretical target elevation angle root means square error(RMSE) and the computational complexity of the proposed algorithms are analyzed. Finally, computer simulations and real data processing results demonstrate the effectiveness of the proposed algorithms.展开更多
The calibration of transfer functions is essential for accurate pavement performance predictions in the PavementME design. Several studies have used the least square approach to calibrate these transfer functions. Lea...The calibration of transfer functions is essential for accurate pavement performance predictions in the PavementME design. Several studies have used the least square approach to calibrate these transfer functions. Least square is a widely used simplistic approach based on certain assumptions. Literature shows that these least square approach assumptions may not apply to the non-normal distributions. This study introduces a new methodology for calibrating the transverse cracking and international roughness index(IRI) models in rigid pavements using maximum likelihood estimation(MLE). Synthetic data for transverse cracking, with and without variability, are generated to illustrate the applicability of MLE using different known probability distributions(exponential,gamma, log-normal, and negative binomial). The approach uses measured data from the Michigan Department of Transportation's(MDOT) pavement management system(PMS) database for 70 jointed plain concrete pavement(JPCP) sections to calibrate and validate transfer functions. The MLE approach is combined with resampling techniques to improve the robustness of calibration coefficients. The results show that the MLE transverse cracking model using the gamma distribution consistently outperforms the least square for synthetic and observed data. For observed data, MLE estimates of parameters produced lower SSE and bias than least squares(e.g., for the transverse cracking model, the SSE values are 3.98 vs. 4.02, and the bias values are 0.00 and-0.41). Although negative binomial distribution is the most suitable fit for the IRI model for MLE, the least square results are slightly better than MLE. The bias values are-0.312 and 0.000 for the MLE and least square methods. Overall, the findings indicate that MLE is a robust method for calibration, especially for non-normally distributed data such as transverse cracking.展开更多
In order to obtain the life information of the vacuum fluorescent display （VFD） in a short time, a model of constant stress accelerated life tests （CSALT） is established with its filament temperature increased, an...In order to obtain the life information of the vacuum fluorescent display （VFD） in a short time, a model of constant stress accelerated life tests （CSALT） is established with its filament temperature increased, and four constant stress tests are conducted. The Weibull function is applied to describe the life distribution of the VFD, and the maximum likelihood estimation （MLE） and its iterative flow chart are used to calculate the shape parameters and the scale parameters. Furthermore, the accelerated life equation is determined by the least square method, the Kolmogorov-Smirnov test is performed to verify whether the VFD life meets the Weibull distribution or not, and selfdeveloped software is employed to predict the average life and the reliable life. Statistical data analysis results demonstrate that the test plans are feasible and versatile, that the VFD life follows the Weibull distribution, and that the VFD accelerated model satisfies the linear Arrhenius equation. The proposed method and the estimated life information of the VFD can provide some significant guideline to its manufacturers and customers.展开更多
In order to detect whether the data conforms to the given model, it is necessary to diagnose the data in the statistical way. The diagnostic problem in generalized nonlinear models based on the maximum Lq-likelihood e...In order to detect whether the data conforms to the given model, it is necessary to diagnose the data in the statistical way. The diagnostic problem in generalized nonlinear models based on the maximum Lq-likelihood estimation is considered. Three diagnostic statistics are used to detect whether the outliers exist in the data set. Simulation results show that when the sample size is small, the values of diagnostic statistics based on the maximum Lq-likelihood estimation are greater than the values based on the maximum likelihood estimation. As the sample size increases, the difference between the values of the diagnostic statistics based on two estimation methods diminishes gradually. It means that the outliers can be distinguished easier through the maximum Lq-likelihood method than those through the maximum likelihood estimation method.展开更多
