Addressing the challenges posed by the nonlinear and non-stationary vibrations in rotating machinery,where weak fault characteristic signals hinder accurate fault state representation,we propose a novel feature extrac...Addressing the challenges posed by the nonlinear and non-stationary vibrations in rotating machinery,where weak fault characteristic signals hinder accurate fault state representation,we propose a novel feature extraction method that combines the Flexible Analytic Wavelet Transform(FAWT)with Nonlinear Quantum Permutation Entropy.FAWT,leveraging fractional orders and arbitrary scaling and translation factors,exhibits superior translational invariance and adjustable fundamental oscillatory characteristics.This flexibility enables FAWT to provide well-suited wavelet shapes,effectively matching subtle fault components and avoiding performance degradation associated with fixed frequency partitioning and low-oscillation bases in detecting weak faults.In our approach,gearbox vibration signals undergo FAWT to obtain sub-bands.Quantum theory is then introduced into permutation entropy to propose Nonlinear Quantum Permutation Entropy,a feature that more accurately characterizes the operational state of vibration simulation signals.The nonlinear quantum permutation entropy extracted from sub-bands is utilized to characterize the operating state of rotating machinery.A comprehensive analysis of vibration signals from rolling bearings and gearboxes validates the feasibility of the proposed method.Comparative assessments with parameters derived from traditional permutation entropy,sample entropy,wavelet transform(WT),and empirical mode decomposition(EMD)underscore the superior effectiveness of this approach in fault detection and classification for rotating machinery.展开更多
Remarkable progress has been achieved on microseismic signal denoising in recent years,which is the basic component for rock-burst detection.However,its denoising effectiveness remains unsatisfactory.To extract the ef...Remarkable progress has been achieved on microseismic signal denoising in recent years,which is the basic component for rock-burst detection.However,its denoising effectiveness remains unsatisfactory.To extract the effective microseismic signal from polluted noisy signals,a novel microseismic signal denoising method that combines the variational mode decomposition(VMD)and permutation entropy(PE),which we denote as VMD–PE,is proposed in this paper.VMD is a recently introduced technique for adaptive signal decomposition,where K is an important decomposing parameter that determines the number of modes.VMD provides a predictable eff ect on the nature of detected modes.In this work,we present a method that addresses the problem of selecting an appropriate K value by constructing a simulation signal whose spectrum is similar to that of a mine microseismic signal and apply this value to the VMD–PE method.In addition,PE is developed to identify the relevant effective microseismic signal modes,which are reconstructed to realize signal filtering.The experimental results show that the VMD–PE method remarkably outperforms the empirical mode decomposition(EMD)–VMD filtering and detrended fl uctuation analysis(DFA)–VMD denoising methods of the simulated and real microseismic signals.We expect that this novel method can inspire and help evaluate new ideas in this field.展开更多
Bearings are crucial components in rotating machines,which have direct effects on industrial productivity and safety.To fast and accurately identify the operating condition of bearings,a novel method based on multi⁃sc...Bearings are crucial components in rotating machines,which have direct effects on industrial productivity and safety.To fast and accurately identify the operating condition of bearings,a novel method based on multi⁃scale permutation entropy(MPE)and morphology similarity distance(MSD)is proposed in this paper.Firstly,the MPE values of the original signals were calculated to characterize the complexity in different scales and they constructed feature vectors after normalization.Then,the MSD was employed to measure the distance among test samples from different fault types and the reference samples,and achieved classification with the minimum MSD.Finally,the proposed method was verified with two experiments concerning artificially seeded damage bearings and run⁃to⁃failure bearings,respectively.Different categories were considered for the two experiments and high classification accuracies were obtained.The experimental results indicate that the proposed method is effective and feasible in bearing fault diagnosis.展开更多
