Static Poisson’s ratio(vs)is crucial for determining geomechanical properties in petroleum applications,namely sand production.Some models have been used to predict vs;however,the published models were limited to spe...Static Poisson’s ratio(vs)is crucial for determining geomechanical properties in petroleum applications,namely sand production.Some models have been used to predict vs;however,the published models were limited to specific data ranges with an average absolute percentage relative error(AAPRE)of more than 10%.The published gated recurrent unit(GRU)models do not consider trend analysis to show physical behaviors.In this study,we aim to develop a GRU model using trend analysis and three inputs for predicting n s based on a broad range of data,n s(value of 0.1627-0.4492),bulk formation density(RHOB)(0.315-2.994 g/mL),compressional time(DTc)(44.43-186.9 μs/ft),and shear time(DTs)(72.9-341.2μ s/ft).The GRU model was evaluated using different approaches,including statistical error an-alyses.The GRU model showed the proper trends,and the model data ranges were wider than previous ones.The GRU model has the largest correlation coefficient(R)of 0.967 and the lowest AAPRE,average percent relative error(APRE),root mean square error(RMSE),and standard deviation(SD)of 3.228%,1.054%,4.389,and 0.013,respectively,compared to other models.The GRU model has a high accuracy for the different datasets:training,validation,testing,and the whole datasets with R and AAPRE values were 0.981 and 2.601%,0.966 and 3.274%,0.967 and 3.228%,and 0.977 and 2.861%,respectively.The group error analyses of all inputs show that the GRU model has less than 5% AAPRE for all input ranges,which is superior to other models that have different AAPRE values of more than 10% at various ranges of inputs.展开更多
In this study, extender and bender element tests were conducted investigating the small-strain Poisson’s ratio of variable sands, with a focus on the effect of stress anisotropy in order to quantify the sensitivity o...In this study, extender and bender element tests were conducted investigating the small-strain Poisson’s ratio of variable sands, with a focus on the effect of stress anisotropy in order to quantify the sensitivity of Poisson’s ratio to the applied deviatoric stress. Four different uniform sands were tested, including a biogenic sand, a crushed rock and two natural sands, covering a wide range of particle shapes. From these sands, eleven samples were prepared in the laboratory and were tested under variable stress paths,maintaining a constant mean effective pressure while increasing the deviatoric compressive load. Under the application of these given stress paths, the data analysis indicated that the sensitivity of Poisson’s ratio to the stress ratio was more pronounced for sands with irregularly shaped particles in comparison to sands with fairly rounded and spherical grains. For sands with very irregularly shaped particles, the increase of Poisson’s ratio from the isotropic to the anisotropic stress state reached 50%, while this increase for natural sands with fairly rounded particles was in the order of 20%.展开更多
基金The authors thank the Yayasan Universiti Teknologi PETRONAS(YUTP FRG Grant No.015LC0-428)at Universiti Teknologi PETRO-NAS for supporting this study.
文摘Static Poisson’s ratio(vs)is crucial for determining geomechanical properties in petroleum applications,namely sand production.Some models have been used to predict vs;however,the published models were limited to specific data ranges with an average absolute percentage relative error(AAPRE)of more than 10%.The published gated recurrent unit(GRU)models do not consider trend analysis to show physical behaviors.In this study,we aim to develop a GRU model using trend analysis and three inputs for predicting n s based on a broad range of data,n s(value of 0.1627-0.4492),bulk formation density(RHOB)(0.315-2.994 g/mL),compressional time(DTc)(44.43-186.9 μs/ft),and shear time(DTs)(72.9-341.2μ s/ft).The GRU model was evaluated using different approaches,including statistical error an-alyses.The GRU model showed the proper trends,and the model data ranges were wider than previous ones.The GRU model has the largest correlation coefficient(R)of 0.967 and the lowest AAPRE,average percent relative error(APRE),root mean square error(RMSE),and standard deviation(SD)of 3.228%,1.054%,4.389,and 0.013,respectively,compared to other models.The GRU model has a high accuracy for the different datasets:training,validation,testing,and the whole datasets with R and AAPRE values were 0.981 and 2.601%,0.966 and 3.274%,0.967 and 3.228%,and 0.977 and 2.861%,respectively.The group error analyses of all inputs show that the GRU model has less than 5% AAPRE for all input ranges,which is superior to other models that have different AAPRE values of more than 10% at various ranges of inputs.
基金the financial support by the grant from the Research Grant Council of the Hong Kong Special Administrative Region(HKSAR)China Project No.9041880(City U112813)the start-up grant of the College of Science and Engineering,City University of Hong Kong(Code:7200533-ACE)
文摘In this study, extender and bender element tests were conducted investigating the small-strain Poisson’s ratio of variable sands, with a focus on the effect of stress anisotropy in order to quantify the sensitivity of Poisson’s ratio to the applied deviatoric stress. Four different uniform sands were tested, including a biogenic sand, a crushed rock and two natural sands, covering a wide range of particle shapes. From these sands, eleven samples were prepared in the laboratory and were tested under variable stress paths,maintaining a constant mean effective pressure while increasing the deviatoric compressive load. Under the application of these given stress paths, the data analysis indicated that the sensitivity of Poisson’s ratio to the stress ratio was more pronounced for sands with irregularly shaped particles in comparison to sands with fairly rounded and spherical grains. For sands with very irregularly shaped particles, the increase of Poisson’s ratio from the isotropic to the anisotropic stress state reached 50%, while this increase for natural sands with fairly rounded particles was in the order of 20%.