To estimate the spreading sequence of the direct sequence spread spectrum (DSSS) signal, a fast algorithm based on maximum likelihood function is proposed, and the theoretical derivation of the algorithm is provided. ...To estimate the spreading sequence of the direct sequence spread spectrum (DSSS) signal, a fast algorithm based on maximum likelihood function is proposed, and the theoretical derivation of the algorithm is provided. By simplifying the objective function of maximum likelihood estimation, the algorithm can realize sequence synchronization and sequence estimation via adaptive iteration and sliding window. Since it avoids the correlation matrix computation, the algorithm significantly reduces the storage requirement and the computation complexity. Simulations show that it is a fast convergent algorithm, and can perform well in low signal to noise ratio (SNR).展开更多
By taking the subsequence out of the input-output sequence of a system polluted by white noise, an independent observation sequence and its probability density are obtained and then a maximum likelihood estimation of ...By taking the subsequence out of the input-output sequence of a system polluted by white noise, an independent observation sequence and its probability density are obtained and then a maximum likelihood estimation of the identification parameters is given. In order to decrease the asymptotic error, a corrector of maximum likelihood (CML) estimation with its recursive algorithm is given. It has been proved that the corrector has smaller asymptotic error than the least square methods. A simulation example shows that the corrector of maximum likelihood estimation is of higher approximating precision to the true parameters than the least square methods.展开更多
Losses due to hazards are inevitable and numerical simulations for estimations are complex.This study proposes a model for estimating correlated seismic damages and losses of a water supply pipeline system as an alter...Losses due to hazards are inevitable and numerical simulations for estimations are complex.This study proposes a model for estimating correlated seismic damages and losses of a water supply pipeline system as an alternative for numerical simulations.The common approach in other research shows average damage spots per mesh estimated statistically independent to one another.Spatially distributed lifeline systems,such as water supply pipelines,are interconnected,and seismic spatial variability affects the damages across the region;thus,spatial correlation of damage spots is an important factor in target areas for portfolio loss estimation.Generally,simulations are used to estimate possible losses;however,these assume each damage behaves independently and uncorrelated.This paper assumed that damages per mesh behave in a Poisson distribution to avoid over-dispersion and eliminate negative losses in estimations.The purpose of this study is to obtain a probabilistic portfolio loss model of an extensive water supply area.The proposed model was compared to the numerical simulation data with the correlated Poisson distribution.The application of the Normal To Anything(NORTA)obtained correlations for Poisson Distributions.The proposed probabilistic portfolio loss model,based on the generalized linear model and central limit theory,estimated the possible losses,such as the Probable Maximum Loss(PML,90%non-exceedance)or Normal Expected Loss(NEL,50%non-exceedance).The proposed model can be used in other lifeline systems as well,though additional investigation is needed for confirmation.From the estimations,a seismic physical portfolio loss for the water supply system was presented.The portfolio was made to show possible outcomes for the system.The proposed method was tested and analyzed using an artificial field and a location-based scenario of a water supply pipeline system.This would aid in pre-disaster planning and would require only a few steps and time.展开更多
Yule-Simon distribution has a wide range of practical applications, such as in networkscience, biology and humanities. A lot of work focuses on the study of how well the empirical datafits Yule-Simon distribution or h...Yule-Simon distribution has a wide range of practical applications, such as in networkscience, biology and humanities. A lot of work focuses on the study of how well the empirical datafits Yule-Simon distribution or how to estimate the parameter. There are still some open problems,such as the error analysis of parameter estimation, the theoretical proof of the convergence of theiterative algorithm for maximum likelihood estimation of parameters. The Yule-Simon distributionis a heavy-tailed distribution and the parameter is usually less than 2, so the variance does notexist. This makes it difficult to give an interval estimation of the parameter. Using the compressiontransformation, this paper proposes a method of interval estimation based on the centrallimit theorem. This method can be applied to many heavy-tailed distributions. The other twoasymptotic confidence intervals of the parameter are obtained based on the maximum likelihoodand the mode method. These estimation methods are compared in simulations and applications toempirical data.展开更多