The power output state of photovoltaic power generation is affected by the earth’s rotation and solar radiation intensity.On the one hand,its output sequence has daily periodicity;on the other hand,it has discrete ra...The power output state of photovoltaic power generation is affected by the earth’s rotation and solar radiation intensity.On the one hand,its output sequence has daily periodicity;on the other hand,it has discrete randomness.With the development of new energy economy,the proportion of photovoltaic energy increased accordingly.In order to solve the problem of improving the energy conversion efficiency in the grid-connected optical network and ensure the stability of photovoltaic power generation,this paper proposes the short-termprediction of photovoltaic power generation based on the improvedmulti-scale permutation entropy,localmean decomposition and singular spectrum analysis algorithm.Firstly,taking the power output per unit day as the research object,the multi-scale permutation entropy is used to calculate the eigenvectors under different weather conditions,and the cluster analysis is used to reconstruct the historical power generation under typical weather rainy and snowy,sunny,abrupt,cloudy.Then,local mean decomposition(LMD)is used to decompose the output sequence,so as to extract more detail components of the reconstructed output sequence.Finally,combined with the weather forecast of the Meteorological Bureau for the next day,the singular spectrumanalysis algorithm is used to predict the photovoltaic classification of the recombination decomposition sequence under typical weather.Through the verification and analysis of examples,the hierarchical prediction experiments of reconstructed and non-reconstructed output sequences are compared.The results show that the algorithm proposed in this paper is effective in realizing the short-term prediction of photovoltaic generator,and has the advantages of simple structure and high prediction accuracy.展开更多
With temperatures increasing as a result of global warming,extreme high temperatures are becoming more intense and more frequent on larger scale during summer in China.In recent years,a variety of researches have exam...With temperatures increasing as a result of global warming,extreme high temperatures are becoming more intense and more frequent on larger scale during summer in China.In recent years,a variety of researches have examined the high temperature distribution in China.However,it hardly considers the variation of temperature data and systems when defining the threshold of extreme high temperature.In order to discern the spatio-temporal distribution of extreme heat in China,we examined the daily maximum temperature data of 83 observation stations in China from 1950 to 2008.The objective of this study was to understand the distribution characteristics of extreme high temperature events defined by Detrended Fluctuation Analysis(DFA).The statistical methods of Permutation Entropy(PE)were also used in this study to analyze the temporal distribution.The results showed that the frequency of extreme high temperature events in China presented 3 periods of 7,10—13 and 16—20 years,respectively.The abrupt changes generally happened in the 1960s,the end of 1970s and early 1980s.It was also found that the maximum frequency occurred in the early 1950s,and the frequency decreased sharply until the late 1980s when an evidently increasing trend emerged.Furthermore,the annual averaged frequency of extreme high temperature events reveals a decreasing-increasing-decreasing trend from southwest to northeast China,but an increasing-decreasing trend from southeast to northwest China.And the frequency was higher in southern region than that in northern region.Besides,the maximum and minimum of frequencies were relatively concentrated spatially.Our results also shed light on the reasons for the periods and abrupt changes of the frequency of extreme high temperature events in China.展开更多
Bearing fault signal is nonlinear and non-stationary, therefore proposed a fault feature extraction method based on wavelet packet decomposition （WPD） and local mean decomposition （LMD） permutation entropy, which ...Bearing fault signal is nonlinear and non-stationary, therefore proposed a fault feature extraction method based on wavelet packet decomposition （WPD） and local mean decomposition （LMD） permutation entropy, which is based on the support vector machine （SVM） as the feature vector pattern recognition device Firstly, the wavelet packet analysis method is used to denoise the original vibration signal, and the frequency band division and signal reconstruction are carried out according to the characteristic frequency. Then the decomposition of the reconstructed signal is decomposed into a number of product functions （PE） by the local mean decomposition （LMD） , and the permutation entropy of the PF component which contains the main fault information is calculated to realize the feature quantization of the PF component. Finally, the entropy feature vector input multi-classification SVM, which is used to determine the type of fault and fault degree of bearing The experimental results show that the recognition rate of rolling bearing fault diagnosis is 95%. Comparing with other methods, the present this method can effectively extract the features of bearing fault and has a higher recognition accuracy展开更多
Predicting the usage of container cloud resources has always been an important and challenging problem in improving the performance of cloud resource clusters.We proposed an integrated prediction method of stacking co...Predicting the usage of container cloud resources has always been an important and challenging problem in improving the performance of cloud resource clusters.We proposed an integrated prediction method of stacking container cloud resources based on variational modal decomposition(VMD)-Permutation entropy(PE)and long short-term memory(LSTM)neural network to solve the prediction difficulties caused by the non-stationarity and volatility of resource data.The variational modal decomposition algorithm decomposes the time series data of cloud resources to obtain intrinsic mode function and residual components,which