Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunb...Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.展开更多
Polylactic acid(PLA)is a potential polymer material used as a substitute for traditional plastics,and the accurate molecular weight distribution range of PLA is strictly required in practical applications.Therefore,ex...Polylactic acid(PLA)is a potential polymer material used as a substitute for traditional plastics,and the accurate molecular weight distribution range of PLA is strictly required in practical applications.Therefore,exploring the relationship between synthetic conditions and PLA molecular weight is crucially important.In this work,direct polycondensation combined with overlay sampling uniform design(OSUD)was applied to synthesize the low molecular weight PLA.Then a multiple regression model and two artificial neural network models on PLA molecular weight versus reaction temperature,reaction time,and catalyst dosage were developed for PLA molecular weight prediction.The characterization results indicated that the low molecular weight PLA was efficiently synthesized under this method.Meanwhile,the experimental dataset acquired from OSUD successfully established three predictive models for PLA molecular weight.Among them,both artificial neural network models had significantly better predictive performance than the regression model.Notably,the radial basis function neural network model had the best predictive accuracy with only 11.9%of mean relative error on the validation dataset,which improved by 67.7%compared with the traditional multiple regression model.This work successfully predicted PLA molecular weight in a direct polycondensation process using artificial neural network models combined with OSUD,which provided guidance for the future implementation of molecular weight-controlled polymer's synthesis.展开更多
[Objective] The aim of this work was to identify molecular weight （MW） distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both...[Objective] The aim of this work was to identify molecular weight （MW） distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spec-trometry （MALDI-TOF-MS）. Fish skin were treated by the alkaline protease 2709. [Result] The optional conditions for hyerolysis were time 3 h, temperature 55 ℃, pH 10.0, substrate concentration 80 g/L and E/S 4%. The results of both methods indi-cated that the molecular weight of col agen hydrolysates was from 400 to 1 800 Da, and the peptides’ molecular weight was less than 1 400 Da mostly. The reducing power and antioxidant/radical scavenging activity [1, 1-diphenyl-2-picryl-hydrazyl （DPPH） free radical scavenging activity] were determined. [Conclusion] The results reveal that the fishskin hydrolysate is a potential source of antioxidants.展开更多
Process parameters on enzymatic hydrolysis and molecular weight （MW） distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor...Process parameters on enzymatic hydrolysis and molecular weight （MW） distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor and orthogonal experiments. The molecular weight distribution of hydrolysates was determined using both Sephadex G25 partition and high speed liquid chromatography electricity spray mass spectrum （HPLC-ESI-MS）. Collagen hydrolysates were first gained by an alkaline protease ＂alcalase＂ for 3 h at temperature （50~C）, pH （10.0）, substrate concentration （75 g L-~）, and E/S （3%）. The molecular weight distribution of collagen hydrolysates ranged from 300 to 1 500 Da, and most of peptides were under 1 200 Da. Sephadex G25 partition and HPLC-ESI-MS should be successfully employed to determine the molecular weight distribution of collagen hydrolysates.展开更多
Neodymium chloride isopropanol complex （NdCl3.3＇prOH） activated by modified methylaluminoxane （MMAO） was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum （Al） compounds, [Al...Neodymium chloride isopropanol complex （NdCl3.3＇prOH） activated by modified methylaluminoxane （MMAO） was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum （Al） compounds, [Al]/[Nd] ratio, polymerization temperature and time. NdCl3＇3iprOH exhibited high activity producing polymers feasting high cis-l,4 stereospecificity （〉 96%）, very high molecular weight （Mn 〉 1.0 × 10^6） and fairly narrow molecular weight distribution （MWD, Mw/Mn 〈 2.0） simultaneously. In comparison, neodymium isopropoxide also showed high activity providing polymers with narrow MWD （Mw/Mn = 2.07）, but somewhat low cis-1,4 content （ca. 92%）, while neodymium chloride had no activity under present polymerization conditions. The Al compounds affected the polymer yield in the order of Al（i-Bu）3 〉 MMAO 〉 Al（i-Bu）2H. MMAO as cocatalyst afforded polyisoprene with high Mn over 1.0 × 10^6, whereas as stronger chain transfer agent than MMAO, AI（i-Bu）3 and AI（i-Bu）EH yielded polymers with low Mn （1.0 × 10^5-8.0 × 10^5）. NdCl3·3＇PrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low [Al]/[Nd] ratio of 30, and the produced polymer remained high cis-1,4 content of 95.8% along with high Mn over 1.0× 10^6 even at elevated temperatures up to 70℃. The polymerization rate is of the first order with respect to the concentration of isoprene. The mechanism of active species formation was discussed preliminarily.展开更多