The estimation of target parameters in MIMO radar signal processing is one of the most important research topics. An efficient implementation of the Maximum Likelihood estimator is presented in this paper to estimate ...The estimation of target parameters in MIMO radar signal processing is one of the most important research topics. An efficient implementation of the Maximum Likelihood estimator is presented in this paper to estimate the DOA (Direction of Arrival), initial velocity and acceleration of a maneuvering target in colocated MIMO radar. The target’s DOA is estimated in the first place, then a Maximum-Likelihood (ML) estimation based on peak search is applied to a two-dimensional grids providing estimation of initial velocity and acceleration. Simulations show that the MIMO radar has a better performance in DOA estimation than the phased array radar. By means of Monte Carlo simulations, the estimation error of initial velocity and acceleration on different SNRs are calculated. The results also suggest the effectiveness of this method.展开更多
Low elevation estimation,which has attracted wide attention due to the presence of specular multipath,is essential for tracking radars.Frequency agility not only has the advantage of strong anti-interference ability,b...Low elevation estimation,which has attracted wide attention due to the presence of specular multipath,is essential for tracking radars.Frequency agility not only has the advantage of strong anti-interference ability,but also can enhance the performance of tracking radars.A frequency-agile refined maximum likelihood(RML)algorithm based on optimal fusion is proposed.The algorithm constructs an optimization problem,which minimizes the mean square error(MSE)of angle estimation.Thereby,the optimal weight at different frequency points is obtained for fusing the angle estimation.Through theoretical analysis and simulation,the frequency-agile RML algorithm based on optimal fusion can improve the accuracy of angle estimation effectively.展开更多
Background: Bivariate count data are commonly encountered in medicine, biology, engineering, epidemiology and many other applications. The Poisson distribution has been the model of choice to analyze such data. In mos...Background: Bivariate count data are commonly encountered in medicine, biology, engineering, epidemiology and many other applications. The Poisson distribution has been the model of choice to analyze such data. In most cases mutual independence among the variables is assumed, however this fails to take into accounts the correlation between the outcomes of interests. A special bivariate form of the multivariate Lagrange family of distribution, names Generalized Bivariate Poisson Distribution, is considered in this paper. Objectives: We estimate the model parameters using the method of maximum likelihood and show that the model fits the count variables representing components of metabolic syndrome in spousal pairs. We use the likelihood local score to test the significance of the correlation between the counts. We also construct confidence interval on the ratio of the two correlated Poisson means. Methods: Based on a random sample of pairs of count data, we show that the score test of independence is locally most powerful. We also provide a formula for sample size estimation for given level of significance and given power. The confidence intervals on the ratio of correlated Poisson means are constructed using the delta method, the Fieller’s theorem, and the nonparametric bootstrap. We illustrate the methodologies on metabolic syndrome data collected from 4000 spousal pairs. Results: The bivariate Poisson model fitted the metabolic syndrome data quite satisfactorily. Moreover, the three methods of confidence interval estimation were almost identical, meaning that they have the same interval width.展开更多
This paper proposes to apply the genetic algorithm and the firefly algorithm to enhance the estimation of the direction of arrival (DOA) angle of electromagnetic signals of a smart antenna array. This estimation is es...This paper proposes to apply the genetic algorithm and the firefly algorithm to enhance the estimation of the direction of arrival (DOA) angle of electromagnetic signals of a smart antenna array. This estimation is essential for beamforming, where the antenna array radiating pattern is steered to provide faster and reliable data transmission with increased coverage. This work proposes using metaheuristics to improve a maximum likelihood DOA estimator for an antenna array arranged in a uniform cuboidal geometry. The DOA estimation performance of the proposed algorithm was compared to that of MUSIC on different two dimensions scenarios. The metaheuristic algorithms present better performance than the well-known MUSIC algorithm.展开更多