solves the signal decomposition algorithm’s end-effect and modal confusion problems.The permutation entropy is used to evaluate the complexity of the intrinsic mode function,and the reconstruction based on similar entropy and low complexity is used to reduce the difficulty of modeling.Finally,we use the LSTM and stacking fusion models to predict and superimpose;the stacking integration model integrates Gradient boosting regression(GBR),Kernel ridge regression(KRR),and Elastic net regression(ENet)as primary learners,and the secondary learner adopts the kernel ridge regression method with solid generalization ability.The Amazon public data set experiment shows that compared with Holt-winters,LSTM,and Neuralprophet models,we can see that the optimization range of multiple evaluation indicators is 0.338∼1.913,0.057∼0.940,0.000∼0.017 and 1.038∼8.481 in root means square error(RMSE),mean absolute error(MAE),mean absolute percentage error(MAPE)and variance(VAR),showing its stability and better prediction accuracy.展开更多
Purpose–High-speed turnouts are more complex in structure and thus may cause abnormal vibration of highspeed train car body,affecting driving safety and passenger riding experience.Therefore,it is necessary to analyz...Purpose–High-speed turnouts are more complex in structure and thus may cause abnormal vibration of highspeed train car body,affecting driving safety and passenger riding experience.Therefore,it is necessary to analyze the data characteristics of continuous hunting of high-speed trains passing through turnouts and propose a diagnostic method for engineering applications.Design/methodology/approach–First,Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)is performed to determine the first characteristic component of the car body’s lateral acceleration.Then,the Short-Time Fourier Transform(STFT)is performed to calculate the marginal spectra.Finally,the presence of a continuous hunting problem is determined based on the results of the comparison calculations and diagnostic thresholds.To improve computational efficiency,permutation entropy(PE)is used as a fast indicator to identify turnouts with potential problems.Findings–Under continuous hunting conditions,the PE is less than 0.90;the ratio of the maximum peak value of the signal component to the original signal peak value exceeded 0.7,and there is an energy band in the STFT time-frequency map,which corresponds to a frequency distribution range of 1–2 Hz.Originality/value–The research results have revealed the lateral vibration characteristics of the high-speed train’s car body during continuous hunting when passing through turnouts.On this basis,an effective diagnostic method has been proposed.With a focus on practical engineering applications,a rapid screening index for identifying potential issues has been proposed,significantly enhancing the efficiency of diagnostic processes.展开更多
Feature extraction is an important part of signal processing,which is significant for signal detection,classification,and recognition.The nonlinear dynamic analysis method can extract the nonlinear characteristics of ...Feature extraction is an important part of signal processing,which is significant for signal detection,classification,and recognition.The nonlinear dynamic analysis method can extract the nonlinear characteristics of signals and is widely used in different fields.Reverse dispersion entropy(RDE)proposed by us recently,as a nonlinear dynamic analysis method,has the advantages of fast computing speed and strong anti-noise ability,which is more suitable for measuring the complexity of signal than traditional permutation entropy(PE)and dispersion entropy(DE).Empirical wavelet transform(EWT),based on the theory of wavelet analysis,can decompose a complex non-stationary signal into a number of empirical wavelet functions(EWFs)with compact support set spectrum,which has better decomposition performance than empirical mode decomposition(EMD)and its improved algorithms.Considering the advantages of RDE and EWT,on the one hand,we introduce EWT into the field of underwater acoustic signal processing and fault diagnosis to improve the signal decomposition accuracy;on the other hand,we use RDE as the features of EWFs to improve the signal separability and stability.Finally,we propose a novel signal feature extraction technology based on EWT and RDE in this paper.Experimental results show that the proposed feature extraction technology can effectively extract the complexity features of actual signals.Moreover,it also has higher distinguishing ability for different types of signals than five latest feature extraction technologies.展开更多
排列时间不可逆性是量化复杂系统非平衡特征的重要方法,但排列类型无法表征序列的精确结构特征.本文提出了一种模糊排列时间不可逆(fuzzy permutation time irreversibility,fpTIR)方法,利用负指数函数转化向量元素差值,计算向量幅度排...排列时间不可逆性是量化复杂系统非平衡特征的重要方法,但排列类型无法表征序列的精确结构特征.本文提出了一种模糊排列时间不可逆(fuzzy permutation time irreversibility,fpTIR)方法,利用负指数函数转化向量元素差值,计算向量幅度排列的隶属度,进而比较正反序列模糊排列的概率分布差异.作为对照,通过香农熵计算模糊排列概率分布的平均信息量,即模糊排列熵(fuzzy permutation entropy,fPEn),用以衡量系统的复杂度.本文首先利用logistic和Henon混沌系统以及一阶自回归模型构建测试序列,通过代替数据理论验证fpTIR和fPEn的有效性,然后分析PhysioNet数据库中的心衰、健康老年及健康年轻心率的复杂特征.结果表明,fpTIR可有效表征系统的非平衡性特征,并且提高了心率信号分析的准确度.由于fpTIR和fPEn采用不同的概率分布分析方法,两者在混沌序列验证中存在差异,甚至在心率信号的分析中出现相反的结果,其中fpTIR的分析结果与心率复杂度丢失理论一致.总之,本文研究不仅精准表征了序列的排列空间结构,优化了复杂系统非平衡性分析的效果,而且为从非平衡动力学和熵值复杂度两个角度探索复杂系统特征提供了新的视角和理论依据.展开更多
基金supported financially by FundamentalResearch Program of Shanxi Province(No.202103021223056).