The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluoresc...The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluorescence detection. The elution curves obtained by absorbance and fluorescence techniques expressed similar patterns, with the exception of diminishing of large fraction and the peaks behind several seconds in fluorescence chromatograms. According to its molecular weight (MW), DOM in water samples is divided into several fractions: large ({>3.5} kDa); medium-large ({3.5}-{2.0} kDa); medium ({2.0}-{1.0} kDa) and small ({<1.0} kDa). The average molecular weight was calculated using the elution curve detected by UV-vis absorbance and fluorescence detection techniques. The results showed that the weight-average molecular weight (Mw) and number-average molecular weight (Mn) calculated by UV-vis absorbance techniques range from 1750 to 2050 Dalton and from 1450 to 1850 Dalton, respectively. And the Mw and Mn obtained by fluorescence detection are lower by 50 to 400 Dalton. As a reference, the molecular weight of Fluka humic acid (FHA) is larger than that of water samples by about 200 Dalton. The average molecular weight of DOM for water samples collected in March and July was compared. The results revealed that the molecular weight is lower for water samples obtained in July than that obtained in March, indicating the ambient environment has an influence on the molecular weight, including photo-degradation and biological activity.展开更多
The composition and vertical profiles of low molecular-weight organic acids （LMWOAs） and the contribution of them to dissolved organic matter （DOM） in sediment porewaters in Bosten Lake, Xinjiang, China were inves...The composition and vertical profiles of low molecular-weight organic acids （LMWOAs） and the contribution of them to dissolved organic matter （DOM） in sediment porewaters in Bosten Lake, Xinjiang, China were investigated. The results showed that total concentration of LMWOAs was up to 94.5 μmol/L and their proportion in DOM was 5.6%, suggesting that LMWOAs were important chemical components in DOM in lake sediment porewaters. Among the seven LMWOAs, pyruvic and acetic acid had the highest concentrations with 26.30 and 8.31 μmol/L, accounting for 51.4% and 14.92% of LMWOAs, respectively. Trifluoroacetic and sorbic acid had the lowest concentrations, indicating that the compositions of LMWOAs in relative reducing environments were largely different from those reported in glacier, atmosphere and soils. The concentrations of lactic, acetic, formic, sorbic and oxalic acid decreased with increasing depth, probably relating to stronger microbial activities in the initial stage of early diagenesis. Trifluoroacetic acid was mainly anthropogenic with its concentration, showing a diusive trend from the surface to bottom sediments. The concentrations of lactic acid and nitrate generally showed a consistent profile. The increasing concentration of pyruvic acid in the vertical profile was just opposite to that of sulfate, revealing a significant negative relationship between them. Oxalic acid remained constant except for an obvious peak at 6 cm depth. The results indicated the diversities in sources and behaviors for various LMWOAs during early diagenesis in sediments.展开更多
The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-...The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...展开更多
[ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with vi...[ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with viscosity method and gel permeation chromatography （GPC） method. [ Method] In viscosity method, cadmium ethylenediamine was used as the solvent, intrinsic viscosity η of the solution was determined at 25 ℃ by using a Ubbelohde viscometer, to calculate the molecular weight of cellulose; in GPC method, 8% LiC1 / N, N-dimethylacetamide （LiC1/DMAc） was used as the solvent and 0.5% LiC1/DMAc was used as the mobile phase to determine the relative molecular weight and distribution of cellulose and cellulose microspheres. In addition, the determination results were analyzed to compare these two methods. [ Result ] Viscosity-average molecular weight Mr/ of cellulose and cellulose microspheres determined with viscosity method were 224,532 and 16,686, respectively; weight-average molecular weight Mw of cellulose and cellulose microspheres determined with GPC method were 284,196 and 22,345, respectively. [ Conclusion] The determination results of （;PC method are relatively close to the actual value and could truly reflect the characteristics of molecular weialat distribution of eellulose and cellulose mierosr, heres.展开更多
In accordance with the memory function of Gaussian chain constraints in entangled polymermelts a set of material functions related to a certain"test flow"are formulated from the O-W-Ftype constitutive equati...In accordance with the memory function of Gaussian chain constraints in entangled polymermelts a set of material functions related to a certain"test flow"are formulated from the O-W-Ftype constitutive equation by the appropriate selection of the Cauchy-Green and Finger tensors.Thedependences of these material functions on the strain rate and the dependences of the linearviscoelastic functions on the primary molecular weight distribution and the entanglement sites sequencedistribution on polymer chain are derived from a multiple-entanglement model and a couple of mech-anisms of relaxation for the loop and terminal entanglement sites.When the primary polymer chainsare modelled with the Lansing-Kraemer molecular distribution function,a set of new relationshipsamong linear viscoelastic functions(η<sub>0</sub>,ψ<sub>10</sub><sup>0</sup>,η<sub>ext</sub><sup>0</sup> and τ<sub>1</sub>)and the molecular weights and their distributionare formulated.These functions and relationships are verified with experimental data.展开更多