In this paper, an importance sampling maximum likelihood(ISML) estimator for direction-of-arrival(DOA) of incoherently distributed(ID) sources is proposed. Starting from the maximum likelihood estimation description o...In this paper, an importance sampling maximum likelihood(ISML) estimator for direction-of-arrival(DOA) of incoherently distributed(ID) sources is proposed. Starting from the maximum likelihood estimation description of the uniform linear array(ULA), a decoupled concentrated likelihood function(CLF) is presented. A new objective function based on CLF which can obtain a closed-form solution of global maximum is constructed according to Pincus theorem. To obtain the optimal value of the objective function which is a complex high-dimensional integral,we propose an importance sampling approach based on Monte Carlo random calculation. Next, an importance function is derived, which can simplify the problem of generating random vector from a high-dimensional probability density function(PDF) to generate random variable from a one-dimensional PDF. Compared with the existing maximum likelihood(ML) algorithms for DOA estimation of ID sources, the proposed algorithm does not require initial estimates, and its performance is closer to CramerRao lower bound(CRLB). The proposed algorithm performs better than the existing methods when the interval between sources to be estimated is small and in low signal to noise ratio(SNR)scenarios.展开更多
This paper presents a closed-form robust phase correlation based algorithm for performing image registration to subpixel accuracy.The subpixel translational shift information is directly obtained from the phase of the...This paper presents a closed-form robust phase correlation based algorithm for performing image registration to subpixel accuracy.The subpixel translational shift information is directly obtained from the phase of the normalized cross power spectrum by using Maximum Likelihood Estimation(MLE).The proposed algorithm also has slighter time complexity.Experimental results show that the proposed algorithm yields superior registration precision on the Cramér-Rao Bound(CRB) in the presence of aliasing and noise.展开更多
Multipath time delay estimation is constrained by the width of the signal correlation function when using correlation based methods. This paper obtains a high resolution time delay estimation by introducing Burg algor...Multipath time delay estimation is constrained by the width of the signal correlation function when using correlation based methods. This paper obtains a high resolution time delay estimation by introducing Burg algorithm and Marple algorithm of the maximum entropy power spectral estimation to non-resolvable multipath time delay estimatoin. The principles, the performaces and the results of computer simulation are given.展开更多
A diagnostic procedure based on maximum likelihood estimation, to study the convergence of the Markov chain produced by Gibbs sampler, is presented. The unbiasedness, consistent and asymptotic normality are considered...A diagnostic procedure based on maximum likelihood estimation, to study the convergence of the Markov chain produced by Gibbs sampler, is presented. The unbiasedness, consistent and asymptotic normality are considered for the estimation of the parameters produced by the procedure. An example is provided to illustrate the procedure, and the numerical result is consistent with the theoretical one.展开更多
In this paper maximum ranked set sampling procedure with unequal samples (MRSSU) is proposed. Maximum likelihood estimator and modified maximum likelihood estimator are obtained and their properties are studied under ...In this paper maximum ranked set sampling procedure with unequal samples (MRSSU) is proposed. Maximum likelihood estimator and modified maximum likelihood estimator are obtained and their properties are studied under exponential distribution. These methods are studied under both perfect and imperfect ranking (with errors in ranking). These estimators are then compared with estimators based on simple random sampling (SRS) and ranked set sampling (RSS) procedures. It is shown that relative efficiencies of the estimators based on MRSSU are better than those of the estimator based on SRS. Simulation results show that efficiency of proposed estimator is better than estimator based on RSS under ranking error.展开更多
Aiming at the solving problem of improved nonhomogeneous Poisson process( NHPP) model in engineering application,the immune clone maximum likelihood estimation( MLE)method for solving model parameters was proposed. Th...Aiming at the solving problem of improved nonhomogeneous Poisson process( NHPP) model in engineering application,the immune clone maximum likelihood estimation( MLE)method for solving model parameters was proposed. The minimum negative log-likelihood function was used as the objective function to optimize instead of using iterative method to solve complex system of equations,and the problem of parameter estimation of improved NHPP model was solved by immune clone algorithm. And the interval estimation of reliability indices was given by using fisher information matrix method and delta method. An example of failure truncated data from multiple numerical control( NC) machine tools was taken to prove the method. and the results show that the algorithm has a higher convergence rate and computational accuracy, which demonstrates the feasibility of the method.展开更多