文摘Addressing the challenges posed by the nonlinear and non-stationary vibrations in rotating machinery,where weak fault characteristic signals hinder accurate fault state representation,we propose a novel feature extraction method that combines the Flexible Analytic Wavelet Transform(FAWT)with Nonlinear Quantum Permutation Entropy.FAWT,leveraging fractional orders and arbitrary scaling and translation factors,exhibits superior translational invariance and adjustable fundamental oscillatory characteristics.This flexibility enables FAWT to provide well-suited wavelet shapes,effectively matching subtle fault components and avoiding performance degradation associated with fixed frequency partitioning and low-oscillation bases in detecting weak faults.In our approach,gearbox vibration signals undergo FAWT to obtain sub-bands.Quantum theory is then introduced into permutation entropy to propose Nonlinear Quantum Permutation Entropy,a feature that more accurately characterizes the operational state of vibration simulation signals.The nonlinear quantum permutation entropy extracted from sub-bands is utilized to characterize the operating state of rotating machinery.A comprehensive analysis of vibration signals from rolling bearings and gearboxes validates the feasibility of the proposed method.Comparative assessments with parameters derived from traditional permutation entropy,sample entropy,wavelet transform(WT),and empirical mode decomposition(EMD)underscore the superior effectiveness of this approach in fault detection and classification for rotating machinery.
基金supported by the National Natural Science Foundation of China(No.51904173)Shandong Provincial Natural Science Foundation(No.ZR2018MEE008)the Project of Shandong Province Higher Educational Science and Technology Program(No.J18KA307).
文摘Remarkable progress has been achieved on microseismic signal denoising in recent years,which is the basic component for rock-burst detection.However,its denoising effectiveness remains unsatisfactory.To extract the effective microseismic signal from polluted noisy signals,a novel microseismic signal denoising method that combines the variational mode decomposition(VMD)and permutation entropy(PE),which we denote as VMD–PE,is proposed in this paper.VMD is a recently introduced technique for adaptive signal decomposition,where K is an important decomposing parameter that determines the number of modes.VMD provides a predictable eff ect on the nature of detected modes.In this work,we present a method that addresses the problem of selecting an appropriate K value by constructing a simulation signal whose spectrum is similar to that of a mine microseismic signal and apply this value to the VMD–PE method.In addition,PE is developed to identify the relevant effective microseismic signal modes,which are reconstructed to realize signal filtering.The experimental results show that the VMD–PE method remarkably outperforms the empirical mode decomposition(EMD)–VMD filtering and detrended fl uctuation analysis(DFA)–VMD denoising methods of the simulated and real microseismic signals.We expect that this novel method can inspire and help evaluate new ideas in this field.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51505100)
文摘Bearings are crucial components in rotating machines,which have direct effects on industrial productivity and safety.To fast and accurately identify the operating condition of bearings,a novel method based on multi⁃scale permutation entropy(MPE)and morphology similarity distance(MSD)is proposed in this paper.Firstly,the MPE values of the original signals were calculated to characterize the complexity in different scales and they constructed feature vectors after normalization.Then,the MSD was employed to measure the distance among test samples from different fault types and the reference samples,and achieved classification with the minimum MSD.Finally,the proposed method was verified with two experiments concerning artificially seeded damage bearings and run⁃to⁃failure bearings,respectively.Different categories were considered for the two experiments and high classification accuracies were obtained.The experimental results indicate that the proposed method is effective and feasible in bearing fault diagnosis.