The lumped time distribution functions were proposed, which can be used for describing the dynamicsystems with two or more than two states of the end of growing polymer chain during chain addition polymerization.Numer...The lumped time distribution functions were proposed, which can be used for describing the dynamicsystems with two or more than two states of the end of growing polymer chain during chain addition polymerization.Numerical analysis of the lumped time distribution functions was carried out. The method for calculating molecularweight distribution of polymer in the stable free radical polymerization and more general cases was developed basedon the lumped time distribution functions.展开更多
In this study, the relationship between skin structure and shear strength distribution of thin-wall injection molded polypropylene (PP) molded at different molecular weight and molecular distribution was investigated....In this study, the relationship between skin structure and shear strength distribution of thin-wall injection molded polypropylene (PP) molded at different molecular weight and molecular distribution was investigated. Skin-core structure, cross-sectional morphology, crystallinity, crystal orientation, crystal morphology and molecular orientation were evaluated by using polarized optical microscope, differential scanning calorimeter, X-ray spectroscopic analyzer and laser Raman spectroscopy, respectively, while the shear strength distribution was investigated using a micro cutting method called SAICAS (Surface And Interfacial Cutting Analysis System). The results indicated that the difference of molecular weight and molecular weight distribution showed own skin layer thickness. Especially, high molecular weight sample showed thicker layer of the lamellar orientation and molecular orientation than low molecular weight sample. In addition, wide molecular distribution sample showed large crystal orientation layer.展开更多
Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-...Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-core structure affects the property of completed injection molding parts (bulk property) even if in thin-wall injection molding. However, there is a few research about the relationship between bulk property and internal property distribution in the injection molding specimen. In this study, thin-wall injection molded parts of polypropylene (PP) were prepared by 4 different molecular weight and molecular weight distribution to reveal the relationship between bulk property and property distribution. These characteristics were investigated by using tensile test, fracture toughness characterized by Essential Work of Fracture (EWF) method for bulk property and film tensile test by sliced sample for tensile property distribution. The property distribution test results revealed that the highly bulk property sample had thicker highly mechanical property layer on its surface.展开更多
By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared h...By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.展开更多
Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and...Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.展开更多
Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE...Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE who underwent lumbar spine surgery in Peking Union Medical College Hospital from January 2004 to April 2011 were included in the present study. All the patients received a half dose of LMWH 6 hours after surgery followed by a full dose LMWH once per day until discharge. We recorded incidences of deep venous thrombosis (DVT), pulmonary embolism (PE), bleeding complications, and medication side effects. Results Seventy-eight consecutive patients were eligible and enrolled in this study. The mean hospital stat was 8.5±4.5 days. No symptomatic DVT, PE, or major bleeding events were observed. One patient developed wound ecchymosis, another developed wound bleeding, four had mild hepatic aminotransferase level elevation, and one developed a suspicious allergic reaction. Conclusion LMWH may be applied as an effective and safe prophylaxis for VTE in high-risk patients undergoing lumbar decompression surgery.展开更多
BACKGROUND Gastrointestinal cancer(GICA)is associated with a higher incidence of venous thromboembolism(VTE)compared to other solid tumors,moreover,recurrent VTE and major bleeding(MB)complications during anticoagulat...BACKGROUND Gastrointestinal cancer(GICA)is associated with a higher incidence of venous thromboembolism(VTE)compared to other solid tumors,moreover,recurrent VTE and major bleeding(MB)complications during anticoagulation treatment have an associated increase rate.GICA-VTE remains a challenging clinical scenario with MB concerns for utilization of direct oral anticoagulants(DOAC),especially with active cancer therapies.AIM To evaluate patient risk factors,effectiveness(VTE)and safety(MB)of DOACs and low molecular weight heparin(LMWH)in patients with active GICA-VTE.METHODS A retrospective chart review of patients receiving DOACs and LMWH with GICA and symptomatic or incidental VTE treated at comprehensive cancer center from November 2013 to February 2017 was performed.Inclusion criteria included active GI cancer diagnosed at any stage or treatment+/-6 mo of VTE diagnosis,whom were prescribed 6 mo or more of DOACs or LMWH.The Chi-squared test was used for overall and the Fisher exact test for pairwise comparisons of the proportions of patients experiencing recurrent VTE and MB events.Odds ratios were used to compare the relative odds of the occurrence of the outcome given exposure to the risk factor.RESULTS A total of 144 patients were prescribed anticoagulation,in which 106 fulfilled inclusion criteria apixaban(27.3%),rivaroxaban(34.9%)and enoxaparin(37.7%),and 38 were excluded.Patients median age was 66.5 years at GICA diagnosis and 67 years