A blind adaptive scheme is proposed for joint maximum likelihood （ML） channel estimation and data detection of singleinput multiple-output （SIMO） systems. The joint ML optimisation over channel and data is decompo...A blind adaptive scheme is proposed for joint maximum likelihood （ML） channel estimation and data detection of singleinput multiple-output （SIMO） systems. The joint ML optimisation over channel and data is decomposed into an iterative optimisation loop. An efficient global optimisation algorithm called the repeated weighted boosting search is employed at the upper level to optimally identify the unknown SIMO channel model, and the Viterbi algorithm is used at the lower level to produce the maximum likelihood sequence estimation of the unknown data sequence. A simulation example is used to demonstrate the effectiveness of this joint ML optimisation scheme for blind adaptive SIMO systems.展开更多
基金supported by the Fund for Foreign Scholars in University Research and Teaching Programs (B18039)。
文摘Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood(BML)algorithm. However, the difference beam is rarely used in superresolution methods, especially in low elevation estimation. The target airspace information in the difference beam is different from the target airspace information in the sum beam. And the use of difference beams does not significantly increase the complexity of the system and algorithms. Thus, this paper applies the difference beam to the beamformer to improve the elevation estimation performance of BML algorithm. And the direction and number of beams can be adjusted according to the actual needs. The theoretical target elevation angle root means square error(RMSE) and the computational complexity of the proposed algorithms are analyzed. Finally, computer simulations and real data processing results demonstrate the effectiveness of the proposed algorithms.
基金the Michigan Department of Transportation (MDOT) for the financial support of this study (report no. SPR1723)。
文摘The calibration of transfer functions is essential for accurate pavement performance predictions in the PavementME design. Several studies have used the least square approach to calibrate these transfer functions. Least square is a widely used simplistic approach based on certain assumptions. Literature shows that these least square approach assumptions may not apply to the non-normal distributions. This study introduces a new methodology for calibrating the transverse cracking and international roughness index(IRI) models in rigid pavements using maximum likelihood estimation(MLE). Synthetic data for transverse cracking, with and without variability, are generated to illustrate the applicability of MLE using different known probability distributions(exponential,gamma, log-normal, and negative binomial). The approach uses measured data from the Michigan Department of Transportation's(MDOT) pavement management system(PMS) database for 70 jointed plain concrete pavement(JPCP) sections to calibrate and validate transfer functions. The MLE approach is combined with resampling techniques to improve the robustness of calibration coefficients. The results show that the MLE transverse cracking model using the gamma distribution consistently outperforms the least square for synthetic and observed data. For observed data, MLE estimates of parameters produced lower SSE and bias than least squares(e.g., for the transverse cracking model, the SSE values are 3.98 vs. 4.02, and the bias values are 0.00 and-0.41). Although negative binomial distribution is the most suitable fit for the IRI model for MLE, the least square results are slightly better than MLE. The bias values are-0.312 and 0.000 for the MLE and least square methods. Overall, the findings indicate that MLE is a robust method for calibration, especially for non-normally distributed data such as transverse cracking.
基金Undergraduate Education High land Construction Project of Shanghaithe Key Course Construction of Shanghai Education Committee (No.20075302)the Key Technology R&D Program of Shanghai Municipality (No.08160510600)
文摘In order to obtain the life information of the vacuum fluorescent display （VFD） in a short time, a model of constant stress accelerated life tests （CSALT） is established with its filament temperature increased, and four constant stress tests are conducted. The Weibull function is applied to describe the life distribution of the VFD, and the maximum likelihood estimation （MLE） and its iterative flow chart are used to calculate the shape parameters and the scale parameters. Furthermore, the accelerated life equation is determined by the least square method, the Kolmogorov-Smirnov test is performed to verify whether the VFD life meets the Weibull distribution or not, and selfdeveloped software is employed to predict the average life and the reliable life. Statistical data analysis results demonstrate that the test plans are feasible and versatile, that the VFD life follows the Weibull distribution, and that the VFD accelerated model satisfies the linear Arrhenius equation. The proposed method and the estimated life information of the VFD can provide some significant guideline to its manufacturers and customers.