文摘The power output state of photovoltaic power generation is affected by the earth’s rotation and solar radiation intensity.On the one hand,its output sequence has daily periodicity;on the other hand,it has discrete randomness.With the development of new energy economy,the proportion of photovoltaic energy increased accordingly.In order to solve the problem of improving the energy conversion efficiency in the grid-connected optical network and ensure the stability of photovoltaic power generation,this paper proposes the short-termprediction of photovoltaic power generation based on the improvedmulti-scale permutation entropy,localmean decomposition and singular spectrum analysis algorithm.Firstly,taking the power output per unit day as the research object,the multi-scale permutation entropy is used to calculate the eigenvectors under different weather conditions,and the cluster analysis is used to reconstruct the historical power generation under typical weather rainy and snowy,sunny,abrupt,cloudy.Then,local mean decomposition(LMD)is used to decompose the output sequence,so as to extract more detail components of the reconstructed output sequence.Finally,combined with the weather forecast of the Meteorological Bureau for the next day,the singular spectrumanalysis algorithm is used to predict the photovoltaic classification of the recombination decomposition sequence under typical weather.Through the verification and analysis of examples,the hierarchical prediction experiments of reconstructed and non-reconstructed output sequences are compared.The results show that the algorithm proposed in this paper is effective in realizing the short-term prediction of photovoltaic generator,and has the advantages of simple structure and high prediction accuracy.
基金Key Projects in the National Science & Technology Pillar Program during the Eleventh Five-Year Plan Period(2007BAC29B05)Jiangsu Key Laboratory of Meteorological Disaster(KLME05005)
文摘With temperatures increasing as a result of global warming,extreme high temperatures are becoming more intense and more frequent on larger scale during summer in China.In recent years,a variety of researches have examined the high temperature distribution in China.However,it hardly considers the variation of temperature data and systems when defining the threshold of extreme high temperature.In order to discern the spatio-temporal distribution of extreme heat in China,we examined the daily maximum temperature data of 83 observation stations in China from 1950 to 2008.The objective of this study was to understand the distribution characteristics of extreme high temperature events defined by Detrended Fluctuation Analysis(DFA).The statistical methods of Permutation Entropy(PE)were also used in this study to analyze the temporal distribution.The results showed that the frequency of extreme high temperature events in China presented 3 periods of 7,10—13 and 16—20 years,respectively.The abrupt changes generally happened in the 1960s,the end of 1970s and early 1980s.It was also found that the maximum frequency occurred in the early 1950s,and the frequency decreased sharply until the late 1980s when an evidently increasing trend emerged.Furthermore,the annual averaged frequency of extreme high temperature events reveals a decreasing-increasing-decreasing trend from southwest to northeast China,but an increasing-decreasing trend from southeast to northwest China.And the frequency was higher in southern region than that in northern region.Besides,the maximum and minimum of frequencies were relatively concentrated spatially.Our results also shed light on the reasons for the periods and abrupt changes of the frequency of extreme high temperature events in China.
基金supported by the National Natural Science Foundation of China(51375405)Independent Project of the State Key Laboratory of Traction Power(2016TP-10)
文摘Bearing fault signal is nonlinear and non-stationary, therefore proposed a fault feature extraction method based on wavelet packet decomposition （WPD） and local mean decomposition （LMD） permutation entropy, which is based on the support vector machine （SVM） as the feature vector pattern recognition device Firstly, the wavelet packet analysis method is used to denoise the original vibration signal, and the frequency band division and signal reconstruction are carried out according to the characteristic frequency. Then the decomposition of the reconstructed signal is decomposed into a number of product functions （PE） by the local mean decomposition （LMD） , and the permutation entropy of the PF component which contains the main fault information is calculated to realize the feature quantization of the PF component. Finally, the entropy feature vector input multi-classification SVM, which is used to determine the type of fault and fault degree of bearing The experimental results show that the recognition rate of rolling bearing fault diagnosis is 95%. Comparing with other methods, the present this method can effectively extract the features of bearing fault and has a higher recognition accuracy
基金The National Natural Science Foundation of China (No.62262011)The Natural Science Foundation of Guangxi (No.2021JJA170130).