at CAVTE event,with 62%males,80%Caucasian,70%stage IV,pancreatic cancer(40.5%),30%Khorana Score(≥3 points),and 43.5%on active chemotherapy.Sixty-four percent of patients completed anticoagulation therapy(range 1 to 43 mo).Recurrent VTE at 6 mo was noted in 7.5%(n=3),6.8%(n=2)and 2.7%(n=1)of patients on enoxaparin,apixaban and rivaroxaban,respectively(all P=NS).MB at 6 mo were 5%(n=2)for enoxaparin,6.8%(n=2)for apixaban and 21.6%(n=8)for rivaroxaban(overall P=0.048;vs LMWH P=0.0423;all other P=NS).Significant predictors of a primary or secondary outcome for all anticoagulation therapies included:Active systemic treatment(OR=5.1,95%CI:1.3-19.3),high Khorana Score[≥3 points](OR=5.5,95%CI:1.7-17.1),active smoker(OR=6.7,95%CI:2.1-21.0),pancreatic cancer(OR=6.8,95%CI:1.9-23.2),and stage IV disease(OR=9.9,95%CI:1.2-79.1).CONCLUSION Rivaroxaban compared to apixaban and enoxaparin had a significantly higher risk of MB on GICA-VTE patients with equivocal efficacy.展开更多
Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the pro...Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the protein in orderto obtain free protein glucans coded as LNP-I_1,LNP-I_2.LNP-I_3 and LNP-I_4(LNP-I).The free-protein polysaccharideswere sulfated to give derivatives(S-LNP-I)with degree of substitution(DS)from 0.4-0.8.The structural features andweight-average molecular weight(M_w)of the samples were investigated by using infrared spectroscopy,elemental analysis,^(13)C-NMR,size exclusion chromatography combined with laser light scattering(SEC-LLS)and viscometry.The effects ofstructure and conformation of the polysaccharides on antitumor activities were assayed in vivo(Sarcoma 180 solid tumors)and in vitro(Sarcoma 180,HL-60,MCF-7 and Vero tumors).The results indicated that the predominant species of thesamples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethylsulfoxide(DMSO)as single-flexible chains.Interestingly,the antitumor activities of LNP-I are lower than those of the nativeglucans(L-I),whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I.The resultsreveal that the binding of protein,sulfated modification and the triple helix conformation are important factors in theenhancement of the antitumor activities of polysaccharides on the whole.展开更多
Heparin has been used as an anticoagulant drug for many years, but it has significant side ef fects. In the search for good substitutes, low molecular weight(MW) polysaccharides from S argassum fusiforme have been exa...Heparin has been used as an anticoagulant drug for many years, but it has significant side ef fects. In the search for good substitutes, low molecular weight(MW) polysaccharides from S argassum fusiforme have been examined and confi rmed to possess biological activities. Here, S. fusiforme polysaccharides(SFP) were extracted and subjected to a hydrogen peroxide(H_2O_2) oxidation method for the preparation of low-MW SFP(LSFP). The effects of temperature, pH, and H_2O_2 concentration on the degradation process were also examined. Several LSFP of 36, 9, 5.7, and 2.7 kDa were obtained under different conditions, and their anticoagulant activities studied in vitro. The results showed that SFP and LSFP prolonged activated partial thromboplastin(APTT), prothrombin(PT) and thrombin times(TT) significantly, indicating that these low MW polysaccharides possessed anticoagulant activity in the intrinsic, extrinsic, and common coagulation pathways. As these ef fects were related to the MW of the polysaccharides in APTT and TT but not in PT, the contents of the monosaccharide fucose and sulfate and the polysaccharide MW could have exerted combined ef fects. The details of this mechanism require further verifi cation.展开更多
With a production of 208.2 m3/d, heavy oil was produced by drill stem test (DST) from three shallow reservoirs in Sand Group Nos. Ⅰ and Ⅲ of the Neogene Guantao Formation (NgⅠ and NgⅢ) and the Eogene Dongying Form...With a production of 208.2 m3/d, heavy oil was produced by drill stem test (DST) from three shallow reservoirs in Sand Group Nos. Ⅰ and Ⅲ of the Neogene Guantao Formation (NgⅠ and NgⅢ) and the Eogene Dongying Formation (Ed) in an exploratory well Ban-14-1 within the Qianmiqiao region, Bohai Bay Basin, northern China. Based on the GC and GC-MS data of the NgⅠ and NgⅢ heavy oil samples, all n-alkanes and most isoprenoid hydrocarbons are lost and the GC baseline appears as an evident 'hump', implying a large quantity of unresolved complex mixture (UCM), which typically revealed a result of heavy biodegradation. However, there still is a complete series of C14-C73 n-alkanes in the high-temperature gas chromatograms (HTGC) of the heavy oil, among which, the abundance of C30- n-alkanes are drastically reduced. The C35-C55 high molecular weight (HMW) n-alkanes are at high abundance and show a normal distribution pattern with major peak at C43 and an obvious odd-carbon-number predominance with CPI37-55 and OEP45-49 values of 1.17 and 1.16-1.20, respectively. According to GC-MS analysis, the heavy oil is characterized by dual source inputs of aquatic microbes and terrestrial higher plants. Various steranes and tricyclic terpanes indicate an algal origin, and hopane-type triterpanes, C24 tetracyclic terpane and drimane series show the bacterial contribution. With the odd-carbon-number preference, HMW n-alkanes provide significant information not only on higher plant source input and immaturity, but also on the strong resistibility to biodegradation.展开更多
基金supported by Korea Institute of Marine Science&Technology Promotion(KIMST)funded by the Ministry of Oceans and Fisheries,Korea(20220488)。
文摘Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.