基金The National Natural Science Foundation of China(No.11171065)the Natural Science Foundation of Jiangsu Province(No.BK2011058)
文摘In order to detect whether the data conforms to the given model, it is necessary to diagnose the data in the statistical way. The diagnostic problem in generalized nonlinear models based on the maximum Lq-likelihood estimation is considered. Three diagnostic statistics are used to detect whether the outliers exist in the data set. Simulation results show that when the sample size is small, the values of diagnostic statistics based on the maximum Lq-likelihood estimation are greater than the values based on the maximum likelihood estimation. As the sample size increases, the difference between the values of the diagnostic statistics based on two estimation methods diminishes gradually. It means that the outliers can be distinguished easier through the maximum Lq-likelihood method than those through the maximum likelihood estimation method.
基金supported by Joint Foundation of and China Academy of Engineering Physical (10676006)
文摘To estimate the spreading sequence of the direct sequence spread spectrum (DSSS) signal, a fast algorithm based on maximum likelihood function is proposed, and the theoretical derivation of the algorithm is provided. By simplifying the objective function of maximum likelihood estimation, the algorithm can realize sequence synchronization and sequence estimation via adaptive iteration and sliding window. Since it avoids the correlation matrix computation, the algorithm significantly reduces the storage requirement and the computation complexity. Simulations show that it is a fast convergent algorithm, and can perform well in low signal to noise ratio (SNR).
文摘By taking the subsequence out of the input-output sequence of a system polluted by white noise, an independent observation sequence and its probability density are obtained and then a maximum likelihood estimation of the identification parameters is given. In order to decrease the asymptotic error, a corrector of maximum likelihood (CML) estimation with its recursive algorithm is given. It has been proved that the corrector has smaller asymptotic error than the least square methods. A simulation example shows that the corrector of maximum likelihood estimation is of higher approximating precision to the true parameters than the least square methods.
文摘Losses due to hazards are inevitable and numerical simulations for estimations are complex.This study proposes a model for estimating correlated seismic damages and losses of a water supply pipeline system as an alternative for numerical simulations.The common approach in other research shows average damage spots per mesh estimated statistically independent to one another.Spatially distributed lifeline systems,such as water supply pipelines,are interconnected,and seismic spatial variability affects the damages across the region;thus,spatial correlation of damage spots is an important factor in target areas for portfolio loss estimation.Generally,simulations are used to estimate possible losses;however,these assume each damage behaves independently and uncorrelated.This paper assumed that damages per mesh behave in a Poisson distribution to avoid over-dispersion and eliminate negative losses in estimations.The purpose of this study is to obtain a probabilistic portfolio loss model of an extensive water supply area.The proposed model was compared to the numerical simulation data with the correlated Poisson distribution.The application of the Normal To Anything(NORTA)obtained correlations for Poisson Distributions.The proposed probabilistic portfolio loss model,based on the generalized linear model and central limit theory,estimated the possible losses,such as the Probable Maximum Loss(PML,90%non-exceedance)or Normal Expected Loss(NEL,50%non-exceedance).The proposed model can be used in other lifeline systems as well,though additional investigation is needed for confirmation.From the estimations,a seismic physical portfolio loss for the water supply system was presented.The portfolio was made to show possible outcomes for the system.The proposed method was tested and analyzed using an artificial field and a location-based scenario of a water supply pipeline system.This would aid in pre-disaster planning and would require only a few steps and time.
基金supported by the National Natural Science Foundation of China(Grant No.11961035)Jiangxi Provincial Natural Science Foundation(Grant No.20224BCD41001).