文摘Predicting the usage of container cloud resources has always been an important and challenging problem in improving the performance of cloud resource clusters.We proposed an integrated prediction method of stacking container cloud resources based on variational modal decomposition(VMD)-Permutation entropy(PE)and long short-term memory(LSTM)neural network to solve the prediction difficulties caused by the non-stationarity and volatility of resource data.The variational modal decomposition algorithm decomposes the time series data of cloud resources to obtain intrinsic mode function and residual components,which solves the signal decomposition algorithm’s end-effect and modal confusion problems.The permutation entropy is used to evaluate the complexity of the intrinsic mode function,and the reconstruction based on similar entropy and low complexity is used to reduce the difficulty of modeling.Finally,we use the LSTM and stacking fusion models to predict and superimpose;the stacking integration model integrates Gradient boosting regression(GBR),Kernel ridge regression(KRR),and Elastic net regression(ENet)as primary learners,and the secondary learner adopts the kernel ridge regression method with solid generalization ability.The Amazon public data set experiment shows that compared with Holt-winters,LSTM,and Neuralprophet models,we can see that the optimization range of multiple evaluation indicators is 0.338∼1.913,0.057∼0.940,0.000∼0.017 and 1.038∼8.481 in root means square error(RMSE),mean absolute error(MAE),mean absolute percentage error(MAPE)and variance(VAR),showing its stability and better prediction accuracy.
基金support from the funds of National Natural Science Foundation of China(52308473)China Academy of Railway Science Corporation Limited(2022YJ192)are gratefully acknowledged。
文摘Purpose–High-speed turnouts are more complex in structure and thus may cause abnormal vibration of highspeed train car body,affecting driving safety and passenger riding experience.Therefore,it is necessary to analyze the data characteristics of continuous hunting of high-speed trains passing through turnouts and propose a diagnostic method for engineering applications.Design/methodology/approach–First,Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)is performed to determine the first characteristic component of the car body’s lateral acceleration.Then,the Short-Time Fourier Transform(STFT)is performed to calculate the marginal spectra.Finally,the presence of a continuous hunting problem is determined based on the results of the comparison calculations and diagnostic thresholds.To improve computational efficiency,permutation entropy(PE)is used as a fast indicator to identify turnouts with potential problems.Findings–Under continuous hunting conditions,the PE is less than 0.90;the ratio of the maximum peak value of the signal component to the original signal peak value exceeded 0.7,and there is an energy band in the STFT time-frequency map,which corresponds to a frequency distribution range of 1–2 Hz.Originality/value–The research results have revealed the lateral vibration characteristics of the high-speed train’s car body during continuous hunting when passing through turnouts.On this basis,an effective diagnostic method has been proposed.With a focus on practical engineering applications,a rapid screening index for identifying potential issues has been proposed,significantly enhancing the efficiency of diagnostic processes.
基金the supported by National Natural Science Foundation of China(No.61871318 and 11574250)Scientific Research Plan Projects of Shaanxi Education Department(No.19JK0568).
文摘Feature extraction is an important part of signal processing,which is significant for signal detection,classification,and recognition.The nonlinear dynamic analysis method can extract the nonlinear characteristics of signals and is widely used in different fields.Reverse dispersion entropy(RDE)proposed by us recently,as a nonlinear dynamic analysis method,has the advantages of fast computing speed and strong anti-noise ability,which is more suitable for measuring the complexity of signal than traditional permutation entropy(PE)and dispersion entropy(DE).Empirical wavelet transform(EWT),based on the theory of wavelet analysis,can decompose a complex non-stationary signal into a number of empirical wavelet functions(EWFs)with compact support set spectrum,which has better decomposition performance than empirical mode decomposition(EMD)and its improved algorithms.Considering the advantages of RDE and EWT,on the one hand,we introduce EWT into the field of underwater acoustic signal processing and fault diagnosis to improve the signal decomposition accuracy;on the other hand,we use RDE as the features of EWFs to improve the signal separability and stability.Finally,we propose a novel signal feature extraction technology based on EWT and RDE in this paper.Experimental results show that the proposed feature extraction technology can effectively extract the complexity features of actual signals.Moreover,it also has higher distinguishing ability for different types of signals than five latest feature extraction technologies.