基金funded by the Zhejiang Provincial Natural Science Foundation of China(LD21B060001)the National Natural Science Foundation of China(22078296,21576240).
文摘Polylactic acid(PLA)is a potential polymer material used as a substitute for traditional plastics,and the accurate molecular weight distribution range of PLA is strictly required in practical applications.Therefore,exploring the relationship between synthetic conditions and PLA molecular weight is crucially important.In this work,direct polycondensation combined with overlay sampling uniform design(OSUD)was applied to synthesize the low molecular weight PLA.Then a multiple regression model and two artificial neural network models on PLA molecular weight versus reaction temperature,reaction time,and catalyst dosage were developed for PLA molecular weight prediction.The characterization results indicated that the low molecular weight PLA was efficiently synthesized under this method.Meanwhile,the experimental dataset acquired from OSUD successfully established three predictive models for PLA molecular weight.Among them,both artificial neural network models had significantly better predictive performance than the regression model.Notably,the radial basis function neural network model had the best predictive accuracy with only 11.9%of mean relative error on the validation dataset,which improved by 67.7%compared with the traditional multiple regression model.This work successfully predicted PLA molecular weight in a direct polycondensation process using artificial neural network models combined with OSUD,which provided guidance for the future implementation of molecular weight-controlled polymer's synthesis.
基金Supported by Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi,China(2010127)~~
文摘[Objective] The aim of this work was to identify molecular weight （MW） distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spec-trometry （MALDI-TOF-MS）. Fish skin were treated by the alkaline protease 2709. [Result] The optional conditions for hyerolysis were time 3 h, temperature 55 ℃, pH 10.0, substrate concentration 80 g/L and E/S 4%. The results of both methods indi-cated that the molecular weight of col agen hydrolysates was from 400 to 1 800 Da, and the peptides’ molecular weight was less than 1 400 Da mostly. The reducing power and antioxidant/radical scavenging activity [1, 1-diphenyl-2-picryl-hydrazyl （DPPH） free radical scavenging activity] were determined. [Conclusion] The results reveal that the fishskin hydrolysate is a potential source of antioxidants.
基金supported by Tianjin Committee of Science & Technology, China (06YFGZSH02300)
文摘Process parameters on enzymatic hydrolysis and molecular weight （MW） distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor and orthogonal experiments. The molecular weight distribution of hydrolysates was determined using both Sephadex G25 partition and high speed liquid chromatography electricity spray mass spectrum （HPLC-ESI-MS）. Collagen hydrolysates were first gained by an alkaline protease ＂alcalase＂ for 3 h at temperature （50~C）, pH （10.0）, substrate concentration （75 g L-~）, and E/S （3%）. The molecular weight distribution of collagen hydrolysates ranged from 300 to 1 500 Da, and most of peptides were under 1 200 Da. Sephadex G25 partition and HPLC-ESI-MS should be successfully employed to determine the molecular weight distribution of collagen hydrolysates.
基金supported by the Administration of Science and Technology of Jilin Province,China (No.200505254)
文摘Neodymium chloride isopropanol complex （NdCl3.3＇prOH） activated by modified methylaluminoxane （MMAO） was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum （Al） compounds, [Al]/[Nd] ratio, polymerization temperature and time. NdCl3＇3iprOH exhibited high activity producing polymers feasting high cis-l,4 stereospecificity （〉 96%）, very high molecular weight （Mn 〉 1.0 × 10^6） and fairly narrow molecular weight distribution （MWD, Mw/Mn 〈 2.0） simultaneously. In comparison, neodymium isopropoxide also showed high activity providing polymers with narrow MWD （Mw/Mn = 2.07）, but somewhat low cis-1,4 content （ca. 92%）, while neodymium chloride had no activity under present polymerization conditions. The Al compounds affected the polymer yield in the order of Al（i-Bu）3 〉 MMAO 〉 Al（i-Bu）2H. MMAO as cocatalyst afforded polyisoprene with high Mn over 1.0 × 10^6, whereas as stronger chain transfer agent than MMAO, AI（i-Bu）3 and AI（i-Bu）EH yielded polymers with low Mn （1.0 × 10^5-8.0 × 10^5）. NdCl3·3＇PrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low [Al]/[Nd] ratio of 30, and the produced polymer remained high cis-1,4 content of 95.8% along with high Mn over 1.0× 10^6 even at elevated temperatures up to 70℃. The polymerization rate is of the first order with respect to the concentration of isoprene. The mechanism of active species formation was discussed preliminarily.