文摘Yule-Simon distribution has a wide range of practical applications, such as in networkscience, biology and humanities. A lot of work focuses on the study of how well the empirical datafits Yule-Simon distribution or how to estimate the parameter. There are still some open problems,such as the error analysis of parameter estimation, the theoretical proof of the convergence of theiterative algorithm for maximum likelihood estimation of parameters. The Yule-Simon distributionis a heavy-tailed distribution and the parameter is usually less than 2, so the variance does notexist. This makes it difficult to give an interval estimation of the parameter. Using the compressiontransformation, this paper proposes a method of interval estimation based on the centrallimit theorem. This method can be applied to many heavy-tailed distributions. The other twoasymptotic confidence intervals of the parameter are obtained based on the maximum likelihoodand the mode method. These estimation methods are compared in simulations and applications toempirical data.
文摘The estimation of target parameters in MIMO radar signal processing is one of the most important research topics. An efficient implementation of the Maximum Likelihood estimator is presented in this paper to estimate the DOA (Direction of Arrival), initial velocity and acceleration of a maneuvering target in colocated MIMO radar. The target’s DOA is estimated in the first place, then a Maximum-Likelihood (ML) estimation based on peak search is applied to a two-dimensional grids providing estimation of initial velocity and acceleration. Simulations show that the MIMO radar has a better performance in DOA estimation than the phased array radar. By means of Monte Carlo simulations, the estimation error of initial velocity and acceleration on different SNRs are calculated. The results also suggest the effectiveness of this method.
基金supported by the Fund for Foreign Scholars in University Research and Teaching Programs(the 111 Project)(B18039).
文摘Low elevation estimation,which has attracted wide attention due to the presence of specular multipath,is essential for tracking radars.Frequency agility not only has the advantage of strong anti-interference ability,but also can enhance the performance of tracking radars.A frequency-agile refined maximum likelihood(RML)algorithm based on optimal fusion is proposed.The algorithm constructs an optimization problem,which minimizes the mean square error(MSE)of angle estimation.Thereby,the optimal weight at different frequency points is obtained for fusing the angle estimation.Through theoretical analysis and simulation,the frequency-agile RML algorithm based on optimal fusion can improve the accuracy of angle estimation effectively.
文摘Background: Bivariate count data are commonly encountered in medicine, biology, engineering, epidemiology and many other applications. The Poisson distribution has been the model of choice to analyze such data. In most cases mutual independence among the variables is assumed, however this fails to take into accounts the correlation between the outcomes of interests. A special bivariate form of the multivariate Lagrange family of distribution, names Generalized Bivariate Poisson Distribution, is considered in this paper. Objectives: We estimate the model parameters using the method of maximum likelihood and show that the model fits the count variables representing components of metabolic syndrome in spousal pairs. We use the likelihood local score to test the significance of the correlation between the counts. We also construct confidence interval on the ratio of the two correlated Poisson means. Methods: Based on a random sample of pairs of count data, we show that the score test of independence is locally most powerful. We also provide a formula for sample size estimation for given level of significance and given power. The confidence intervals on the ratio of correlated Poisson means are constructed using the delta method, the Fieller’s theorem, and the nonparametric bootstrap. We illustrate the methodologies on metabolic syndrome data collected from 4000 spousal pairs. Results: The bivariate Poisson model fitted the metabolic syndrome data quite satisfactorily. Moreover, the three methods of confidence interval estimation were almost identical, meaning that they have the same interval width.
文摘This paper proposes to apply the genetic algorithm and the firefly algorithm to enhance the estimation of the direction of arrival (DOA) angle of electromagnetic signals of a smart antenna array. This estimation is essential for beamforming, where the antenna array radiating pattern is steered to provide faster and reliable data transmission with increased coverage. This work proposes using metaheuristics to improve a maximum likelihood DOA estimator for an antenna array arranged in a uniform cuboidal geometry. The DOA estimation performance of the proposed algorithm was compared to that of MUSIC on different two dimensions scenarios. The metaheuristic algorithms present better performance than the well-known MUSIC algorithm.