文摘The molecular weight distribution (MWD) of dissolved organic matter (DOM) in lake waters from Lake Hongfeng was examined using high performance size exclusion chromatography (HPSEC) with UV-vis absorbance and fluorescence detection. The elution curves obtained by absorbance and fluorescence techniques expressed similar patterns, with the exception of diminishing of large fraction and the peaks behind several seconds in fluorescence chromatograms. According to its molecular weight (MW), DOM in water samples is divided into several fractions: large ({>3.5} kDa); medium-large ({3.5}-{2.0} kDa); medium ({2.0}-{1.0} kDa) and small ({<1.0} kDa). The average molecular weight was calculated using the elution curve detected by UV-vis absorbance and fluorescence detection techniques. The results showed that the weight-average molecular weight (Mw) and number-average molecular weight (Mn) calculated by UV-vis absorbance techniques range from 1750 to 2050 Dalton and from 1450 to 1850 Dalton, respectively. And the Mw and Mn obtained by fluorescence detection are lower by 50 to 400 Dalton. As a reference, the molecular weight of Fluka humic acid (FHA) is larger than that of water samples by about 200 Dalton. The average molecular weight of DOM for water samples collected in March and July was compared. The results revealed that the molecular weight is lower for water samples obtained in July than that obtained in March, indicating the ambient environment has an influence on the molecular weight, including photo-degradation and biological activity.
基金supported by the National Basic Research Program (973) of China (No. 2008CB418200)the National Natural Science Foundation of China (No.U0833603, 40632011, 40873080)
文摘The composition and vertical profiles of low molecular-weight organic acids （LMWOAs） and the contribution of them to dissolved organic matter （DOM） in sediment porewaters in Bosten Lake, Xinjiang, China were investigated. The results showed that total concentration of LMWOAs was up to 94.5 μmol/L and their proportion in DOM was 5.6%, suggesting that LMWOAs were important chemical components in DOM in lake sediment porewaters. Among the seven LMWOAs, pyruvic and acetic acid had the highest concentrations with 26.30 and 8.31 μmol/L, accounting for 51.4% and 14.92% of LMWOAs, respectively. Trifluoroacetic and sorbic acid had the lowest concentrations, indicating that the compositions of LMWOAs in relative reducing environments were largely different from those reported in glacier, atmosphere and soils. The concentrations of lactic, acetic, formic, sorbic and oxalic acid decreased with increasing depth, probably relating to stronger microbial activities in the initial stage of early diagenesis. Trifluoroacetic acid was mainly anthropogenic with its concentration, showing a diusive trend from the surface to bottom sediments. The concentrations of lactic acid and nitrate generally showed a consistent profile. The increasing concentration of pyruvic acid in the vertical profile was just opposite to that of sulfate, revealing a significant negative relationship between them. Oxalic acid remained constant except for an obvious peak at 6 cm depth. The results indicated the diversities in sources and behaviors for various LMWOAs during early diagenesis in sediments.
文摘The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidation ...
基金Supported by Natural Science Foundation of Guangxi(0991024Z)
文摘[ Objective ] This study aimed to provide basic data for studying the relationship between structure and property of cellulose microspheres by measuring molecular weight of cellulose and cellulose microspheres with viscosity method and gel permeation chromatography （GPC） method. [ Method] In viscosity method, cadmium ethylenediamine was used as the solvent, intrinsic viscosity η of the solution was determined at 25 ℃ by using a Ubbelohde viscometer, to calculate the molecular weight of cellulose; in GPC method, 8% LiC1 / N, N-dimethylacetamide （LiC1/DMAc） was used as the solvent and 0.5% LiC1/DMAc was used as the mobile phase to determine the relative molecular weight and distribution of cellulose and cellulose microspheres. In addition, the determination results were analyzed to compare these two methods. [ Result ] Viscosity-average molecular weight Mr/ of cellulose and cellulose microspheres determined with viscosity method were 224,532 and 16,686, respectively; weight-average molecular weight Mw of cellulose and cellulose microspheres determined with GPC method were 284,196 and 22,345, respectively. [ Conclusion] The determination results of （;PC method are relatively close to the actual value and could truly reflect the characteristics of molecular weialat distribution of eellulose and cellulose mierosr, heres.
文摘In accordance with the memory function of Gaussian chain constraints in entangled polymermelts a set of material functions related to a certain"test flow"are formulated from the O-W-Ftype constitutive equation by the appropriate selection of the Cauchy-Green and Finger tensors.Thedependences of these material functions on the strain rate and the dependences of the linearviscoelastic functions on the primary molecular weight distribution and the entanglement sites sequencedistribution on polymer chain are derived from a multiple-entanglement model and a couple of mech-anisms of relaxation for the loop and terminal entanglement sites.When the primary polymer chainsare modelled with the Lansing-Kraemer molecular distribution function,a set of new relationshipsamong linear viscoelastic functions(η<sub>0</sub>,ψ<sub>10</sub><sup>0</sup>,η<sub>ext</sub><sup>0</sup> and τ<sub>1</sub>)and the molecular weights and their distributionare formulated.These functions and relationships are verified with experimental data.
文摘The lumped time distribution functions were proposed, which can be used for describing the dynamicsystems with two or more than two states of the end of growing polymer chain during chain addition polymerization.Numerical analysis of the lumped time distribution functions was carried out. The method for calculating molecularweight distribution of polymer in the stable free radical polymerization and more general cases was developed basedon the lumped time distribution functions.
文摘In this study, the relationship between skin structure and shear strength distribution of thin-wall injection molded polypropylene (PP) molded at different molecular weight and molecular distribution was investigated. Skin-core structure, cross-sectional morphology, crystallinity, crystal orientation, crystal morphology and molecular orientation were evaluated by using polarized optical microscope, differential scanning calorimeter, X-ray spectroscopic analyzer and laser Raman spectroscopy, respectively, while the shear strength distribution was investigated using a micro cutting method called SAICAS (Surface And Interfacial Cutting Analysis System). The results indicated that the difference of molecular weight and molecular weight distribution showed own skin layer thickness. Especially, high molecular weight sample showed thicker layer of the lamellar orientation and molecular orientation than low molecular weight sample. In addition, wide molecular distribution sample showed large crystal orientation layer.
文摘Thin-wall injection molded parts have been paid much attention to the lightweight saving from viewpoints of natural resources saving. In the injection molding, skin-core structure can be found in the parts. This skin-core structure affects the property of completed injection molding parts (bulk property) even if in thin-wall injection molding. However, there is a few research about the relationship between bulk property and internal property distribution in the injection molding specimen. In this study, thin-wall injection molded parts of polypropylene (PP) were prepared by 4 different molecular weight and molecular weight distribution to reveal the relationship between bulk property and property distribution. These characteristics were investigated by using tensile test, fracture toughness characterized by Essential Work of Fracture (EWF) method for bulk property and film tensile test by sliced sample for tensile property distribution. The property distribution test results revealed that the highly bulk property sample had thicker highly mechanical property layer on its surface.
基金Funded by the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan Univesity of Technology。
文摘By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.
基金New Century Excellent Talents in University of China(NCET-05-0358)the National Natural Science Foundation of China(20625308)
文摘Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.
文摘Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE who underwent lumbar spine surgery in Peking Union Medical College Hospital from January 2004 to April 2011 were included in the present study. All the patients received a half dose of LMWH 6 hours after surgery followed by a full dose LMWH once per day until discharge. We recorded incidences of deep venous thrombosis (DVT), pulmonary embolism (PE), bleeding complications, and medication side effects. Results Seventy-eight consecutive patients were eligible and enrolled in this study. The mean hospital stat was 8.5±4.5 days. No symptomatic DVT, PE, or major bleeding events were observed. One patient developed wound ecchymosis, another developed wound bleeding, four had mild hepatic aminotransferase level elevation, and one developed a suspicious allergic reaction. Conclusion LMWH may be applied as an effective and safe prophylaxis for VTE in high-risk patients undergoing lumbar decompression surgery.
基金The University of Arizona Hematology and Medical Oncology Fellowship program
文摘BACKGROUND Gastrointestinal cancer(GICA)is associated with a higher incidence of venous thromboembolism(VTE)compared to other solid tumors,moreover,recurrent VTE and major bleeding(MB)complications during anticoagulation treatment have an associated increase rate.GICA-VTE remains a challenging clinical scenario with MB concerns for utilization of direct oral anticoagulants(DOAC),especially with active cancer therapies.AIM To evaluate patient risk factors,effectiveness(VTE)and safety(MB)of DOACs and low molecular weight heparin(LMWH)in patients with active GICA-VTE.METHODS A retrospective chart review of patients receiving DOACs and LMWH with GICA and symptomatic or incidental VTE treated at comprehensive cancer center from November 2013 to February 2017 was performed.Inclusion criteria included active GI cancer diagnosed at any stage or treatment+/-6 mo of VTE diagnosis,whom were prescribed 6 mo or more of DOACs or LMWH.The Chi-squared test was used for overall and the Fisher exact test for pairwise comparisons of the proportions of patients experiencing recurrent VTE and MB events.Odds ratios were used to compare the relative odds of the occurrence of the outcome given exposure to the risk factor.RESULTS A total of 144 patients were prescribed anticoagulation,in which 106 fulfilled inclusion criteria apixaban(27.3%),rivaroxaban(34.9%)and enoxaparin(37.7%),and 38 were excluded.Patients median age was 66.5 years at GICA diagnosis and 67 years at CAVTE event,with 62%males,80%Caucasian,70%stage IV,pancreatic cancer(40.5%),30%Khorana Score(≥3 points),and 43.5%on active chemotherapy.Sixty-four percent of patients completed anticoagulation therapy(range 1 to 43 mo).Recurrent VTE at 6 mo was noted in 7.5%(n=3),6.8%(n=2)and 2.7%(n=1)of patients on enoxaparin,apixaban and rivaroxaban,respectively(all P=NS).MB at 6 mo were 5%(n=2)for enoxaparin,6.8%(n=2)for apixaban and 21.6%(n=8)for rivaroxaban(overall P=0.048;vs LMWH P=0.0423;all other P=NS).Significant predictors of a primary or secondary outcome for all anticoagulation therapies included:Active systemic treatment(OR=5.1,95%CI:1.3-19.3),high Khorana Score[≥3 points](OR=5.5,95%CI:1.7-17.1),active smoker(OR=6.7,95%CI:2.1-21.0),pancreatic cancer(OR=6.8,95%CI:1.9-23.2),and stage IV disease(OR=9.9,95%CI:1.2-79.1).CONCLUSION Rivaroxaban compared to apixaban and enoxaparin had a significantly higher risk of MB on GICA-VTE patients with equivocal efficacy.