基金supported by the basic research program of Natural Science in Shannxi province of China (2021JQ-369)。
文摘In this paper, an importance sampling maximum likelihood(ISML) estimator for direction-of-arrival(DOA) of incoherently distributed(ID) sources is proposed. Starting from the maximum likelihood estimation description of the uniform linear array(ULA), a decoupled concentrated likelihood function(CLF) is presented. A new objective function based on CLF which can obtain a closed-form solution of global maximum is constructed according to Pincus theorem. To obtain the optimal value of the objective function which is a complex high-dimensional integral,we propose an importance sampling approach based on Monte Carlo random calculation. Next, an importance function is derived, which can simplify the problem of generating random vector from a high-dimensional probability density function(PDF) to generate random variable from a one-dimensional PDF. Compared with the existing maximum likelihood(ML) algorithms for DOA estimation of ID sources, the proposed algorithm does not require initial estimates, and its performance is closer to CramerRao lower bound(CRLB). The proposed algorithm performs better than the existing methods when the interval between sources to be estimated is small and in low signal to noise ratio(SNR)scenarios.
文摘This paper presents a closed-form robust phase correlation based algorithm for performing image registration to subpixel accuracy.The subpixel translational shift information is directly obtained from the phase of the normalized cross power spectrum by using Maximum Likelihood Estimation(MLE).The proposed algorithm also has slighter time complexity.Experimental results show that the proposed algorithm yields superior registration precision on the Cramér-Rao Bound(CRB) in the presence of aliasing and noise.
基金Supported by the of Doctoral Foundation of the State Education Commission of China
文摘Multipath time delay estimation is constrained by the width of the signal correlation function when using correlation based methods. This paper obtains a high resolution time delay estimation by introducing Burg algorithm and Marple algorithm of the maximum entropy power spectral estimation to non-resolvable multipath time delay estimatoin. The principles, the performaces and the results of computer simulation are given.
文摘A diagnostic procedure based on maximum likelihood estimation, to study the convergence of the Markov chain produced by Gibbs sampler, is presented. The unbiasedness, consistent and asymptotic normality are considered for the estimation of the parameters produced by the procedure. An example is provided to illustrate the procedure, and the numerical result is consistent with the theoretical one.
文摘In this paper maximum ranked set sampling procedure with unequal samples (MRSSU) is proposed. Maximum likelihood estimator and modified maximum likelihood estimator are obtained and their properties are studied under exponential distribution. These methods are studied under both perfect and imperfect ranking (with errors in ranking). These estimators are then compared with estimators based on simple random sampling (SRS) and ranked set sampling (RSS) procedures. It is shown that relative efficiencies of the estimators based on MRSSU are better than those of the estimator based on SRS. Simulation results show that efficiency of proposed estimator is better than estimator based on RSS under ranking error.
基金National CNC Special Project,China(No.2010ZX04001-032)the Youth Science and Technology Foundation of Gansu Province,China(No.145RJYA307)
文摘Aiming at the solving problem of improved nonhomogeneous Poisson process( NHPP) model in engineering application,the immune clone maximum likelihood estimation( MLE)method for solving model parameters was proposed. The minimum negative log-likelihood function was used as the objective function to optimize instead of using iterative method to solve complex system of equations,and the problem of parameter estimation of improved NHPP model was solved by immune clone algorithm. And the interval estimation of reliability indices was given by using fisher information matrix method and delta method. An example of failure truncated data from multiple numerical control( NC) machine tools was taken to prove the method. and the results show that the algorithm has a higher convergence rate and computational accuracy, which demonstrates the feasibility of the method.
文摘A blind adaptive scheme is proposed for joint maximum likelihood （ML） channel estimation and data detection of singleinput multiple-output （SIMO） systems. The joint ML optimisation over channel and data is decomposed into an iterative optimisation loop. An efficient global optimisation algorithm called the repeated weighted boosting search is employed at the upper level to optimally identify the unknown SIMO channel model, and the Viterbi algorithm is used at the lower level to produce the maximum likelihood sequence estimation of the unknown data sequence. A simulation example is used to demonstrate the effectiveness of this joint ML optimisation scheme for blind adaptive SIMO systems.