基金This work was supported by the National Natural Science Foundation of China(No.20074025).
文摘Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the protein in orderto obtain free protein glucans coded as LNP-I_1,LNP-I_2.LNP-I_3 and LNP-I_4(LNP-I).The free-protein polysaccharideswere sulfated to give derivatives(S-LNP-I)with degree of substitution(DS)from 0.4-0.8.The structural features andweight-average molecular weight(M_w)of the samples were investigated by using infrared spectroscopy,elemental analysis,^(13)C-NMR,size exclusion chromatography combined with laser light scattering(SEC-LLS)and viscometry.The effects ofstructure and conformation of the polysaccharides on antitumor activities were assayed in vivo(Sarcoma 180 solid tumors)and in vitro(Sarcoma 180,HL-60,MCF-7 and Vero tumors).The results indicated that the predominant species of thesamples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethylsulfoxide(DMSO)as single-flexible chains.Interestingly,the antitumor activities of LNP-I are lower than those of the nativeglucans(L-I),whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I.The resultsreveal that the binding of protein,sulfated modification and the triple helix conformation are important factors in theenhancement of the antitumor activities of polysaccharides on the whole.
基金Supported by the Ocean Public Welfare Scientifi c Research Project,State Oceanic Administration of the People’s Republic of China(No.201505033)the Qingdao People’s Livelihood Science and Technology Program(No.16-6-2-41-nsh)
文摘Heparin has been used as an anticoagulant drug for many years, but it has significant side ef fects. In the search for good substitutes, low molecular weight(MW) polysaccharides from S argassum fusiforme have been examined and confi rmed to possess biological activities. Here, S. fusiforme polysaccharides(SFP) were extracted and subjected to a hydrogen peroxide(H_2O_2) oxidation method for the preparation of low-MW SFP(LSFP). The effects of temperature, pH, and H_2O_2 concentration on the degradation process were also examined. Several LSFP of 36, 9, 5.7, and 2.7 kDa were obtained under different conditions, and their anticoagulant activities studied in vitro. The results showed that SFP and LSFP prolonged activated partial thromboplastin(APTT), prothrombin(PT) and thrombin times(TT) significantly, indicating that these low MW polysaccharides possessed anticoagulant activity in the intrinsic, extrinsic, and common coagulation pathways. As these ef fects were related to the MW of the polysaccharides in APTT and TT but not in PT, the contents of the monosaccharide fucose and sulfate and the polysaccharide MW could have exerted combined ef fects. The details of this mechanism require further verifi cation.
基金Th is study was supported by the National Natural Science Foundation of China(NSFC,no.40172056)the Research Fund for the Doctoral Program of Higher Education,China(RFDP,no.2000042506).
文摘With a production of 208.2 m3/d, heavy oil was produced by drill stem test (DST) from three shallow reservoirs in Sand Group Nos. Ⅰ and Ⅲ of the Neogene Guantao Formation (NgⅠ and NgⅢ) and the Eogene Dongying Formation (Ed) in an exploratory well Ban-14-1 within the Qianmiqiao region, Bohai Bay Basin, northern China. Based on the GC and GC-MS data of the NgⅠ and NgⅢ heavy oil samples, all n-alkanes and most isoprenoid hydrocarbons are lost and the GC baseline appears as an evident 'hump', implying a large quantity of unresolved complex mixture (UCM), which typically revealed a result of heavy biodegradation. However, there still is a complete series of C14-C73 n-alkanes in the high-temperature gas chromatograms (HTGC) of the heavy oil, among which, the abundance of C30- n-alkanes are drastically reduced. The C35-C55 high molecular weight (HMW) n-alkanes are at high abundance and show a normal distribution pattern with major peak at C43 and an obvious odd-carbon-number predominance with CPI37-55 and OEP45-49 values of 1.17 and 1.16-1.20, respectively. According to GC-MS analysis, the heavy oil is characterized by dual source inputs of aquatic microbes and terrestrial higher plants. Various steranes and tricyclic terpanes indicate an algal origin, and hopane-type triterpanes, C24 tetracyclic terpane and drimane series show the bacterial contribution. With the odd-carbon-number preference, HMW n-alkanes provide significant information not only on higher plant source input and immaturity, but also on the strong resistibility to biodegradation.
